My location: United States
Previous image
Riff Box 2
Next image
Zoom image

Riff Box 2

Riff box 2 is the new JTAG tool by the original riff box jtag team. Supporting JTAG / SPi / iSP / i2C connectivity

In stock (16 items available).
  • $157.88
Market price: $173.02, you save $15.14
  • 9% less
Qty:  
  • SKU
    riffbox2
  • UPC/ISBN
    00712096157369

Riff Box 2

After six successful years since the first RIFF Box hardware was released, we are proud to introduce the new RIFF Box 2 hardware.

Below you can read the basics about it. Of course, this is preliminary and just a start. RIFF Box 2 hardware is designed so that it can accommodate a large variety of communication protocols, including those of highest importance for starters.

 

RIFF BOX 2 Hardware Specification

  • Dual-core Cortex-M4 MCU @ 204MHz
  • PC to Box USB (Device) Speed: Hi-Speed (480 Mbps)
  • Box to Device (Host) Speed: Full-Speed (48 Mbps)
  • SD/MMC Interface with 1-Bit (DAT0) and 4-Bit (DAT0-DAT3) Bus Width support and SD_CLK up to 52 MHz
  • UART Interface
  • RIFF  Smart Probing Feature
  • Level-adjustable 23 GPIO Lines (1.65V to 3.6V) for interfacing a range of devices and protocols, such as NAND, SPI, I2C, Pin Finder, etc.
  • 4 fixed 3.3V GPIO Lines

 

RIFF BOX 2 Interface Specification

  • 20-Pin Male Connector:
    JTAG Interface: TRST, TDI, TMS, TCK, RTCK, TDO and NRST
    SWD (Serial Wire Debug) Interface: SWCLK, SWDIO (SWDIO and SWCLK are overlaid on the TMS and TCK pins)
  • 30-Pin Male Connector:
    SD/MMC Interface 1/4Bit @ 52MHz
    Level-adjustable 23 GPIO Lines (1.65V to 3.6V)
    USB Device Connector: connects the Box with PC @ Hi-Speed (480 Mbps), approx. 20 MByte/sec
  • USB Host Connector: connects the Box with USB devices @ Full-Speed (48 Mbps), approx. 1.5-2 MByte/sec
  • RJ-45 Connector:
    RIFF  Smart Probing Feature
    UART Port
    4 Fixed 3.3V GPIO Lines


 

Supported SD/MMD Revisions:
Revisions 1.0 to 1.7 (for MMC: v4.0, v4.1, v4.2, v4.3, v4.41, v4.5, v4.51, v5.0) and higher

 

Supported JTAG Cores:

  • ARM7,
  • ARM920,
  • ARM926,
  • ARM946,
  • ARM7EJS,
  • ARM11,
  • CORTEX-A5,
  • CORTEX-A8,
  • CORTEX-A9,
  • CORTEX-A15,
  • OMAP3430,
  • OMAP3630,
  • OMAP4430,
  • TEGRA2 (CORTEX-A9),
  • TEGRA2 (ARM7),
  • QUALCOMM S3 (ARM7, ARM11, SCORPION),
  • QUALCOMM S4 (ARM7, ARM11, SCORPION),
  • NOVATHOR,
  • PXA270,
  • PXA312
  • MIPS32  IR5Bit,
  • MIPS32  IR8Bit,

 

New hardware and software is fully compatible with Windows 10, which provides effortless installation. Just connect RIFF Box to Windows 10 based PC and everything will be installed automatically. For older Windows versions, there are custom drivers provided with RIFF JTAG Manager installer.

 

 

RIFF Box 2 Features

RIFF Box 2 JTAG firmware supports following features at the moment:

  • ARM7/ARM9/ARM11  PXA3xx,  PXA270, Cortex-A8, OMAP850, Cortex-A9 , Cortex-A15, Cortex-A5 Dual/Quad cores support
  • Multiple  devices  on  JTAG  chain  are supported, thus TAP number selection is available
  • Any custom voltage  level selection  from range ~1.4V to 3.3V
  • TCK/Adaptive clocking selection
  • Halt core (NRST is not changed)
  • Reset core (NRST is applied before halt)
  • Direct  Read  memory  (by  8/16/32-bit bytes/half-words/words)
  • Direct  Write  memory  (by  8/16/32-bit bytes/half-words/words)
  • Access  to  the  control  registers  of ARM core (coprocessor 15)
  • Program code breakpoints
  • Run core
  • Custom scripting and DCC loader support (trace32 compatible)
  • Custom GDB Server Available
  • I/O pins detection !Unique feature offered only by RIFF JTAG
  • i2C Connectivitysupported
  • iSP Connectivity supported
  • SPi Connectivity supported
  • eMMC Connectivity supported

 

This is list of supported memory controllers and chipsets and CPU cores using Direct Memory Access :

Currently supported memory controllers are:

  • OneNAND Memory (connected directly to the MCUs address space)
  • CFI Compliant NOR Memory with CFI Command sets 0x0001, 0x0002, 0x0200 and 0x0003
  • NAND Controller in MSM6250, MSM6250A
  • NAND Controller in QSC6055, QSC6085, QSC6240, QSC6270
  • NAND Controller in MDM6085, MDM6200, MDM6600
  • NAND Controller in MSM6245, MSM6246, MSM6270, MSM6275, MSM6280, MSM6280A, MSM6281, MSM6290, MSM6800A, MSM6801A
  • NAND Controller and OneNAND Controller in MSM7225, MSM7227, MSM7625, MSM7627
  • NAND Controller in MSM7200, MSM7200A, MSM7201A, MSM7500, MSM7500A, MSM7501A, MSM7600
  • NAND Controller in QSD8250, QSD8650
  • eMMC Controller #2 in MSM7230, MSM8255, MSM8255T
  • eMMC Controller #0 in S5PV310


Currently supported chipsets and cores for JTAG I/O operations:

  • Generic ARM Cores: ARM7, ARM9 (ARM920, ARM926, ARM946), ARM11, CORTEX-A8,CORTEX-A9
  • Qualcomm QSC Family: QSC1100, QSC1110, QSC6010, QSC6020, QSC6030, QSC6055, QSC6085, QSC6240, QSC6270
  • Qualcomm MSM Family: MSM6000, MSM6150, MSM6245, MSM6246, MSM6250, MSM6250A, MSM6260, MSM6275, MSM6280, MSM6280A, MSM6281, MSM6800A, MSM6801A, MSM6290, MSM7225, MSM7227, MSM7625, MSM7627, MSM7230, MSM8255, MSM8255T, MSM8260
  • Qualcomm QSD Family: QSD8250, QSD8650
  • Qualcomm ESM Family: ESM7602A
  • Qualcomm MDM Family: MDM6085 MDM6200, MDM6600
  • OMAP Family: OMAP1710, OMAP3430, OMAP3630, OMAP4430
  • NVIDIA Family: TEGRA2
  • Marvell/XScale Family: PXA270, PXA271, PXA272, PXA310, PXA312, PXA320.
  • Samsung Processors: S5P6422, S5PV310.

Worldwide Delivery available on this item.

We offer multiple delivery methods for this item, add the item to cart and checkout to view and select your desired shipping method.

Customer reviews
Average rating:

Score: 5.00 (votes: 1)
Rating of votes (1)
5
 
1customers
4
 
 
0customers
3
 
 
0customers
2
 
 
0customers
1
 
 
0customers
 
  • Lawrence Dorsey
    Monday, January 2, 2017, 12:22
    very good tool! works great

We accept the following payment methods:

We also accept telephone orders, Purchase Orders and Bank transfer payments.

 

Returns Policy

At FoneFunShop Ltd. we have every confidence that you will be delighted with your purchase. However, in the event that you wish to return any goods purchased, then please follow the applicable policy detailed below.

 

Unwanted Goods - within 14 Days

You (the buyer) pay for return shipping fees.

You should inform FoneFunShop Ltd. in writing, within 14 days of receiving your item(s) either by post or by using the contact form of any return request.

You can return unwanted items within 14 calendar days of delivery and we will refund you the price paid for the items. In addition to the refund on your items; if your return request is received within 14 days of delivery, and items received within the following 14 days, then we will refund the cheapest, standard delivery option to you, unless there is another item on your order. Outside of 14 days from receipt, refunds for non-faulty returned items will not include the original delivery charge or the cost of delivering the items to us.

If you return a product to us that is not received in a brand new condition we reserve the right to return the product to you, or issue a partial refund with a deduction because the item is not fit for resale.  You should only handle the item as if you were in a high street store viewing the item as you normally would. it should not be opened or used.

 

Returns Exclusions (Unwanted Goods)

Please contact us by phone +44 (0)114 2437800, or by using the contact form and inform us you wish to return an item(s)*

*These terms do not affect your statutory rights.

Unfortunately we cannot refund or cancel Personalised Orders or Orders Made To The Buyers Specification
Orders containing personalised items or to the buyers specification cannot be cancelled , this includes unlock codes and iPhone unlocks. whereby the buyers IMEI number is considered unique to the order and has no resale value. 
Unlock codes and iPhone unlock services are based on the unique imei number of the customers phone, and are considered as a "made to a consumers specification" order.
These orders cannot be cancelled as they have no resale value.  For example, an unlock code for john's phone would not work on jane's phone, because the 2 phones have different imei numbers. the code would simply fail on all other phones except johns.  We have to order and pay for these codes from our suppliers for the customer once they place their orders online and supply their unique imei number, the codes are no good for anyone else so they cannot be resold to a different customer.

 


 

Faulty Goods - within 30 Days

If your goods are faulty on arrival, you have 30 calendar days from receipt, in which to inform us of the fault in order to claim a full refund or exchange or repair exchange, (please note that for our business customers, different terms of sale apply), after 30 days your return will be processed under the terms of the Manufacturers’ Warranty (See below).

Goods should be returned in their original packaging complete with all accessories and documentation. Once we have verified the fault, we will conduct a repair, or issue a replacement, or full refund to you via your original payment method. We test returned items, and if our technicians find a returned item is not faulty or has been tampered with, we will return the item to you ( In certain circumstances, faults will need to be diagnosed by the manufacturers of the item before a replacement can be issued – i.e. memory card reading faults, item not powering up etc.). In this instance you will be liable for the return carriage.

Goods outside 30 calendar days shall be issued with a replacement or repair only depending on the warranty length of the product.

If a refund is required, Refunds for faulty goods will be issued back to the original payment method.

If your order was only for one item and this item has been returned then the refund cost you paid to receive this order will also be refunded.

If your order contained multiple items and you are not returning all of them, then the cost of shipping your order to you will not be refunded.

Any returns should be marked as "Returned Faulty Item" on the parcel or jiffy bag etc.

If you need to return an item, please notify us first via live chat or the contact page before using the returns form on our Returns Page

 

 

Returns Exclusions (faulty goods)

Unlocking box's and Dongles that are registered by the buyer and  becomes faulty we will offer to replace or repair it depending on the warranty length of the product.

Unfortunately we cannot refund any unlocking box or dongle that has been used to unlock  phone, we contact the manufacturer of the tool returned to check this prior to refunding or cancelling. However if faulty we can offer to replace or repair it depending on the warranty length of the product.

Unfortunately we cannot refund or cancel Personalised Orders or Orders Made To The Buyers Specification
Orders containing personalised items or to the buyers specification cannot be cancelled , this includes unlock codes and iPhone unlocks. whereby the buyers IMEI number is considered unique to the order and has no resale value. 
Unlock codes and iPhone unlock services are based on the unique imei number of the customers phone, and are considered as a "made to a consumers specification" order.
These orders cannot be cancelled as they have no resale value.  For example, an unlock code for john's phone would not work on jane's phone, because the 2 phones have different imei numbers. the code would simply fail on all other phones except johns.  We have to order and pay for these codes from our suppliers for the customer once they place their orders online and supply their unique imei number, the codes are no good for anyone else so they cannot be resold to a different customer.



 




Replacements & Refunds

Where applicable, replacement or alternative items will be processed as promptly as possible, but please be aware that it may take up to 10 working days to issue the item. If an item is out of stock, it will then become a priority back order to be shipped once stock is available.

If you are eligible for a refund, we will refund you back to the payment method you used when you originally paid for your order. Please note: It is your responsibility to notify us of any changes to your card details i.e. you no longer have that account. Refunds can take up to 30 days to process. Refunds by credit card are made to the same credit card that was used for the original purchase*.  Refunds by Paypal will be refunded back to the original Paypal payment account.*

Any return that is not accompanied with the returns form or returns reference number will be held by FoneFunShop for 30 days, awaiting the return of the completed form. Items that have not been reclaimed by you within this period will be disposed of after this time and will result in the return being completed without action.

*These terms do not affect your statutory rights.

 


 

Warranty

Where a product develops a fault, a repair or replacement will be offered, as long as the item is within its manufacture warranty timescale.

Where a product develops a fault outside its manufacture warranty timescale, we will try to help by offering a chargeable repair if possible, or if not possible you would need to purchase the replacement item at the current value.

January 19
RIFF JTAG Manager v1.64 and more
Here is list of latest RIFF Box updates
- RIFF JTAG Manager v1.64
Fixed Password Recovery feature
(Authorization code sending feature was broken, due to wrongly configured timeout)
Fixed bug which caused JTAG Manager crash after clean install and successive downloading of a DLL file while there were no PKG files installed.
Improved login interface - the registered email is automatically filled in to the Login field.
(Remember that You can use both registered user name or e-mail as login. With this feature Your registered e-mail address is automatically inserted in login dialog form, so You just have to type in Your password)
JTAG Manager Main Window Width is increased to increase the width of Resurrector Name fields
August 09
RIFF Box version 2 released
After six successful years since the first RIFF Box hardware was released, were proud to introduce our new v2 RIFF Box hardware. We did our best to develop a reliable, marvelous, yet functional device.
Below you can read the basics about it. Of course, this is preliminary and just a start. RIFF Box v2 hardware is designed so that it can accommodate a large variety of communication protocols, including those of highest importance for starters.

RIFF BOX v2 H/W Specification
Dual-core Cortex-M4 MCU @ 204MHz
PC to Box USB (Device) Speed: Hi-Speed (480 Mbps)
Box to Device (Host) Speed: Full-Speed (48 Mbps)
SD/MMC Interface with 1-Bit (DAT0) and 4-Bit (DAT0-DAT3) Bus Width support and SD_CLK up to 52 MHz
UART Interface
RIFF Smart Probing Feature
Level-adjustable 23 GPIO Lines (1.65V to 3.6V) for interfacing a range of devices and protocols, such as NAND, SPI, I2C, Pin Finder, etc.
4 fixed 3.3V GPIO Lines

RIFF BOX v2 Interface Specification
20-Pin Male Connector:
JTAG Interface: TRST, TDI, TMS, TCK, RTCK, TDO and NRST
SWD (Serial Wire Debug) Interface: SWCLK, SWDIO (SWDIO and SWCLK are overlaid on the TMS and TCK pins)
30-Pin Male Connector:
SD/MMC Interface 1/4Bit @ 52MHz
Level-adjustable 23 GPIO Lines (1.65V to 3.6V)
USB Device Connector: connects the Box with PC @ Hi-Speed (480 Mbps), approx. 20 MByte/sec
USB Host Connector: connects the Box with USB devices @ Full-Speed (48 Mbps), approx. 1.5-2 MByte/sec
RJ-45 Connector:
RIFF Smart Probing Feature
UART Port
4 Fixed 3.3V GPIO Lines

Supported SD/MMD Revisions:
Revisions 1.0 to 1.7 (for MMC: v4.0, v4.1, v4.2, v4.3, v4.41, v4.5, v4.51, v5.0) and higher
Supported JTAG Cores:
ARM7,
ARM920,
ARM926,
ARM946,
ARM7EJS,
ARM11,
CORTEX-A5,
CORTEX-A8,
CORTEX-A9,
CORTEX-A15,
OMAP3430,
OMAP3630,
OMAP4430,
TEGRA2 (CORTEX-A9),
TEGRA2 (ARM7),
QUALCOMM S3 (ARM7, ARM11, SCORPION),
QUALCOMM S4 (ARM7, ARM11, SCORPION),
NOVATHOR,
PXA270,
PXA312
MIPS32 IR5Bit,
MIPS32 IR8Bit,
New hardware and software is fully compatible with Windows 10, which provides effortless installation. Just connect RIFF Box to Windows 10 based PC and everything will be installed automatically. For older Windows versions, there are custom drivers provided with RIFF JTAG Manager installer.
 

 

May 16

RIFF JTAG Manager v1.59 released
Posted on May 16, 2016
JTAG Manager 1.59
—————————
– Changed the RIFFBOX pinout picture (added eMMC pinout interface on RJ-45)
– Fixed bug in Package Editor: Flash Memory/Direct eMMC Flash actions, Automatic Parameters, building list of partitons for write via Plugins, was done with invalid lengths of paritions.
– eMMC/SD Advanced/Select eMMC for Info & Read: Pictograms are added to the list of chips.
The pictogram is blue if info file is present, gray – if not present (the one displayed by the Show eMMC Testpoint button).
– Now its possible to log-in using either registered user name or e-mail address
To download this update, simply click Check for Updates button in Your JTAG Manager software.

 

 

 

 

 

April 12

Riff Box 1.58 - Get Ready For ISP / eMMC Support
Here is JTAG Manager v1.58 with ISP/Direct eMMC support.
To use it, please prepare Your RIFF Box installation folder:
- Rename JTAG Manager v1.56 so You can continue using it if Your account is expired
- Backup Useful plugins folder content because old plugins are incompatible with new Exe, and old exe is incompatible with new plugins.
- Start v1.58 exe and download license (If Your account is not expired)

!!!!!!!!!!  If account expired then you need to buy 30 credits HERE  !!!!!!!!!!
- Update Box firmware to v1.38
- Download new plugins
Old server will be online for some weeks, so users who dont need or cannot acquire new license can get license if they need it.
There will be more info in short time.
JTAG Manager 1.58
---------------------------
- added direct eMMC Access Interface on the RIFFBOX RJ-45 port (check pinout picture for CMD, CLK, DAT0, etc pins positions).
- added eMMC/SD Access page for Read/Write operations on eMMC/SD card via direct interface
- added eMMC/SD Advanced dialog which allows to perform advanced operations with eMMC/SD cards
(reading info, browsing through OCR, CID, CSD (and EXT_CSD for eMMC only) registers fields, edit separate fields and writting back to card, reading/writting eMMC cards MCUs internal firmware, etc)
- added convenient information presentation for specific eMMC chips: pinouts for testpoints, manuals how to use testpoints to resurrect dead eMMC, etc). These INFO files (*.riffinfo) are stored in JTAG Managers Documents folder and can be downloaded via generic <Check for Updates> operation.
- added eMMC Firmware Update option
- added eMMC Firmware Reading option (firmware is stored in *.riffemmcfw format)
For firmware read need to select chip from the list
- *.riffemmcfw eMMC firmware files are now used by RIFF for firmware updates (plain binary files are supported too)
- added elapsed time info for eMMC firmware update stages
- added eMMC Testpoint info displaying (info files must be downloaded from support and are located in the JTAG Managers Documents folder.
- added CMD42 Lock/Unlock functionality for eMMC. User can set/change/remove password to protect/unprotect (lock/unclock) the User Area Partition
- added the User Area Partition Forced Erase to erase Locked User Area Partition and to reset Device lock/unlock state and password (CMD42s consequences)
- added Samsung Factory Erase which erases and re-formats the Samsung eMMC chips.
- fixed bug displaying wrong SD card size for cards capacity less than 2GB
- few small improvements and bug fixes
Firmware 1.38
- added direct eMMC Access Interface functionality
- improved one thing in the emmc communication
- added the CMD42 Lock/Unlock/Pasword reset features
- added Forced erase of locked User Area Partition
- added Samsung eMMC Factory Formwat
- fixed bug for SD card support
- eMMC firmware update feature added
Please visit this topic for more information:
http://www.unlockforum.com/showthread.php/riff-jtag-manager-v1-58-26969.html

 

July 11
RIFF Box Release New Update
RIFF Box Release New Update and Support More Models:
HTC One Dual Sim 802e (PN0771000) Now Supported Repair Bootloader/CID-Wlan/Recovery/Kernel/HTC Security/
HTC One Dual Sim 802w (PN0771000) Now Supported Repair Bootloader/CID-Wlan/Recovery/Kernel/HTC Security/
HTC One Dual Sim 802d (PN0751000) Now Supported Repair Bootloader/CID-Wlan/Recovery/Kernel/HTC Security/
HTC One Max (OP3P52000) Now Supported Repair Bootloader/CID-Wlan/Recovery/Kernel/HTC Security/
Sony_Xperia_T_LT30p Now Supported Repair Bootloader/Recovery-Kernel

 

 

July 03
RIFF Box Release New Update
3.7.2015 Released New Update For RIFF Box :
1-HTC One M7_U PN07120000 Safe Repair
2-HTC One M7_U PN07140000 Safe Repair
Samsung SGH-I9515 Value Edition
Samsung SGH-I337 Supported 4.4.2/4.4.4/5.0.1
Sony Xperia J ST-26i Repair Booltoader/Recovery

 

 

May 12
RIFF Box New Repair Pack
New Repair Pack Release For RIFF BOX
HTC One Mini
Huawei Y210D
Samsung I9204 Ver 4.4.2 Now Supported
Samsung I8552 Galaxy Win Latest Bootloader Now Supported
 

 

February 03
RIFF Box New Repair Pack
Samsung:
SGH-T999v Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem With Support 4.3 and 4.42 Version
SGH-I747U Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem With Support 4.3 Version
SM-G730W8 Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem With Support 4.2.2 and 4.4.2 Version
Test Released Version For :
SGH-S5302 Galaxy Pocket Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem
SGH-S5303 Galaxy Pocket Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem
 

 

December 10
RIFF Box New Repair Pack Released
Sony:
C6603 Xperia Z Now Supported With Version 4.4.4 Repair Boot/Bricked Phone(First in The World)
C6603/C6602 Xperia Z Now Supported For Repair Imei null/Baseband Unknown only if have SW Problem(First in The World)
HTC:
Sensation XE PG5813001 now Supported Both MID 0x105310E1 & 0x104210E1 Repair Boot/Bricked/Recovery/Kernel/CID/Wlan
Ruby/Amaze PH8510000/PH8511000 Now Supported Safe Repair Without Damaged SimLock/IMSI With 4 Different Hboot ENG ,Repair Boot/Brciked/Recovery/Kernel/CID/Wlan (First in The World)
Samsung :
GT-I9190 Galaxy S4 Mini Now Supported For Repair Boot/Bricked/EFS/Modem Version XXUBNA1 / UBUBNA3 / UBUBNB1 / UBUBND1
Samsung:
GT-I9205 Galaxy Mega LTE Latest 4.4.2 Now Supported With RIFF Box For Repair Boot/Bricked/EFS/Modem/ROM2
Sony:
Xperia E C1605 Now Supported With RIFF Box For Repair Boot/Recovery/Kernel
Updated Old Package :
Nokia X Rm-1030 Added JTAG Photo
Smasung P3100 Minor Bug Fixed


December 06
RIFF Box New Repair Pack
Hi
New Repair Pack Created By Babak Nuri:
HTC:
Desire X Dual Sim T329w With MID PM661000 Now Supported Hboot "1.12.000.2 and 1.15.000.2Repair Recovery/Kernel/CID/Wlan"
One XL evita_utl Arabic Product With MID PJ835000 Now Supported Hboot "2.10.0000 Repair Recovery/Kernel/CID/Wlan"
Vigor/Rezound With MID PH9810000 Now Supported Both Hboot GB/ICS 2.11.0000 2.27.0000 Repair Recovery/Kernel/CID/Wlan
Nokia:
RM-980 V1 Nokia X Now Supported By RIFF Box For Repair Boot/Bricked Phone
RM-980 V2 Nokia X Now Supported By RIFF Box For Repair Boot/Bricked Phone
Rm1030 V1 Nokia Xl Now Supported By RIFF Box For Repair Boot/Bricked Phone(This is Beta)
Samsung :
GT-I9200 Galaxy Mega Now Supported latest 4.4.2 Version
GT-P3100 Galaxy Tab2 Now Supported 16GB eMMC


June 16
RIFF JTAG Updates (30 new packs)
Hi,
Here are some latest released updates for RIFF Box:
Usual RIFF DLL-s :
Samsung i847
Samsung S7390
Nokia Lumia 625
Samsung i547
HTC HTL22
Gygabite Rio R1
Gygabite G1342
Qualcomm MDM8200 NAND
ZTE T40
Custom PKG-s
Motorola MB886 riffpkg (Updated with pinout and more zones)
HTC One Max riffpkg.
Samsung i9192 MK4 Total Repair (Use it to repair baseband)
HTC One SV PL801000 by Babak Nuri, (Upated, check bellow)
Samsung S6310N Total Repair
HTC 8S PM5910001 Total Repair
Samsung S6310 Total Repair
Samsung S6312 Total Repair (By Progman)
HTC Merge (HTC Lexicon)
Casio G'Zone CA201L
Sony XPeria T (LT30A)
Brava Vega 3
Sony (SE) Xperia Z C6602 by Babak Nuri
HTC OneSV PL80110
Samsung S5283
Andromax U i6c Read/Write PKG
LG SU640
HTC OneM7 U PN071200
Qualcomm MSM8625 eMMC /Generic/
RIFF JTAG Manager v1.56 is required to use these updates.


December 14
RIFF JTAG - Easy repair updates (15 DLL-s)
New models:
Samsung SGH-T699 Galaxy S Relay 4G / Blaze Q
Orange Nivo 7560U
Huawei Ascend Y300-0100 U8833 (Huawei Asura)
Huawei UML397 4G LTE™ Wireless Modem
HTC Desire 500 506e (HTC Z4)
HTC Desire 600 (HTC CP3)
HTC Butterfly S 901s 4G LTE
Bug Fixes/Version updates:
HTC_8X_PM2320000.dll
- Resurrection data is updated and improved
Micromax_A87.dll
- New ID: 0x106220E1 is added to allowed list
Pantech_A860S.dll
- Fixed resurrection bug
Samsung_I337M.dll
- Added resurrection data from a new firmware
- Added firmware version selection option for more flexible and user-friendly resurrection
- Added resurrection data from a new firmware (VLUAMG1)
- Added resurrection data from a new firmware (VLUEMK6)
Samsung_I535.dll
- Added 32GB eMMC (29.12GB) chip resurrection data
Samsung_I747.dll
- Added resurrection data from a new firmware
- Added firmware version selection option for more flexible and user-friendly resurrection
- Added resurrection data from a new firmware (UCUEMJB)
Samsung_I9192.dll
- New ID: 0x308A30E1 is added to allowed list

November 10
RIFF JTAG - How to repair Samsung baseband and IMEI
This is Step By Step Guide For Repair "Null Imei" "Unknown BaseBand" "Low Signal" And All Related To EFS.....Model By Model...!!!
Supported Model List:
1-I897
2-I9000
3-I9003
4-I9070 And I9070_Modem_FS
5-I9010_Giorgio
6-I9100
7-I9100G
8-N7000
9-N7100
10-P1000
11-P6200
12-P6800
13-SPH-P100 Galaxy Tab Sprint
14-SCH-I800_Verizon
15-I9100G
16-SHW-M110s
17-N7100_Odin
18-N7100_Riff
19-I997R_Infuse_Rogers_EFS
Added New EFS File With Have All Needed *.Bin File related to "Modem/Radio" and "EFS"
With This File We Can Repair Completly :
1-Null/Null Imei
2-Unknown BaseBand
3-BaseBand XXXXXXX
4-Not Registered Network(some models only)
SGH-I717
SGH-I727
SGH-I747M
SGH-I957
SGH-I957D
GT-I8150
GT-I8160
GT-I8160P
GT-I8190N
GT-I9001
GT-I9070
GT-I9105
GT-I9105P
GT-I9190
GT-I9192
GT-I9210
GT-I9500
GT-I9505
SHW-M190S
SHW-M250S
GT-N7105
GT-N8000
GT-P3100
GT-P3113
GT-P5100
GT-P5110
GT-P7320
GT-S5303
GT-S6310
GT-S6310N
GT-S6500
GT-S6500D
GT-S7500
GT-S7500L
GT-S7500T
GT-S7562
GT-S8600
SCH-I535
SCH-I535V
T879
All 40 new models can download from torrent:http://tracker.riffbox.org/details.php?id=98
How To Write:
Quote:
1-Open 'eMMC Plugin"
2-Press "Load Layout From Device"
3-Find and Double Click Desired Partitions
4-Right Click One By One and Injekt *.Bin file
5-Press "Write Selected"
6-Reflash Phone With Latest Officially Firmware
Enjoy


October 05
newest developments from RIFF JTAG
New models:
Easy repair HTC One 802d supported
Easy repair Huawei Ascend W1-U00 supported
Easy repair LG E988 Optimus G Pro 5.5 4G LTE supported
Easy repair LG LU6200 Optimus LT supported
Easy repair LG P715 Optimus L7 II Dual supported
Easy repair LG VS840 Lucid 4G (LG Cayman) supported
Easy repair Pantech Vega Iron IM-A870L supported
Asus Padfone 2 A68 Unbrick ? dead boot repair supported
Asus Padfone Infinity A80 Unbrick ? dead boot repair supported
LG E975W Optimus GJ (LG Gee B) Unbrick ? dead boot repair supported
HTC T329w (HTC Proto) Unbrick ? SuperCID ? IMEI repair supported
Samsung Galaxy Ace Duos I589 Unbrick ? dead boot repair supported
Samsung 4G LTE Mobile Hotspot SCH-LC11 Unbrick supported
New JTAG Manager:
JTAG Manager v1.54 released ? Easy password recovery supported

August 10
RIFF JTAG -Latest Updates
RIFF Box Best JTAG Box in this Galaxy
16 new models today :
Samsung GT-S7572 Galaxy Trend Duos II
Samsung GT-N7005 Galaxy Note LTE
Samsung GT-i9205 Galaxy Mega 6.3 LTE 8GB
Samsung GT-i9158 Galaxy Mega 5.8
Samsung GT-i9152 Galaxy Mega 5.8
Samsung GT-i8552 Galaxy Win Duos / Galaxy Grand Quattro
Verizon Samsung SCH-i545 Galaxy S4 (Samsung Altius)
Samsung SGH-i337M Galaxy S 4 LTE 32GB (Samsung Altius)
Pantech Vega No6 IM-A860S
Pantech Vega LTE M IM-A810S SKY
Pantech Vega IM-A650S
LG F260S Optimus LTE III
LG E975 Optimus G (LG Gee)
LG E960 Nexus 4 (LG Mako)
LG E970 Optimus G (LG Gee)
Huawei Ascend G510
Bug fixes:
HTC Titan - DCC loader bug fix
Samsung i9505 - Added Total Repair option
Samsung i337 - Added Total Repair option
Samsung l720 - Added Total Repair option
Samsung m919 - Added Total Repair option
To use these new updates, You need RIFF JTAG Manager v1.50 and RIFF Box Firmware v1.36.

August 03
RIFF BOX JTAG Manager v1.50 released
---Firmware update procedure is simplified now. To update box firmware
user now has to click single button, no other actions are required!!!
(in previous versions update firmware opration caused many questions from unexperienced users).
--- Update server moved to new host. Thus, Check Updates for Updates button will now work correctly.
--- Numlock key recognition is added so now additional keypad can be used
to enter digits 0..9 into decimal fields (like address/length fields)

May 27
RIFF JTAG - Some news for today
Hi,
We've done few models last weekend, so here is list:
Samsung Gt-S5380k Wave Y
Samsung GT-i9082 Galaxy Grand Duos (Samsung Baffin)
Samsung GT-i9105 Galaxy S II Plus
HTC J ISW13HT (HTC Valente)
HTC Desire SV T326e (HTC Magni)

April 26
RIFF JTAG - Week updates summary
RIFF JTAG Manager v1.49
Added support for Cortex-A15 and Cortex-A5 cores.
New Popup balloon is added with hints about ‘Dead Body ID is wrong’ error.
Added Windows 8 support.
Added “RIFFBOX on the Network” button (BOX Service Page).
User can easily visit some main RIFFBOX’s internet locations.
Some new IDCODES added to the search engine (CTRL+F)
RIFF Box Firmware v1.35
Added support for Cortex-A15 and Cortex-A5 cores.
Fixed emergency script issue for multi-cored Cortex MCUs: it was executed after first core was halted.
Now it is executed after all core(s) (if specified by reset strategy) are processed (halted).
RIFF Torrent tracker updates:
HTC Phones flash dumps:
HTC One X
HTC Salsa
HTC MyTouch 4G Slide
HTC One S4
HTC One S3
HTC Rhyme
HTC Wildfire S
HTC Desire C
HTC Desire V
HTC Amaze
Samsung Phones flash dumps:
Samsung M190S
Samsung M200K
Samsung S7500T
Samsung S7562
Samsung S7500D
Samsung i747M
Samsung S5839I
Samsung SC-06D
Samsung N7000
Samsung i9100
Samsung P1010
Samsung S5380D
Samsung E160K
Samsung E160L
Samsung S7500L
Samsung S6802
Samsung S6102
Samsung S5302
Samsung i997R
RIFF Full setup:
New JTAG Manager - v1.49
New RIFF Box Firmware - v1.35
All resurrector files
Phones wanted for beta tests:
HTC Desire SV
HTC Desire CV
HTC Salsa
LG E970
LG E690
LG E975
LG F240
LG VS920
Oppoy X907
Of course, we will try to help our users with ANY phone with supported CPU.

April 20
RIFF JTAG - Week updates summary
So here's the news:
New models:
RIFF JTAG ? HTC Windows Phone 8S (HTC Rio) Unbrick, Unlock, IMEI, SuperCID repair supported | RIFF Box - JTAG Revolution
RIFF JTAG ? HTC Windows Phone 8X LTE 16GB Unbrick, Unlock, IMEI, SuperCID repair supported | RIFF Box - JTAG Revolution
RIFF JTAG ? HTC EVO 3D CDMA Unbrick, Unlock, IMEI, SuperCID repair supported | RIFF Box - JTAG Revolution
RIFF JTAG ? T-Mobile myTouch 4G Slide (HTC Doubleshot) Unbrick, Unlock, IMEI, SuperCID repair supported | RIFF Box - JTAG Revolution
RIFF JTAG ? HTC Titan X310E (HTC Eternity) Unbrick, Unlock, IMEI and SuperCID repair supported | RIFF Box - JTAG Revolution
RIFF JTAG ? Samsung GT-S7500T Galaxy Ace Plus Unbrick ? Dead boot repair supported | RIFF Box - JTAG Revolution
RIFF JTAG ? Samsung SCH-R530 Galaxy S III LTE Unbrick ? Dead boot repair supported | RIFF Box - JTAG Revolution
RIFF JTAG ? Samsung S5750e Wave575 Unbrick ? Dead boot repair supported | RIFF Box - JTAG Revolution

March 29
RIFF JTAG - Week updates summary
Hello, this is what we've done:
New Models:
RIFF JTAG - HTC Windows Phone 8X (HTC Accord) Unbrick, Dead boot IMEI repair supported | RIFF Box - JTAG Revolution
RIFF JTAG - NTT DoCoMo Samsung Galaxy S III LTE SC-06D Unbrick - Dead boot repair supported | RIFF Box - JTAG Revolution
HTC EVO Design 4G PH4430(HTC Kingdom) Unbrick, Unlock, IMEI, SuperCID repair supported | RIFF Box - JTAG Revolution
RIFF JTAG - LG E405 Optimus L3 Dual Unbrick ? Dead boot repair supported | RIFF Box - JTAG Revolution
RIFF JTAG - LG E615 Optimus L5 Dual Unbrick - Dead boot repair supported | RIFF Box - JTAG Revolution
RIFF JTAG - Samsung GT-i8190 Galaxy S III Mini Unbrick - Dead boot repair supported | RIFF Box - JTAG Revolution
RIFF JTAG - Samsung SHW-M200K NEXUS S Unbrick - Dead boot repair supported | RIFF Box - JTAG Revolution
RIFF JTAG - Pantech Vega R3 IM-A850S Unbrick - Dead boot repair supported | RIFF Box - JTAG Revolution
RIFF JTAG - ZTE Skate Unbrick ? Dead boot repair supported | RIFF Box - JTAG Revolution

March 09
RIFF Box updates summary
Here is what we've done this time:
New models:
RIFF JTAG – HTC EVO Design 4G / Acquire (HTC Kingdom) Unbrick, IMEI, SuperCID, Unlock repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – HTC Jetstream (HTC Puccini) Unbrick, IMEI, SuperCid, Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – HTC Vivid (HTC Holiday) Unbrick, IMEI, SuperCID repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Huawei U1270 Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S6312 Galaxy Young Duos Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – ZTE V889D Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung Exynos 4412 QUADCORE Supported « RIFF Box – JTAG Revolution
RIFF JTAG – LG Optimus LTE Tag F120L Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – LG Optimus LTE Tag F120K Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Pantech Vega Racer IM-A770K Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Pantech Vega LTE M IM-A810S SKYG – Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
Bug fixes/updates :
Samsung_S7562.dll
-------------------------------------
- resurrection data updated

February 23
RIFF JTAG - Week Updates Summary
So, this is what we've done this week:
New Models:
RIFF JTAG – Vodafone 858 Smart (Huawei U8160) Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – LG P930 Nitro HD Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Pantech Vega R3 IM-A850L Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Pantech Vega R3 IM-A850K Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-P3113 Galaxy Tab 2 7.0 Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-P3110 Galaxy Tab 2 7.0 Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-P3100 Galaxy Tab 2 7.0 Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S6500D Galaxy Mini 2 (Samsung Jena) Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – HTC Amaze4G PH8510000 (HTC Ruby) Unbrick, Unlock, SuperCID, IMEI repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – HTC Desire C NFC A320e (HTC Golf) Unbrick, Unlock, SuperCID, IMEI repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – LG F100S Optimus Vu Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – LG LS970 Eclipse 4G LTE Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
Bug Fixes/DLL updates:
HTC_DesireV_PL1110000.dll
-------------------------------------
- fixed WLAN partition leak (with WLAN checked resurrection would not start). Now is ok
- fixed HTC partition leak.
Samsung_N7000_AP.dll
-------------------------------------
- resurrection data for 14.68GB eMMC versions is updated
HTC_Amaze4G_PH8511000.dll
-------------------------------------
- added CID change and IMEI repair options
HTC_OneXL_PJ8312000.dll
-------------------------------------
- fixed WLAN partition leak (with WLAN checked resurrection would not start). Now is ok
HTC_Jewel_PJ7510000.dll, HTC_OneX_PJ8310000.dll
-------------------------------------
- fixed WLAN partition leak (with WLAN checked resurrection would not start). Now is ok

 
February 15
RIFF JTAG - Week updates summary
Here's what we've done this week:
New Models:
RIFF JTAG – HTC Desire X (HTC Proto) Unbrick , Unlock, SuperCID and IMEI repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SHW-M240S Galaxy Ace Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SHW-M190S GALAXY S Hoppin Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – CDMA Samsung SCH-M569 Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – LG SU630 Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S5301 Galaxy Pocket Plus Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
Bug fixes/DLL Updates:
Huawei_C2856.dll
-------------------------------------
- fixed MCU bug.
Samsung_E120S.dll
-------------------------------------
- ID 0x106A10E1 is added to allowed list
eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v2.03
-------------------------------------
- fixed bug in displaying wrong ad******* if address value exceeds 32-bit range


February 09
RIFF JTAG - Week updates summary
Here's what we've done this week:
New models:
RIFF JTAG – Alcatel One Touch OT-995 Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – HTC One XL (HTC Evita) Unbrick – Dead boot, Unlock, SuperCID, IMEI repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – ZTE Skate Acqua (V880) Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S6810P Galaxy Fame WORLD FIRST Boot repair support ! ! ! « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung YP-G1CW / YP-G1CB Galaxy S WiFi Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
Existing DLL-s Bug Fixes/Updates:
Samsung_I9020A.dll, Samsung_I9020T.dll, Samsung_M200S.dll
-------------------------------------
- added internal eMMC support: it's detected as ROM2/ROM3 memories.
Samsung_P1000.dll
-------------------------------------
- "Samsung Galaxy Tab" is renamed to "Samsung P1000"
- added internal eMMC support: it's detected as ROM2/ROM3 memories.


January 26
RIFF JTAG - Weekly Updates Summary
Whats new:
Samsung P5100
Samsung P5110
Samsung P5113
Samsung S7562
LG E900 Optimus 7
Huawei U8220
Nokia Lumia 610
Nokia MCU MSM7227A BootRom is also available for those who are interested.

December 29
RIFF JTAG - Updates Summary
New Models:
RIFF JTAG – Samsung SGH-T879 Galaxy Note Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S7562i Galaxy S Duos Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S7530 Omnia M Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S6012 Galaxy Music Duos Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SCH-i535 Galaxy S3 Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SHW-M200s Nexus S Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SHW-M180W Galaxy Tab WiFi Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – HTC One S PJ401000 Unbrick, Unlock, IMEI, SuperCID repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – AT&T HTC Status (HTC ChaCha PH0613000) Ubrick, Boot, IMEI, SuperCID repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Haier C2010 Ubrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – ZTE F160 Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
Bug Fixes - DLL Updates:
HTC_ChaCha_PH0611000.dll
-------------------------------------
- fixed bug for 4KB NAND models - it was resurrecting boot zones no matter whether boot zones resurrect was checked or not in the resurrection settings;
- fixed HTC partition size for 4KB NAND models;
Samsung_P7320.dll
-------------------------------------
- fixed H/W Init
HTC_OneS_PJ4020000.dll
-------------------------------------
- unlock added.
HTC_Jewel_PJ7510000.dll
-------------------------------------
- fixed WLAN partition leak (with WLAN checked resurrection would not start). Now is ok
HTC_EvoView4G_PG41200.dll
-------------------------------------
- adjusted H/W init so it wont give RAM memory test failed error on h/w ok devices
HTC_DesireZ.dll, HTC_DesireS.dll, HTC_DesireHD.dll, HTC_DesireHD_26V.dll
-------------------------------------
- adjusted H/W init so it wont give RAM memory test failed error on h/w ok devices

November 30
RIFF JTAG - Week updates summary
New models:
RIFF JTAG – Pantech SKY VEGA S5 A840S Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SCH-i509 Galaxy Y Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SC-05D Galaxy Note LTE Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-N8010 Galaxy Note 10.1 WiFi Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – HTC HD Mini T5555 (HTC Photon) Unbrick, Unlock, IMEI, CID repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Huawei U8800 Pro Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SCH-i559 Galaxy Mini / Galaxy Pop Unbrick – Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SPH-L710 Galaxy S III LTE Unbrick – Dead Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – HTC Sensation PG5811000 Unbrick, Unlock, IMEI, CID repair supported « RIFF Box – JTAG Revolution

November 23
RIFF JTAG - Week Updates summary
Here is what we have done this week:
Todays new Releases
RIFF JTAG – eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v2.00 « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SGH-Z710 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
HTC_Explorer_PJ0312000.dll
Bug fixes/DLL Updates:
HTC_OneS_PJ4020000.dll
-Fixed IMEI and CID repair
Samsung_I747M.dll
- ID 0x706B50E1 is added to allowed list
Huawei_E5832.dll
- ID 0x901B10E1 is added to allowed list
HTC_Explorer_PJ0310000.dll
- Fixed simple bug for 2KB NAND resurrection

November 20
RIFF JTAG - Todays updates
Here is whats new today:
New Models:
RIFF JTAG – Huawei Boulder U8350/U8350-51 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung Gravity 3 SGH-T479 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – HTC Amaze 4G (HTC Ruby) Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Huawei Sonic (Huawei U8650) Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Huawei Ascend G330 (Huawei U8825D) Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Huawei Ascend G300 (Huawei U8815) Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution

November 16
RIFF JTAG - Week Updates Summary
Here is what we have done this week:
New Models:
RIFF JTAG – HTC EVO 4G LTE (HTC Jewel) Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Cincinnati Bell Huawei U8500 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Huawei U2800 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Huawei Ideos U8150/U8150D Unbrick – Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Huawei Ascend Y200 (Huawei U8655) Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Pantech Vega Racer 2 LTE IM-A830L Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-i8530 Galaxy Beam Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – LG E610/E612 Optimus L5 Unbrick -Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-i8350 Omnia W Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-P7320 Galaxy Tab 8.9 LTE Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Huawei U8800 Impulse 4G/ X5 Unbrick – Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – HTC Wildfire S CDMA (HTC Marvel C) Unbrick – Dead Boot Repair and full Support « RIFF Box – JTAG Revolution
Bug Fixes/DLL Updates:
Samsung_P6800.dll
HTC_ChaCha_PH0611000.dll
New JTAG Manager:
RIFF JTAG Manager v1.46

November 09
RIFF JTAG – LG F-160S Optimus LTE2 Unbrick – Dead Boot Repair Supported

RIFF JTAG – LG F-160L Optimus LTE2 Unbrick – Dead Boot Repair Supported

RIFF JTAG – LG F-160K Optimus LTE2 Unbrick – Dead Boot Repair Supported

RIFF JTAG – Pantech Sky Vega LTE EX IM-A820L Ubrick – Dead Boot Repair Supported

RIFF JTAG – Pantech Sky Vega LTE IM-A800s Unbrick – Dead Boot Repair Supported

RIFF JTAG – Pantech SKY Vega RACER IM-A760S Unbrick – Dead Boot Repair Supported

RIFF JTAG – Pantech Sky Vega T100K Unbrick – Dead Boot Repair Supported

RIFF JTAG – LG C660 Optimus Pro Unbrick – Dead Boot Repair Supported

RIFF JTAG – HTC Flyer 4G P515E Unbrick, IMEI, SuperCID, ModelID repair supported

October 19
RIFF JTAG - Week updates summary
So what we have done this week ?
New Models:
RIFF JTAG – Samsung GT-S5830L Galaxy Ace Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S5300 Galaxy Pocket Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – LG P970 Optimus Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-i9070 Galaxy S Advance Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-i8160 Galaxy Ace 2 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – LG P705 Optimus L7 / P700 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – LG P698 Optimus Link Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung Wave Y GT-S5380D Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – T-Mobile myTouch2 3G Slide (HTC Espresso) Unbrick /Unlock/ Repair Boot, IMEI, CID supported « RIFF Box – JTAG Revolution
New RIFF Software:
RIFF JTAG Manager v1.45
RIFF Box firmware v1.34
- ST-Ericsson NovaThor U8500 MCU support is added;
- Updates List is now displayed in alphabetic order (Check Updates button on the Box Service page);
- Small cosmetic change to CTRL+F find form: CTRL+V/CTRL+X operations on ID search field starts search immediately;
- Added Override Embedded Reset Strategy feature: is usefull in rare cases when there are some problems with target
coming out of reset, etc. The feature is accessible via Advanced Settings button on the Box Service page;
- Added Apply NRST before connecting to target (to setup click Advanced Settings button on the Box Service page);
This feature is handy for development purposes especially when working with Qualcomm MCUs - after erroneous H/W config
(most often is 0x45 error code) MSM locks down, to reconnect need to reset power. Enabling this feature simplifies this.
Firmware 1.34
---------------------------
- ST-Ericsson NovaThor U8500 MCU support is added

October 12
RIFF JTAG - Week Updates Summary
So, whats new for this week ?
New models:
RIFF JTAG – Samsung SGH-L760 Unbrick – Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SCH-E329I Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – CoolPad 5860 + Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung Galaxy K SHW-M130K Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S5830G Galaxy Ace Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S6500 Galaxy Mini 2 (Samsung Jena) Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
Useful Plugins:
PIT-partitioned eMMC-based Samsungs FullFlash Image Files Processing Plugin v1.00
(Galaxy S2, Galaxy S3 models (i9100, i9100G, N7000, I747, I747M, T999, T999v etc)
With this plugin You can easy handle EFS partitions in order to repair baseband problems.
eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v1.02
-------------------------------------
- Added some Samsung partitions names to the list (based on Samsung phones with new MSM7xxxxA chips).


October 05
RIFF JTAG - Week Updates summary
So, we worked hard this week, and these are the results:
New Models:
RIFF JTAG – HTC ChaCha A810e Unbrick, IMEI, SuperCID and Simlock repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-B7510 Galaxy Pro Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-B5510 Galaxy Y Pro / Galaxy Txt Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-B5620 OmniaPRO 5 / GT-B6520 Omnia 652 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S7250D Wave M Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SGH-P960 Unbrick – Dead Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SGH-i747M Galaxy S III LTE Unbrick – Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SGH-T999V Galaxy S 3 Unbrick – Boot Repair Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SGH-iT999 Galaxy S 3 Unbrick – Dead Boot Repair supported « RIFF Box – JTAG Revolution


September 14
RIFF JTAG - Updates summary
RIFF JTAG current week updates summary:
Whats new:
RIFF JTAG -Huawei Ideos X1 U8180 (Huawei Gaga) Unbrick – Dead Boot repair « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S7500L Galaxy Ace Plus Unbrick – Dead Boot repair « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung GT-S6102 Galaxy Y Duos Unbrick – Dead Boot repair « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SHV-E120L Galaxy S II HD Unbrick – Dead boot repair « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SHV-E160L Galaxy Note LTE Unbrick – Boot repair « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung SGH-A887 Unbrick – Dead boot repair « RIFF Box – JTAG Revolution

September 12
RIFF JTAG – Samsung SHV-E160L Galaxy Note LTE Unbrick – Boot repair

September 12
RIFF JTAG – Samsung SHV-E120L Galaxy S II HD Unbrick – Dead boot repair

July 20
RIFF JTAG -Samsung Galaxy S3 (SGH-i747) Support and more
Samsung SGH-i747 Galaxy S III LTE Unbrick / Boot repair supported, World First ! ! !
RIFF JTAG Manager v1.44 released (Added SnapDragon S4 MCU support)
RIFF Box Firmware v1.33 released ( Read more )
QUALCOMM ESC6xxx Generic DLL released (Used in Motorola EX130, EX132)
QUALCOMM MSM7225A Generic DLL released (Used in HTC Pico, HTC Desire C, Samsung B5510 and more)

June 15
RIFF JTAG - CDMA Updates – 4 new ZTE models
ZTE S170 support added
ZTE S180 support added
ZTE S165 support added
ZTE FWPC26 support added
Bug fixes:
HTC_Flyer_PG41100.dll
HTC_Flyer_PG41400.dll
PLL frequency is lowered, now no more RAM memory test failed bug error at the connection stage.

June 12
RIFF JTAG - HTC Radar, HTC Rhyme via USB Supported

May 31
RIFF JTAG - HTC One V Unbrick/Unlock/IMEI Repair, Samsung E160K Support

May 23
RIFF JTAG – HTC 7 Surround T8788 Unbrick, Unlock, SuperCID and IMEI repair supported

May 18
RIFF JTAG - Weekend Updates
Samsung B7320 unbrick/boot repair support added
HTC Sensation 4G (PG581000) Unbrick, Unlock, S-Off, SuperCID support added
HTC Sensation (PG581300/PG583101) Unlock support added
HTC Evo 3D Unlock support added
Bug Fix updates:
HTC Desire HD Support for new board revisions with hboot 2.xx (No Network problem)
HTC Wildfire S Proximity sensor fix

May 05
RIFF JTAG – Samsung SGH-T679 Exhibit II 4G (Samsung Ancora) Unbrick – Dead Boot repair supported

April 27
RIFF JTAG - HTC via USB cable 5 more models supported
HTC Thunderbolt USB support added
HTC Sensation XL USB support added
HTC Inspire USB support added
HTC Incredible S USB support added
HTC Incredible 2 USB support added
These new updates will allow You to use USB cable to perform any operation on listed models. Remember that this work if Your phone is enumerated on USB port as QHUSB_Dload or Qualcomm HS-USB QDLoader device.
In case phone is not enumerated, You might need to use test point method first.
Please visit RIFF FAQ section in to see how to install drivers, and how to find eMMC Vdd test points

April 24
RIFF JTAG - HTC via USB cable supported
Released support for HTC phones based on MSM8x55 CPU, which are enumerated on USB port as “QHUSB_DLOAD” device. Now it’s possible to repair these phones without soldering any wires. Even without opening !

Following models are supported at the moment:
HTC Desire HD (HTC Ace)
HTC Desire S (HTC Saga)
HTC Desire Z (HTC Vision)
HTC Flyer 3G
HTC Flyer WiFi
HTC Evo View 4G
It is possible to force QHUSB_DLOAD mode by disabling Vdd line on eMMC chip. Check Desire S TP info for example. This means, You can work with any MSM8255/MSM8655 based HTC phone, as long as You force it into QHUSB_DLOAD mode.
Follow this procedure if You want to use these updates:

Connect Your phone to USB port and install QHUSB_DLOAD device driver (C:\Program Files (x86)\RIFF Box JTAG Manager\Drivers\32Bit\QDLOADER)
Launch JTAG Manager, select appropriate Model DLL and click desired button
Install “RIFF Box DCCLoader USB Interface” port driver (C:\Users\Admin\Desktop\Drivers_64Bit_WorkedForMe\ Drivers\64Bit\DCCLDR)
If required, repeat the procedure (sometimes required if device is connected for first time)
We will release USB support for rest of the models on these CPU-s in following days.
To download and install new updates – simply click “Check for Updates” button on Box Service TAB.


April 06
RIFF JTAG - HTC Flyer, Routers, Sat Receivers
Whats new:
RIFF JTAG Manager v1.42
RIFF Box Firmware v1.32
Network Router support:

LinkSys WRT54G Unbrick, Read/Write Flash
Satellite Receivers (STB-s):

Orton 4100C Unbrick, Read/Write Flash
EuroSky ES-4100 Unbrick, Read/Write Flash
HTC Phones support:

HTC Flyer Boot repair, Unlock, CID, ModelID, S-Off, IMEI Update
HTC Phones bug fix and updates:

HTC Sensation (HTC Pyramid) S-Off support added
HTC Evo 3D (HTC Shooter) S-Off support added
HTC Desire HD DBL reflash support added

HTC Desire Z DBL reflash support added
RIFF Torrent Tracker updates:

06.04.2012 HTC_Working_Full_flash_Backups_06.04.2012_v2.torre nt
New HTC Full Backups torrent is uploaded and ready for seeding.

New files for following models: HTC 7 Pro (tested with hspl)
HTC Evo 3D (for Liteon camera)
HTC Desire HD (hboot 2.00 with fix for network problem)
HTC Sensation
HTC Kaiser
HTC Surround
HTC Incredible S

April 03
RIFF JTAG – Samsung GT-S5830i,Samsung Galaxy Mini – GT-S5570iBoot repair supported


April 03
RIFF JTAG – HTC 7 Pro (HTC Gold) Unbrick, Unlock, IMEI and CID repair supported

March 31
RIFF JTAG – Samsung SCH-i920 Omnia, Samsung SHV-E120S Galaxy Dead Boot Repair support

March 28
RIFF JTAG – Samsung SCH-I500 Galaxy S Mesmerize/Fascinate Unbrick Supported

March 24
RIFF JTAG – LG E510 Optimus Hub (LG Univa) Supported

March 21
RIFF JTAG - Samsung P6810, HTC Sensation XL Supported and more !
Whats new:
Added WORLD FIRST Samsung GT-P6810 Galaxy Tab 7.7 WiFi 16GB
Added WORLD FIRST HTC Sensation XL X315 / Bass (HTC Runnymede)
Bug fixes:
Samsung Galaxy i9003 (3 new DLL, with adjusted I/O voltage levels)
SonyEricsson E15i (ROM not supported bug fixed)

March 20
RIFF JTAG – HTC EVO View 4G Unbrick, Unlock, IMEI and CID update supported

March 16
RIFF JTAG - Samsung GT-i9210 Galaxy S II LTE Unbrick - Dead Boot repair and more
Samsung GT-i9210 Galaxy S II LTE Unbrick - Dead Boot Repair
QUALCOMM Partition Tool v1.06
Galaxy Partition tool v1.04
Bug fix updates:
HTC Sensation (PG85130)
HTC Evo 3D (HTC Shooter)

March 14
RIFF JTAG - HTC Sensation, EVO 3D, Samsung T989, i727, and more !
RIFF JTAG Manager v1.41
RIFF Box firmware v1.31
RIFF JTAG Direct JTAG Access plugin 1.03
Unbrick Samsung SGH-i727 Galaxy S II Skyrocket World First !
Unbrick Samsung SGH-T989 Galaxy S II World First !
Unbrick HTC Sensation (HTC Pyramid) World First !
Unbrick HTC Shooter (HTC EVO 3D) World First !

March 13
RIFF JTAG - SonyEricsson new BOOTROM support and more !
Whats new:
Unlock/Repair TA is now supported for new BOOTROM version in following models:
E15a (SE_E15a.dll),
E15i (SE_X8.dll),
U20a (SE_U20a.dll),
U20i (SE_U20i.dll),
E10i (SE_X10_Mini.dll)
HTC Neon Unbrick – Boot Repair, IMEI and CID update supported.

March 06
RIFF JTAG – Samsung SGH-T499 Dart (Samsung Tass) Unbrick – Boot Repair supported

March 02
RIFF JTAG - More CDMA models + Samsung S5360 supported
Added full repair support for following phone models:
Samsung GT-S5360 Galaxy Y
Samsung B219 (CDMA)
Samsung S189 (CDMA)
Alcatel OT255C (CDMA)


February 29
RIFF JTAG - JTAG Manager v1.40, Samsung Wave 3 GT-S8600 Unbrick Supported

February 28
RIFF JTAG - Samsung GT-S7500 Galaxy Ace Plus, Samsung SGH-i777 Galaxy S II

February 27
RIFF JTAG - Samsung GT-P6800 Galaxy Tab 7.7 Unbrick - Boot repair supported

February 24
RIFF JTAG - Samsung YP-G70EW Galaxy S WiFi 5.0 Unbrick - Boot repair

February 17
RIFF JTAG - Samsung P6200, Huawei IDEOS S7, ZTE V9, Orange Boston, and more
Samsung GT-P6200 Galaxy Tab 7.0 Plus Unbrick/Boot repair
ZTE Light Tab (ZTE V9) Unbrick/Boot repair
Huawei Ideos S7 Unbrick/Boot repair
Orange Boston (Commtiva Z71) Unbrick/Boot repair
Samsung Galaxy TAB (P1000N) Unbrick/Boot repair
CDMA Samsung F219 Unbrick/Boot repair
Bug fixes:
QSC1100_X14_NOR,
QSC60XX_L18_D08_NOR,
QSC60XX_L20_D08_NOR,
QSC60XX_L24_D08_NOR

February 15
RIFF JTAG-HTC ThunderBolt 4G ADR6400 (HTC Mecha) Unbrick – Boot repair supported

February 10
RIFF JTAG - Samsung Galaxy Precedent SCH-M828 Unbrick supported

February 08
RIFF JTAG -HTC Droid Incredible 2 ADR6350 Boot repair, Unlock, CID,IMEI Update

February 02
RIFF JTAG -HTC Inspire 4G A9192 (HTC Stallion) Unbrick, Boot, IMEI, CID, ModelID, Unlock

January 11
RIFF JTAG -Samsung GT-i8150 Galaxy W (Samsung Ancora) Unbrick – Boot repair supported

January 10
Riff Box: Samsung SGH-T759 Exhibit 4G Unbrick – Boot Repair supported

January 06
RIFF JTAG - Samsung Galaxy Fit (GT-S5670) Unbrick – Boot Repair supported

December 31
Riff Box: HTC Incredible S Unbrick, Unlock, CID, IMEI repair supported

December 30
Riff Box : Samsung Galaxy Note (GT-i9220) Unbrick – Boot Repair Supported

October 28
RIFF JTAG - Samsung i9003, Samsung m820 supported
Samsung i9003 (Samsung Galaxy SL) Unbrick, boot repair
Samsung m820 (Samsung Galaxy Prevail) Unbrick, boot repair
ZTE RD518 Boot repair
To download and install updates, please close all running applications and press Check for Updates button in RIFF JTAG Manager.
Carefully read resurrection manual for i9003 to avoid frustration !

October 26
RIFF JTAG - Samsung updates
Samsung Galaxy S Plus (i9001) Unbrick, boot repair supported
Whats new : Samsung Galaxy S Plus (i9001)
Please click Check for Updates Button in RIFF JTAG Manager to download and install new files.

October 25
RIFF JTAG - LG & HTC updates
Whats new :
Added support for: LG SH860
Added support for: HTC Desire CDMA
Please click Check for Updates Button in RIFF JTAG Manager to download and install new files.

October 12
RIFF JTAG - HTC updates
12.10.2011 HTC Desire Z (HTC Vision) Update
Whats new :
Added support for HTC Desire Z (HTC Vision)
Please click Check for Updates Button in RIFF JTAG Manager to download and install new files.

October 07
RIFF JTAG - Samsung updates
07.10.2011 Samsung Galaxy II, OMAP4430 version supported (Samsung i9100G, Samsung i9108)
Added support for Samsung Galaxy II, OMAP4430 version supported
Please click Check for Updates Button in RIFF JTAG Manager to download and install new files.
RIFF JTAG - Latest news and Updates !
Released updates :
RIFF JTAG – Samsung S7330 Unbrick, Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – CDMA Samsung B209 Breeze Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung Focus (i917) Unbrick, Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung i997 infuse 4g Unbrick, Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG -CDMA Samsung F619 supported « RIFF Box – JTAG Revolution
RIFF JTAG – JTAG Manager v1.36, RIFF Box firmware v1.27, GDB Server v1.05 released « RIFF Box – JTAG Revolution
Bug fixes :
Samsung_M110S.dll
-------------------------------------
- pinout picture was corrected
Samsung_I9100.dll
-------------------------------------
- DCC Loader now will report eMCC Card product name
HTC_DesireHD.dll, HTC_DesireS.dll
-------------------------------------
- DCC Loader now will report eMCC Card product name
- Resurrection interface was changed to a more flexible one
Samsung_I917.dll
-------------------------------------
- added resurrection data for phone revisions with 2KB-paged NAND chips


October 06
JTAG Manager Version 1.36, RIFF Box Firmware v1.27 Released,Tegra 2 Support
- added fast presets for automatic selection of settings for most common operations on DCC Read/Write page
For this click Settings by Code button and select a desired preset from list and then click Apply Settings.
For example if user selects Write Full Image into NAND memory the valid settings on the DCC Read/Write page
for writting full images into devices with NAND memory will be automatically selected
- fixed serious bug which caused resurrector DLLs which do upload data into RAM to upload broken data
For example DLLs which start Downlad Mode directly use this feature.
- added feature to accept text name of memory chip from DCC Loader and display it (currently used to display eMMC memory product name)
- fixed bug for resumming interrupted DCC Read: ifvcurrently cached file size was greater than > 2GB
(that is if read was interrupted on point when there was already more than 2GB of data read) the new reading data was not appended to the readout file end, but instead the file was corrupted.
- fixed bug for saving big files (after reading on DCC Read/Write page): if size exceeded 0x7FFFFFFF bytes JTAG Manager show no free disk space error.
- added TEGRA2 chipset selection in the Target list
- fixed an issue with the resurrection progress bar: in some cases during resurrection operations the progress bar would always stay at 0%.
Firmware 1.27
---------------------------
- added TEGRA2 debugging support (dual-core Cortex-A9)
- added new breakpoint type: address mismatch which allows geniune single-stepping on Cortex-A8,A9 (CoreSight) targets
(thus GDB Server can now perform low-level single step commands)


October 04
RIFF JTAG - Samsung updates
Added support for Samsung Focus (i917) Unbrick


September 30
RIFF JTAG - New Samsung and CDMA updates
Added support for Samsung AnyCall m110s
Added support for Samsung Wave II (S8530)
Added support for Sungil SXC1080 CDMA Modem
Please click Check for Updates Button in RIFF JTAG Manager to download and install new files.

August 30
RIFF JTAG - 7 new models added
LG GM730
LG TD636
Samsung i5510
Samsung A837
Sierra 597 Compass
Sierra U595
Pantech UM150
Please click Check For Updates button in order to download and apply new updates.

August 23
RIFF JTAG - Samsung Galaxy GIO (S5660) Unbrick - Boot repair supported
23.08.2011 Samsung Galaxy GIO (S5660) Unbrick – Boot repair supported
Samsung S5660 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.
To resurrect Samsung S5660 do this:
Solder JTAG cable to Samsung S5660 JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure Samsung S5660 is selected in the list of models;
Click Resurrect button;
Wait few seconds until software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘OK’ keys and press Power-On to enter Download Mode;
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

August 02
RIFF JTAG - Xperia X8, X10 Mini supported
SonyEricsson Xperia X8/E15 Unbrick, Boot repair, and NAND Chip Backup/Restore
SonnyEricsson Xperia X10a Mini /E10 Unbrick, Boot repair, and NAND Chip Backup/Restore
USB Broadband Modem ZTE MF627 new CPU ID added to allowed list
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

July 12
RIFF JTAG - Samsung T749, Samsung E189 Unbrick - Boot repair supported
The Samsung T749 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect Samsung T749:
Solder JTAG cable to Samsung T749 JTAG pads;
Connect USB cable;
Make sure Samsung T749 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
In case you cannot find firmware files use Global RIFF Link & Data Exchange plugin – at the moment of resurrector release there was shared full dump from alive Samsung T749 phone.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button.
Resurrecting Samsung E189 is simple.
Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0×2256
To resurrect Samsung E189:
Solder JTAG cable to Samsung E189 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Samsung E189 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

April 12
RIFF JTAG - CDMA HTC Droid Eris, HTC Polaris and more
CDMA HTC Droid Eris, Unbrick, Boot Repair, ModelID repair supported
Resurrecting HTC Droid Eris is easy. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PB0010000′.
To resurrect HTC Droid Eris:
Solder JTAG cable to HTC Droid Eris JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Droid Eris is selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold ‘Volume down’ key and press ‘Power ON’ button to enter HBoot menu;
Hold ‘Volume up’ key and press ‘Power ON’ button to enter Recovery mode;
12.04.2011 HTC Polaris (HTC Cruise) Unbrick, Unlock, IMEI and CID Update, ModelID repair supported
Resurrecting HTC Polaris is easy.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.20.AxeBox. Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘POLA10000′.
To resurrect HTC Polaris:
Solder JTAG cable to HTC Polaris JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Polaris selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
12.04.2011 QUALCOMM NOR Generic DLL-s update:
QSC1100_X14_NOR,
QSC60XX_L18_D08_NOR,
QSC60XX_L20_D08_NOR,
QSC60XX_L24_D08_NOR
Whats new:
Added support for NOR Chips which have Intel/Sharp Extended Command Set (according to the CFI specification)
This means any NOR flash chip which is manufactured by CFI standard (it means all NOR flash chips) will be supported with above listed DLL-s. There is no need to update DCC Loaders for single flash chip ID, since configuration data are obtained from CFI.
12.04.2011 RIFF JTAG Manager v1.30, RIFF Box Firmware v1.22 released
Firmware 1.22
Fixed bugs in ARM7 core handling routines
JTAG Manager 1.30
Added DISABLE_POLLING request processing from DCC Loader
(used by DCC Loaders which have small RAM size available and there is no DCC RX polling is implemented in RIFFBOX firmware for current core);
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

March 31
RIFF JTAG Updates - HTC Ozone/Chief, JTAG Manager v1.29 and more
HTC Ozone XV6175 (HTC Chief) Unbrick, Boot Repair, Unlock, IMEI Repair, CID Update supported
Resurrecting HTC Chief is easy:
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.44.0000 SPL version.
Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘CEDA10000′.
As well, you can change CID – for this make sure ‘Repair Custom ID’ field is checked in the Resurrection Guide dialog.
To resurrect HTC Chief:
Solder JTAG cable to HTC Chief JTAG pads;
Make sure HTC Chief is selected in the list of models;
Insert battery and connect USB Cable;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

31.03.2011 JTAG Manager v1.29, RIFF Box Firmware v1.21 released
JTAG Manager 1.29
—————————
Fixed bug with plugins managing in case there is more than 1 plugin DLL available;
Currently selected plugin is remembered now and will stay on next startups;
Fixed Access Violation error during software startup in case there is none resurrector DLL present;
Added Reset Method selection feature for more precise reset operation when Custom Target Settings is active;
Updates manager & Updates tracking were completely reworked, and now are based not on the system time but on file’s hashing.
Thus since now on the JTAG Manager’s installation folder can be copied/moved/re-installed (whatever else) without need to re-download full set of files again.
(SDK): more functions are now available (exported) for future Resurrector DLLs;
Many cosmetic changes;
FINALLY: “healed” the optimized DLL loading scheme:
User shall see: “Found and Initialized: XXX New and YYY Old External Repair Pack(s)” where XXX must be always non-zero only on first startup after there were new DLLs downloaded from the support.
On following JTAG Manager startups XXX shall be always equal to zero (!!!)
For example, after downloading 3 more new DLLs while there were 100 Resurrector DLLs already installed, after JTAG Manager restarts user shall see:
Found and Initialized: 3 New and 100 Old External Repair Pack(s)
on next and all following restarts user shall see:
Found and Initialized: 0 New and 103 Old External Repair Pack(s)
Re-worked balloon hints system – Own (not windows’) balloons are shown, so no matter now what are the windows’ tray icon settings are.
Added balloon hints for cases when target is not detected, error code 0×45, Device Id = 0x000000E1.
Don’t forget that balloons hints can be switched on or off from the DCC Read/Write page – click “Notifications…” and select”For Advanced Users” page to see settings
- JTAG Manager now has new Icons http://www.jtagbox.com/wp-includes/i...icon_smile.gif
- Improved JTAG Manager restarting during updating itself
Firmware 1.21
—————————

Added RX-polling feature (debugger-to-target) for PXA3XX DCC transfers.
RIFF BOX firmware is able now to wait (if resurrector DLL will request so) for PXA3XX target to be ready to accept
next packet over DCC: this feature slows down a little the JTAG-to-Target DCC
transfers but guaranties no packets loss for slow clocked targets;

31.03.2011 RIFF Data Exchange Plugin 1.00 released
First release of the RIFF Data Exchange Plugin: please download it, and then select it on Usefull Plugins page in the JTAG Manager to read short description about the plugin’s abilities. In short it allows RIFF BOX users to share and use Full Image files in centralized manner without need to waste a lot of time for browsing countless forums. Because of big sizes of Full Image files, we don’t host them, instead users share links to file sharing servers where the files are actually uploaded. (like megaupload.com, rapidshare.com and others) You can browse existent links for required image file or share your image file (by sharing a http link) to help other RIFF BOX users.
If you share image file please take attention to carefully fill file details so for other people this to be an easy task to search for required file (link)
If you used link to download file and found it good or bad or link to be broken – please Rate this link so other users see the usability of the link.
At the moment of first release of this plugin there are already few links shared so you’ll catch the idea fast.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

March 12
RIFF JTAG - Samsung i607 Blackjack PDA, CDMA Huawei C5005, OMAP 1710 Support added
12.03.2011 Samsung SGH-i607 BlackJack PDA Unbrick, Dead Boot repair supported
Resurrecting Samsung i607 PDA part is easy. Phone requires battery presence in order to establish JTAG connection. If you additionally connect charger the phone will be auto powered on and there will be no need to press Power on key.
In case you experience connection problems, de-power phone completely, disconnect charger (if it was used), then insert battery, click Resurrection button in the JTAG Manger and immediately (within 0…1 seconds) press Power On key.
To unbrick Samsung i607 PDA part:
Solder JTAG cable to Samsung i607 PDA JTAG pads;
Make sure Samsung i607 PDA is selected in the list of models;
If only battery is connected – press Power On key shortly;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

11.03.2011 CDMA Huawei C5005 Unbrick – Repair supported
Resurrecting Huawei C5005 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0xBFFFFF).
To resurrect Huawei C5005:
Solder JTAG cable to Huawei C5005 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Huawei C5005 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires

March 04
RIFF JTAG - Updates
Qualcom Generic NAND ESM7xxx DLL released
Resurrector ESM7XXX L41 D04 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCUs internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.
Initial H/W init sequence will setup MCUs PLL0 with these parameters:
L/M/N = 0x41/0x00/0x01;
Global Clock Divisor = DIV4
If you dont know what the L, M, N or Global Clock Divisor parameters are, then just keep in mind:
Highest L values and lowest Global Clock Divisor values will make maximum clocking frequency supplied to the MCUs core and thus DCC Read/Write speed will be maximum fast;
Too high frequency supplied to the MCUs core may result in core overheating or instable operation;
..................
Samsung G800 Unbrick, dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_G800.dll” contains pinout, instructions and required repair files for Samsung G800 Unbrick, dead boot repair.
..................
ZTE MF180S Broadband modem Unbrick/Repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF180S.dll” contains pinout, instructions and required repair files for ZTE MF180S Broadband modem Unbrick/Repair boot.

February 18
RIFF JTAG - HTC P3300 (HTC ARTE100, ARTE110) Unbrick - Boot Repair Supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Artemis.dll” contains pinout, instructions and required repair files for HTC P3300 (HTC Artemis 100) Unbrick – Boot Repair.
- Important :
There are 7 devices with Artemis code name. Check Your phone back sticker, if You see ARTE100 or ARTE110 You can repair Your phone.
ARTE200 is NOT tested !.

February 17
RIFF JTAG - HTC P3400 (HTC Gene 100) Unbrick - Boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Gene.dll” contains pinout, instructions and required repair files for HTC P3400 (HTC Gene 100) Unbrick – Boot repair.

February 16
RIFF JTAG - HTC HD7, CDMA Huawei C2906, QSC6xxx Generic DCC Loader
HTC HD7 Unbrick, Unlock, IMEI Repair and CID Update supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_HD7.dll” contains pinout, instructions and required repair files for HTC HD7 Unbrick, Unlock, IMEI Repair and CID Update.
16.02.2011 CDMA Huawei C2906 Boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_C2906.dll” contains pinout, instructions and required repair files for CDMA Huawei C2906 Boot repair, and NOR flash read/write operations.
---------------------
16.02.2011 - Qualcom QSC6xxx DCC Loader released
Resurrector QSC6XXX L36 D08 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCUs internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

February 11
RIFF JTAG - LG P500 Optimus One, HP iPAQ 614 Unbrick/Boot repair supported
10.02.2011 LG P500 Optimus One Unbrick, Dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“LG_P500.dll” contains pinout, instructions and required repair files for LG P500 Optimus One Unbrick, Dead boot repair.

08.02.2011 Hewlett-Packard iPAQ 614 Boot Repair/Unbrick supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“iPak_614.dll” contains pinout, instructions and required repair files for Hewlett-Packard iPAQ 614 Boot Repair/Unbrick.

February 10
RIFF JTAG – RIFF JTAG Manager v1.24, RIFF Box Firmware v1.18 released
Firmware 1.18
---------------------------
- PXA270 debug is now available in ARM/Thumb modes (use the GDBServer for this);
JTAG Manager 1.24
---------------------------
- In case when Resurrector has no DCC Loader the JTAG Manager will now report it correctly and will not allow DCC Read/Write features
- (SDK): more functions are now available (exported) for future Resurrector DLLs;
- Usefull Plugins Enabled
---------------------------
Qualcom FullFlash Image Processing Tool:
This plugin works with NAND image files which have generic Qualcomm layout
With help of this plugin you can do:
- Disassemble a full NAND image file previously obtained with JTAG Manager (DCC Read/Write Page);
- Inspect each partition contents (main zone and spare zone) simultaneously;
- Save separate partitions to HDD (only main zone, only spare zone, or both zones);
- Write a chosen partition directly into phone;
- Read a chosen partition directly from the phone and substitute old partition contents to new ones;
Please note, direct read/write operations from/to the phone will require proper resurrector to be set (Resurrector Settings: thus before clicking the Activate Plugin button make sure compatible model is selected as well as other settings like TCK/RTCK frequencies).
You can access it from Usefull Plugins TAB.

February 09
RIFF JTAG – LG GT540 Optimus Unbrick – Repair Boot supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“LG_GT540.dll” contains pinout, instructions and required repair files for LG GT540 Optimus Unbrick – Repair Dead Boot.
RIFF JTAG – LG GT540 Optimus Unbrick – Repair Boot supported « RIFF Box – JTAG Revolution
RIFF Box firmware v1.17 and RIFF Box JTAG Manager v1.23 required !

February 07
RIFF Box JTAG Manager v1.23, RIFF Box Firmware v1.17 released
Firmware 1.17
---------------------------
Optimized DCC transfers (debugger-to-target) for ARM9 cores (~64,3% speed increase)
Added RX-polling feature (debugger-to-target) for ARM9 DCC transfers.
RIFF BOX firmware is able now to wait (if resurrector DLL will request so) for ARM9 target to be ready to accept next packet over DCC: this feature slows down a little the JTAG-to-ARM9 DCC transfers but guaranties no packets loss for slow clocked targets;
JTAG Manager 1.23
---------------------------
Improved DCC flashing functionality (for DCC Loaders that work in targets with a small RAM capacity);
Added 4 very low RTCK Sampling frequencies (20kHz, 40kHz, 60kHz and 80kHz) for some extreme cases
Fixed another bug in the optimized DLL loading scheme;
Increased ERASE waiting timeout (for slow NOR flash chips) so now erase operation for such chips will go successully and will not result in erase timeout
Added Usefull plugins page;
Usefull Plugins will be new feature, we hope to release first one during this week. So stay tuned.
As usually, click the Check for Updates button to obtain latest files.

January 31
RIFF JTAG - ZTE MF190 Broadband modem Unbrick, Dead boot repair supported
ZTE MF190 Broadband modem Unbrick, Dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF190.dll” contains pinout, instructions and required repair files for ZTE MF190 Broadband modem Unbrick, Dead boot repair.

January 28
RIFF JTAG - DELL Streak (DELL Mini 5) Unbrick/Dead boot repair supported
Dell Streak (Dell Mini 5) Unbrick – Repair dead boot supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Dell_Streak.dll” contains pinout, instructions and required repair files for Dell Streak (Dell Mini 5) Unbrick – Repair dead boot.

January 24
RIFF JTAG - CDMA Updates - Haier C2076, ZTE S100 Supported
24.01.2011 CDMA Update Haier C2076 Boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Haier_C2076.dll” contains pinout, instructions and required repair files for Haier C2076 Boot repair Unbrick, Dead Boot repair.
24.01.2011 CDMA Update – ZTE S100 Boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_S100.dll” contains pinout, instructions and required repair files for ZTE S100 Unbrick, Dead Boot repair.

December 29
RIFF JTAG - Huawei EC189 Broadband Modem Unbrick, Dead Boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_EC189.dll” contains pinout, instructions and required repair files for Huawei EC189 Broadband Modem Unbrick, Dead Boot repair.

December 27
RIFF JTAG - Samsung i5800 Galaxy 3 World First Support
LEFT27.12.2010 Samsung i5800 Galaxy 3 Unbrick, Dead Boot Repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i5800.dll” contains pinout, instructions and required repair files for Samsung i5800 Galaxy 3 Unbrick/Dead boot repair. This is also world first Samsung S5P6422 CPU support.

December 24
RIFF JTAG Updates - JTAG Manager v1.21, HTC Desire Model ID repair
JTAG Manager 1.21
---------------------------
- Startup is optimized: DLLs initialization time now is 1 second maximum no matter how many DLLs are present.
HTC Desire new DLL
---------------------------
- Added support for Model ID repair (Unknown Model problem)
- Added support for new partition layout Simlock
- Fixed bug with unlocking
Please click Check for Updates button to download latest updates.

December 16
RIFF JTAG – JTAG Manager v1.20, RIFF Box firmware v1.16 released
Whats new :
JTAG Manager 1.20
- added 4.2V power supply output (RIFF RJ45 pin 1) controlling feature
For this go to DCC Read/Write page, click “Notifications…”, the Notifications dialog will be displayed,
go to “For Advanced Users” page and set desired mode for “Enable 4.2V output” checkbox.
When enabled, 4.2V line will be powered on after any “JTAG” operation executed and will remain “ON” until
box restart or until “Enable 4.2V output” checkbox is unchecked and any “JTAG” operation is executed.
- (SDK): exported new SUB_ID_GET_ROM_INFO function for resurrectors;

Firmware 1.16
- code is optimized to avoid deadlocks in ARM11 handling routines;
- reset sequence (after NRST assertion) is optimized for ARM11 core;
- added 4.2V power supply output (RIFF RJ45 pin 1) controlling feature
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new files, download it and restart the software.

HTC Desire new security update is released too.
- Added support for new flash chip
- Added automatic detection of page size

December 16
RIFF JTAG – DELL XCD28 (ZTE Racer) Unbrick, dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“DELL_XCD28.dll” contains pinout, instructions and required repair files for DELL XCD28 (ZTE Racer) Unbrick, dead boot repair.

December 14
RIFF JTAG - Samsung CDMA A900 Blade, Samsung SGH Z540 supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_A900.dll” contains pinout, instructions and required repair files for Samsung A900 Blade Unbrick/Dead boot repair.

Samsung Z540 Unbrick/Dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_Z540.dll” contains pinout, instructions and required repair files for Samsung Z540 Unbrick/Dead boot repair.


December 10
RIFF JTAG – CDMA Update, ZTE-C N600 Boot repair/Unbrick supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_N600.dll” contains pinout, instructions and required repair files for ZTE-C N600 Unbrick/Boot repair.

December 01
RIFF JTAG – CDMA Android update – Huawei C8500 Unbrick/Boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_C8500.dll” contains pinout, instructions and required repair files for Huawei C8500 Unbrick/Boot repair.

November 30
RIFF JTAG – HTC Hero (G2 Touch) Unlock, IMEI , CID Update, Unbrick – Boot repair
HTC Hero (G2 Touch)Unlock, IMEI , CID Update, Unbrick – Boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Hero.dll” contains pinout, instructions and required repair files for HTC Wildfire Unlock, IMEI Repair, CID Update, Unbrick – Boot repair.

November 29
RIFF JTAG – HTC Wildfire Unlock, IMEI Repair, CID Update, Unbrick – Boot repair
HTC Wildfire Unlock, IMEI Repair, CID Update, Unbrick – Boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Wildfire.dll” contains pinout, instructions and required repair files for HTC Wildfire Unlock, IMEI Repair, CID Update, Unbrick – Boot repair.

November 26
RIFF JTAG - Samsung Galaxy TAB (Samsung P1000) Unbrick, Dead boot repair supported! !
26.11.2010 Samsung Galaxy TAB (Samsung P1000) Unbrick, Repair dead boot supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_P1000.dll” contains pinout, instructions and required repair files for Samsung Galaxy TAB (Samsung P1000) Unbrick, Repair dead boot.

November 24
RIFF JTAG – CDMA Update – 3 New models supported
LG RD3540
LG RD3610
LG RD6100
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
There is 3 new DLL-s for LG CDMA models, containing pinout, boot files and firmware parts for listed models.

November 23
RIFF JTAG – CDMA Update – 4 new LG CDMA Models supported
LG RD3000
LG RD3100
LG RD3500
LG RD3510
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
There is 4 new DLL-s for LG CDMA models, containing pinout, boot files and firmware parts for listed models.

October 29
RIFF JTAG - Samsung i5500 Galaxy Unbrick, Dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i5500.dll” contains pinout, instructions and required repair files for Samsung i5500 Galaxy Unbrick, Dead boot repair.

October 29
RIFF JTAG - Samsung t669 Gravity Unbrick, Dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_t669.dll” contains pinout, instructions and required repair files for Samsung t669 Gravity Unbrick, Dead boot repair.

October 27
RIFF JTAG - Samsung i897 Captivate Galaxy S Unbrick, Dead boot repair, Download mode
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i897.dll” contains pinout, instructions and required repair files for Samsung i897 Captivate Galaxy S Unbrick, Dead boot repair and Download mode activation.

October 25
RIFF JTAG - HTC Legend A6363 Unlock, Unbrick, , CID supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Legend.dll” contains pinout, instructions and required repair files for HTC Legend A6363Unlock, Unbrick, , CID.
Big thanks to Jodge and RIFF JTAG Pin Detection feature !

October 22
RIFF JTAG - HTC Touch P3452 - HTC Elfin Ubrick - Boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Elf.dll” contains pinout, instructions and required repair files for HTC Touch P3452 – HTC Elfin unbrick/bootloader restore.

October 22
RIFF JTAG - Huawei E160 Broadband modem unbrick
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E160.dll” contains pinout, repair instructions and required files for single click Huawei E160 broadband modem unbrick, boot, AMSS,EFS, MMC, OEMInfo reflash.
“Huawei_E160G.dll” contains pinout, repair instructions and required files for single click Huawei E160G broadband modem unbrick, boot, AMSS,EFS, MMC, OEMInfo reflash.

October 21
RIFF JTAG - New HTC, Samsung SonyEricsson added
HTC Jade (HTC Touch 3G T3232) Unlock, Unbrick, CID Change supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Jade.dll” contains pinout, instructions and required repair files for HTC Jade (HTC Touch 3G T3232) Unlock, Unbrick, CID Change.
SE Xperia X1 (HTC Kovalsky) Unbrick, Unlock, Model ID repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“SE_X1.dll” contains pinout, instructions and required repair files for SE Xperia X1 (HTC Kovalsky) Unbrick, Unlock, Model ID repair.
Samsung S5510 Unbrick, dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_s5510.dll” contains pinout, instructions and required repair files for Samsung S5510 Unbrick, dead boot repair.

October 21
RIFF JTAG - Samsung CDMA i910 Omnia Unbrick, dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i910_PDA.dll” contains pinout, instructions and required repair files for Samsung CDMA i910 Omnia Unbrick, dead boot repair.


October 20
RIFF JTAG - JTAG Manager v1.19 released
Added feature to temprorarily switch off Device ID check for DCC Read/Write pages operations thus it makes possible to test yet not supported board to be compatible with one of existent DLLs.
For this: when Resurrector Settings is active, the DCC Loader Settings button is transformed into Special Settings button. Click it to setup the ID checking on or off. This setting is discarded to ID Check ON on each startup of JTAG Manager.
Fixed bug which caused Data Length label not to be changed to End Address upon the JTAG Manager startup when the Use End Address not Length box was checked;
Added hint messages for inexperienced users: short hints about how to solve a problem will popup if some JTAG communication error is encountered for Advanced users there is option to switch off such hints.
Added feature to Forcefully display the Resurrection Manual window prior the Resurrection operation for inexperienced users for Advanced users there is option to switch off this feature.
Please click Check for Updates button to download latest update.


October 18
RIFF JTAG - HTC Raphael – HTC Touch Pro T7272 Unlock, Unbrick
19.10.2010 HTC Raphael – HTC Touch Pro T7272 Unlock, Unbrick
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_raphael.dll” contains pinout, repair instructions and required repair files for direct HTC Raphael – HTC Touch Pro T7272 Unlock, Unbrick, Change, CID Change.
HTC Niki – HTC Touch Dual Unlock, Unbrick
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Niki.dll” contains pinout, repair instructions and required repair files for direct HTC Niki – HTC Touch Dual Unlock, Unbrick
RIFF JTAG – Samsung T959 Vibrant Galaxy S Unbrick bricked boot supported
RIFF JTAG – HTC Dash Unlock, Unbrick
RIFF JTAG – HTC Touch Pro2 T7373 (HTC Rhodium 100) Unlock, Unbrick
RIFF JTAG - HTC Tattoo - HTC Click100 Unlock, Unbrick
RIFF JTAG - RIFF JTAG – Samsung i560 Unbrick/Repair dead boot supported
RIFF JTAG – HTC Snap-Maple120 Unlock/Unbrick
RIFF JTAG – HTC Imagio WhiteStone Unlock, Unbrick
RIFF Box JTAG Manager Version 1.17- JTAG Pins Detection added
RIFF JTAG – Samsung i740 Modem and PDA Unbrick-Repair dead boot supported
RIFF JTAG – HTC HD2 LEO Unlock update
RIFF JTAG - HTC Mega Touch2 Unlock,Unbrick
RIFF JTAG - ZTE MF170 Broadband modem Unbrick/Repair supported
RIFF JTAG - CDMA Huawei C2901M Unbrick/Repair supported
RIFF Goes CDMA ! Huawei C2806m repair supported !
RIFF JTAG – HTC Touch HD Unbrick, Unlock supported
RIFF JTAG – Huawei Broadband modem E169 Unbrick/Repair supported
RIFF JTAG – Huawei Broadband Modem E585 unbrick supported
RIFF JTAG – Huawei broadband modem E170/E172 unbrick supported
RIFF JTAG Update - ROM2 Support for HTC Desire and HTC Magic 32


24.09.2010 Huawei E220 Broadband modem unbrick/repair dead boot

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E220.dll” contains pinout, repair instructions and required files for single click Huawei E220 broadband modem unbrick/repair dead boot and firmware damages.

22.09.2010 HTC Nexus One Unlock/Unbrick/IMEI Repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Nexus.dll” contains pinout, repair instructions and required files for single click HTC Nexus One Unlock, Unbrick, IMEI repair.


20.09.2010 – HTC Desire new revision boards supported!
Whats new:
•Added optional selection for SPL versions
•Added direct Unlock function without SPL reflashing
As already noted before, the HTC Desire is being shipped now with SLCD display type, instead of previous AMOLED.
Now You can chose SPL version to be used, 0.80.0000, or 0.92.0007. Latest SPL supports both display types, but at the moment this SPL isn’t rooted as we know.
Here is how it works now:
If You want just to repair the SPL, Untick the IMEI and HTC Partition check boxes.
If phone IMEI or eeprom is damaged, You need to tick the HTC Partition and IMEI check boxes, and of course fill out the desired IMEI.
If You just want to unlock phone, without any other repairs, select “Unlock Settings” TAB and press “Unlock” button:
This function will unlock the phone without touching any other memory part.

15.09.2010 Samsung Galaxy S – i9000 unbricking supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i9000.dll” contains pinout, repair instructions and required files for single click Samsung Galaxy S – i9000 Unbrick/Repair bricked boot.

15.09.2010 Samsung S3370 Unbrick/Repair bricked phones supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_S3370.dll” contains pinout, repair instructions and required files for single click Samsung S3370 Unbrick/Repair dead boot.

15.09.2010 Samsung C5510 Unbrick/Repair DLL Update
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_C5510.dll” contains required files for unbrick/repair bricked Samsung C5510.

11.09.2010 Samsung m8910 Unbrick/repair dead boot supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_m8910.dll” contains required files for unbrick/repair bricked Samsung m8910.


11.09.2010 Samsung i8320 modem part Unbrick/repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i8320_mdm.dll” contains required repair files for i8320 modem part.

11.09.2010 Samsung i8510 Unbrick/Repair dead boot supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i8510_PDA.dll” contains pinout, repair instructions and required files for single click Samsung I8510 Innov8 Unbrick/Repair dead PDA part boot.
Leave a Comment :bricked samsung, Dll Download, i8510 unbrick, Innov8, Innova unbrick, JTAG, Riff, Samsung, Samsung Pda, Samsung Unbrick, Software Pda, Software Samsung more...


03.09.2010 HTC Desire Unlock, Unbrick, IMEI repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Desire.dll” contains pinout, repair instructions and required files for single click HTC Desire Unlock, Unbrick, IMEI repair.

02.09.2010 Samsung I5700 Galaxy Lite Unbrick/Repair dead boot supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i5700_PDA.dll” contains pinout, repair instructions and required files for single click Samsung I5700 Galaxy Lite Unbrick/Repair dead boot.

02.09.2010 Samsung WAVE Single Click Unbrick/Repair dead boot released
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_S8500.dll” contains pinout, repair instructions and required files for single click Samsung WAVE S8500 Unbrick/Repair dead boot.


02.09.2010 HTC HD2 LEO Direct Unlock supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_HD2.dll” contains pinout, repair instructions and required repair files for direct HTC HD2 LEO unlock, unbrick and IMEI repair.

02.09.2010 Samsung GT-S5230 Hello Kitty Unbrick/Repair dead boot released
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_S5230.dll” contains pinout, repair instructions and required repair files for all versions of GT-S5230 Samsung (M, W, T, Hello Kitty)

02.09.2010 JTAG Manager v1.14 released
Whats new:
JTAG Manger 1.14
———————
- Increased internal buffers size to support NAND devices with 4KB/256KB Page/Block size which makes possible now to run Samsung S8500 fully functional resurrector;
- Added OneNAND 2K/4K pages size selection for DCC Loader setup in Custom Target Settings mode; (make sure you use latest OneNAND standalone DCC loaders; old OneNAND loaders may not start on the 1.14 JTAG Manager version);
- Fixed: now OneNAND settings (in DCC Loader Settings) are not discarded to defaults on next software startup.
- Improved presets loading sequence; – (SDK): exported new SUB_ID_SET_JTAG_SPEED function for resurrectors; Please click “Check for updates” button to download new version.


31.08.2010 Samsung WAVE S8500 Unbrick/Repair boot beta support
This is beta test, and it is not available trough “Check for updates” button.
What You need to repair it ?
- RIFF Box
- Micro USB Cable
- Full charged battery (4.2v)
- CMM + ELF
- Samsung_S8500_PDA.dll
- Pinout
- Multiloader
- USB Drivers
- Firmware files
Procedure:
- Solder RIFF JTAG cable (use very thin wires for PCB, because of battery)
- Insert battery
- Connect Micro USB cable to phone and PC port
- Start the JTAG Manager and select Samsung S8500 PDA from the list
- Switch to “DCC Read/Write” TAB
- Set everything as on photo bellow:
- Press “Read memory” and wait to be finished
- Now switch to “JTAG Read/Write” TAB and press “Connect&Get ID” then “Halt the Target” buttons
- Click “Execute Script” and select CMM file
- Press “Run Script” button
- Ram loader will be uploaded and after its uploaded, phone will automaticaly enter download mode, and detected by PC
- IMPORTANT ! ! ! Now You must disconnect JTAG Cable from RIFF Box
- Start Multiloader 5.62, set “Boot repair” and select Boot files folder
- Press download – and wait for process to be finished
- Now phone contains valid bootloader, and can be flashed, so You can desolder JTAG wires from PCB
To enter download mode hold LOCK+Volume Down + Power on Keys.
Problems which You may have:
- Target not detected – check all wires and tp, check battery, 4.2v is a MUST !
- Wrong DCC answer – low battery, or TCK too high, You can use 100KHz TCK too !
- “It not work” – no idea about this lol


28.08.2010 ZTE MF628 broadband modem unbrick/repair updated
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF628.dll” contains pinout, repair instructions and required repair files for ZTE MF628 broadband modem unbrick/repair.

28.08.2010 ZTE MF622 broadband modem unbrick/repair updated.
- Fixed bug with DCC loader, added help and test point image.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF622.dll” contains pinout, repair instructions and required repair files for ZTE MF622 broadband modem unbrick/repair.


27.08.2010 HUawei E1550 broadband modem unbrick/repair updated
- Now resurrector contains both 64MB and 128MB repair firmware data And deletrmines 64 or 128MB modem version automatically – thus it flashes valid firmware.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E1550.dll” contains pinout, repair instructions and required repair files for Huawei E1550 broadband modem unbrick/repair.
 

27.08.2010 Samsung z240 Unbrick/Repair dead boot supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_Z240.dll” contains pinout, repair instructions and required repair files for Samsung Z240 phone.

27.08.2010 – HTC Magic32 – SAPP300 – G2 unbrick/repair IMEI supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Magic32A.dll” contains pinout, repair instructions and required repair files for both “Sapphire100″ and “Sapphire300″ HTC Magic32A G2 phones.

27.08.2010 JTAG Manager v1.13, JTAG Firmware v1.13 released
Whats new:
JTAG Manger 1.13
———————
- Added feature to display FLASH chip capacity information
- Added feature ‘Auto FullFlash size’ to DCC Read/Write page for simplified Full Images reading/writting
- Fixed DCC Loader Settings dialog
- Added resurrector interface function ‘GetChipSize’ which now enables resurrector DLL to receive target’s memory size
for proper data selection for flashing (like in Huawei Modem E1550 64/128MB versions);
Firmware 1.13
———————
- fixed ARM9 core debug capabilities when core is in Thumb mode
(when ARM9 core was entering debug from Thumb state some CPSR register’s flags were lost, same was when core was leaving debug into Thumb mode);
- FFFFFFEE instruction was added into HAS scripts processing module;
Click “Check for Updates” button to download new JTAG Manager and JTAG firmware.


24.08.2010 ZTE MF112 modem unbrick/repair supported.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“ZTE_MF112.dll” contains pinout, repair instructions and required repair files for ZTE MF112 Modem unbrick, dead boot repair.

24.08.2010 Samsung i780 Phone part unbrick/repair supported.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_i780_Modem.dll” contains pinout, repair instructions and required repair files for Samsung i780 phone part unbrick, dead boot repair.

20.08.2010 ZTE MF100 modem unbrick/repair supported.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“ZTE_MF100.dll” contains pinout, repair instructions and required repair files for ZTE MF100 Modem unbrick, dead boot repair.

17.08.2010 RIFF JTAG – Samsung i900 Omnia unbrick, dead boot repair instructions updated
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_i900_modem.dll” contains pinout, repair instructions and required repair files for Samsung i900 Modem part unbrick, dead boot repair.
“Samsung_i900_PDA.dll” contains pinout, repair instructions and required repair files for Samsung i900 PDA part unbrick, dead boot repair.

16.08.2010 RIFF JTAG HTC Dream, Google G1 Update – added 8 bit bus support
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“HTC_Dream.dll” contains pinout, repair instructions and required repair files for HTC Dream Google G1 Unbrick, Unlock and IMEI repair.

16.08.2010 RIFF JTAG – Samsung i7500 unbrick, dead boot repair
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_i7500.dll” contains pinout, repair instructions and required repair files for Samsung Galaxy i7500 unbrick, dead boot repair.

06.08.2010 RIFF JTAG – Samsung i8510 unbrick, dead boot repair
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_i8510_modem.dll” contains pinout, repair instructions and required repair files for Samsung i8510 unbrick, dead boot repair.

06.08.2010 RIFF JTAG – Toshiba G810 Unbrick, dead boot repair
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Toshiba_G810.dll” contains pinout, repair instructions and required repair files for Toshiba G810 Unbrick, dead boot repair.


06.08.2010 RIFF JTAG – HTC Herald Unbrick, dead boot repair
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.“HTC_Herald.dll” contains pinout, repair instructions and required repair files for HTC Herald Unbrick, dead boot repair.


JTAG Manager 1.12
——————
- Added mutlichain options support for CMM scripts
- Added advanced multichain setup (“Advanced…” in the TAP# field)
- Added Cortex-A8 processor selection
- Added BOX pinout button (which is placed on Resurrection page)
Firmware 1.12
——————
- Addedd Cortex-A8 core 16-bit and 8-bit bus read/writes (which are be used in scripts mostly)
- Addedd CoreSight DAP ROM Table processing for automatic ARM core search.
- Addedd advanced MultiChain selection (IRPRE, IRPOST, DRPRE, DRPOST) in case simple TAP number is impossible to select (like in OMAP850)
- Addedd feature to set custom timeout after NRST is asserted back to high level
(for backward compatibility default timeout for ARM9 is set to 10ms, for other cores – 0ms)
Please start the JTAG Manager and click “Check for updates” button. You’ll be notified about new updates. Download everything and restart the software.
Box firmware will be updated automatically, but in case box stucks in bootcore mode, update firmware manually. Make sure to select v1.12 firmware.
Enjoy making $$$$ with RIFF Box !

04.08.2010 RIFF JTAG – Samsung S5560 dead boot repair
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_s5560.dll” contains pinout, repair instructions and required repair files for Samsung S5560 dead boot repair.


04.08.2010 ZTE MF627 Modem Unbrick dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“ZTE_MF626.dll” contains pinout, repair instructions and required repair files for ZTE MF626, MF627 Modem dead boot repair.


03.08.2010 RIFF JTAG – HTC Topaz – Diamond2 Unbrick, Unlock, IMEI repair.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“HTC_Topaz.dll” contains pinout, repair instructions and required repair files for HTC Topaz – Diamond2 Unbrick, Unlock, IMEI repair.


03.08.2010 HTC Dream Google G1 Unbrick, Unlock, IMEI repair.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“HTC_Dream.dll” contains pinout, repair instructions and required repair files for HTC Dream Google G1 Unbrick, Unlock and IMEI repair.


29.07.2010 HTC Touch Pro 2 – Rhodium W unbrick – Repair dead boot.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“HTC_RhodiumW.dll” contains pinout, repair instructions and required repair files for HTC Touch Pro 2 – Rhodium W Unbrick – repair dead boot.


28.07.2010 Toshiba G910 Unbrick – repair dead boot.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Toshiba_g910.dll” contains pinout, repair instructions and required repair files for SToshiba G910 Unbrick – repair dead boot.

24.07.2010 Samsung i8000 – Omnia II dead boot repair added.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_i8000.dll” contains pinout, repair instructions and required repair files for Samsung i8000 dead boot repair.


22.07.2010 Samsung U800 and Samsung i718 dead booot Repair DLL-s added
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_u800.dll” contains pinout, repair instructions and required repair files for Samsung U800.
“Samsung_i718.dll” contains modem pinout, repair instructions and required repair files for Samsung i718 modem part.



21.07.2010 Samsung F480 dead boot repair.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_f480.dll”l contains pinout, repair instructions and required repair files.


16.07.2010 Samsung I780 dead PDA repair.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i780_PDA.dll”l contains pinout, repair instructions and required repair files.


15.07.20010 Samsung M7500 repair DLL added.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
Samsung_M7500.dll contains pinout, repair instructions and required repair files.

ULY 14
RIFF JTAG Manager v1.11 Released - HTC IMEI Repair
RIFF JTAG Update - Samsung i780 PDA repair
RIFF JTAG Samsung F480 dead boot repair
RIFF JTAG - Samsung i718 PDA repair
RIFF JTAG Update - Samsung U800 dead boot repair
RIFF JTAG Updates - Samsung i8000 Omnia II dead boot repair
RIFF JTAG Toshiba G910 Unbrick – repair dead boot
RIFF JTAG HTC Touch Pro 2 – Rhodium W unbrick – Repair dead boot and IMEI
Added support for HTC Phones dead boot repair
Added RIFF Box firmware v1.11
Added HTC DIAMOND DLL with pinout and IMEI repair
Added HTC HD2 LEO DLL with pinout and IMEI repair
Added HTC Magic 32A DLL with pinout and IMEI repair
Added HTC Magic 32B DLL with pinout and IMEI repair
Please run JTAG Manager and click Check for updates button. Youll have list of new files, which will be downloaded.
READ THE MANUAL before starting with repair, and make sure You have updated RIFF box firmware !

Box info should show this :
Code:
Open serial port...OK
Connecting to the RIFF Box...OK

Getting RIFF Box Info...OK
RIFF Box S/N: FF.FFFF:FFFF-FFFF:FFFF
RIFF Box Firmware Version: 1.11
Pinout photo is available once You select desired model. Button Interface Pinout will apear.
Repair manual You can read if You click Resurrection Help button.

JULY 08
JTAG Manager Version 1.10 Released for RIFF JTAG Box
RIFF JTAG Features:
RIFF JTAG firmware supports following features at the moment:
ARM7/ARM9/ARM11 PXA3xx, PXA270 cores support;
Multiple devices on JTAG chain are supported, thus TAP number selection is available;
Any custom voltage level selection from range ~1.4V to 3.3V
TCK/Adaptive clocking selection
Halt core (NRST is not repaird)
Reset core (NRST is applied before halt)
Direct Read memory (by 8/16/32-bit bytes/half-words/words)
Direct Write memory (by 8/16/32-bit bytes/half-words/words)
Access to the control registers of ARM core (coprocessor 15)
Program code breakpoints
Run core
Custom scripting and DCC loader support (trace32 compatible)
Custom GDB Server Available
This is result of six months hard work. And we just started -
Stay tuned for more !

This is the list of available RIFF JTAG Resurrectors DLL-s , which You can use for one click dead boot repair.
List will be updated with new releases, and this is only small part of models we will add.

Samsung Phones :
Samsung_B7330.dll
Samsung_C5510.dll
Samsung_F500_mdm.dll
Samsung_G810_mdm.dll
Samsung_G810_PDA.dll
Samsung_i450_mdm.dll
Samsung_i450_PDA.dll
Samsung_i550_mdm.dll
Samsung_i550_PDA.dll
Samsung_i710.dll
Samsung_i740_PDA.dll
Samsung_i8910_mdm.dll
Samsung_i8910_PDA.dll
Samsung_i900_mdm.dll
Samsung_i900_PDA.dll
Samsung_M7600.dll
Samsung_S3310.dll
Samsung_S5230.dll
Samsung_S5600.dll
Samsung_S7070.dll
Samsung_S7350.dll
Samsung_S7350i.dll
Samsung_S8000.dll
Samsung_S8300.dll
Samsung_T919.dll
Samsung_U700.dll
Samsung_U900V.dll

ZTE Modems:
ZTE_MF622.dll
ZTE_MF626.dll

DAEWOO GPS Device :
Daewoo_DPN3500.dll
HUAWEI Modems:
Huawei_E1550.dll
ETEN Communicator:
Eten_X800.dll
 

Related products
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart
    • $3.78

    Not rated yet
  • Drag and drop me to the cart
    • $5.40

    Not rated yet
  • Drag and drop me to the cart
    • $64.87

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart
    • $3.23

    Not rated yet
  • Drag and drop me to the cart
    • $3.78

    Not rated yet
  • Drag and drop me to the cart
    • $5.40

    Not rated yet
  • Drag and drop me to the cart
    • $5.40

    Not rated yet
  • Drag and drop me to the cart
    • $5.40

    Not rated yet
  • Drag and drop me to the cart
    • $10.80

    Not rated yet
  • Drag and drop me to the cart
    • $4.31

    Not rated yet
  • Drag and drop me to the cart
    • $1225.24

    Not rated yet
  • Drag and drop me to the cart
    • $1048.97

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart
    • $21.62

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart
    • $10.81

    Not rated yet
  • Drag and drop me to the cart
    • $173.01

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart
    • $90.83

    Score: 5.00 (votes: 1)
Customers who bought this product also bought
  • Drag and drop me to the cart
    • $200.05

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart
    • $5.40

    Not rated yet
  • Drag and drop me to the cart
    • $179.51

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart
    • $7.57

    Not rated yet
  • Drag and drop me to the cart
    • $27.02

    Not rated yet
Customers who viewed this product bought
  • Drag and drop me to the cart
    • $1225.24

    Not rated yet
  • Drag and drop me to the cart
    • $363.36

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart
    • $118.95

    Score: 5.00 (votes: 3)
  • Drag and drop me to the cart
    • $162.20

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart
    • $155.71

    Score: 5.00 (votes: 1)