{"title":"Hot picks","description":null,"products":[{"product_id":"z3x-easy-jtag-plus-box-full-set","title":"Z3X Easy Jtag Plus Box e-Sim Edition (Full Set)","description":"\u003cp\u003eThe Z3X Easy Jtag Plus Box Full Set is a programmer for two jobs: JTAG repair and boot recovery, and mobile forensics and physical data recovery. It reads and writes eMMC, UFS, NAND and SPI memory, and it connects by JTAG, ISP or chip-off. When a phone will not start, you can use it to recover the boot by rewriting or reconfiguring the memory, or to read the data off at board level.\u003c\/p\u003e\n\u003cp\u003eThe Full Set adds the Z3X eMMC socket, so you can read or program a removed eMMC chip directly. It takes BGA153\/169, BGA162\/186, BGA221 and BGA529 packages. UFS sockets are not included. They are sold separately, for example the \u003ca href=\"\/products\/icfriend-easy-jtag-plus-ufs-6in1-socket\" title=\"ICFriend Easy Jtag Plus UFS 6 in 1 Socket\"\u003eICFriend Easy Jtag Plus UFS 6 in 1 Socket\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003ee-Sim edition:\u003c\/strong\u003e the authentication chip is on the logic board. There is no activation card to insert.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJTAG repair and boot recovery features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eJTAG access, with a JTAG pin finder for locating test points.\u003c\/li\u003e\n\u003cli\u003eeMMC dead-boot recovery, including Samsung eMMC dead recovery.\u003c\/li\u003e\n\u003cli\u003eeMMC firmware updates and JEDEC 5.1 reconfiguration.\u003c\/li\u003e\n\u003cli\u003eeMMC, UFS 2.0, UFS 2.1, NAND and SPI flash programming (write).\u003c\/li\u003e\n\u003cli\u003eProgramming of removed eMMC chips in the included Z3X eMMC socket.\u003c\/li\u003e\n\u003cli\u003eAutomatic and manual repair modes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eForensics and data recovery features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChip-off reads of removed eMMC chips in the included Z3X eMMC socket.\u003c\/li\u003e\n\u003cli\u003eChip-off reads of UFS chips with an optional socket.\u003c\/li\u003e\n\u003cli\u003eISP reads of eMMC with the chip left on the board.\u003c\/li\u003e\n\u003cli\u003eJTAG access on boards that will not boot, for reading memory in place.\u003c\/li\u003e\n\u003cli\u003eeMMC, UFS 2.0, UFS 2.1 and NAND readback, including Apple PPN NAND.\u003c\/li\u003e\n\u003cli\u003eSPI flash and SD card reading.\u003c\/li\u003e\n\u003cli\u003eAndroid file explorer for recovered eMMC partitions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBox and software\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ee-Sim edition: the activation chip is on the board, with no card to insert.\u003c\/li\u003e\n\u003cli\u003eWorks with Z3X software through the onboard PC\/SC-CCID USB reader.\u003c\/li\u003e\n\u003cli\u003eOpen SDK for use with other tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt runs on Windows XP, Vista, 7, 8, 10 and 11. A setup note is included with the order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecent updates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEasyJTAG Plus 2.1.0.0 (December 2025):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUFS smart report for chip health and configuration.\u003c\/li\u003e\n\u003cli\u003eUFS unlock and DataProtect removal on compatible chips.\u003c\/li\u003e\n\u003cli\u003eExplorer reads EXT, FAT, NTFS, EROFS and F2FS partitions.\u003c\/li\u003e\n\u003cli\u003eManual partition-table scan for damaged or non-standard layouts.\u003c\/li\u003e\n\u003cli\u003eQualcomm A\/B boot-slot switching.\u003c\/li\u003e\n\u003cli\u003eVendor flashing for MediaTek, Unisoc and Nvidia Tegra.\u003c\/li\u003e\n\u003cli\u003eFirmware unpackers for OFP, PAC, NB0 and LG packages.\u003c\/li\u003e\n\u003cli\u003eeSIM support for boxes activated after September 2025.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEasyJTAG Classic 3.8.0.15 (April 2026):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eeMMC force bootrom mode for dead-boot devices.\u003c\/li\u003e\n\u003cli\u003eUFS WriteBooster read, write and edit.\u003c\/li\u003e\n\u003cli\u003eUFS SCSI VPD and extended feature display.\u003c\/li\u003e\n\u003cli\u003eSSR support for newer SanDisk and Toshiba UFS.\u003c\/li\u003e\n\u003cli\u003eFixes for YMTC8 and YMTC9 UFS chips.\u003c\/li\u003e\n\u003cli\u003eBuilt-in hex editor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage contents\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Z3X Easy Jtag Plus Box, e-Sim edition (UFS functions included, pre-activated)\u003c\/li\u003e\n\u003cli\u003e1 x Z3X eMMC socket (BGA153\/169, BGA162\/186, BGA221, BGA529)\u003c\/li\u003e\n\u003cli\u003e1 x USB A-B cable\u003c\/li\u003e\n\u003cli\u003e2 x eMMC adapters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":48241573560601,"sku":"easyjtagf","price":499.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/easyjtagplusfull1.jpg?v=1746189510"},{"product_id":"flash-64","title":"Flash 64 Ultra NAND programmer for UFS eMMC MicroSD NanoSD","description":"\u003cp\u003eThe Flash 64 Ultra is a managed NAND programmer for UFS, eMMC, MicroSD and NanoSD (NM) storage. It is aimed at mobile forensics, physical data recovery and chip-level repair work, where a memory chip needs to be read, written or configured directly.\u003c\/p\u003e\u003cp\u003eThe kit includes a 4-in-1 eMMC adapter and three UFS adapters for 153, 254 and 297-ball packages, so the common phone storage chips can be handled from one box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFull UFS Compatibility: Supports UFS 1.0 to 4.1, with HS-Gear speeds up to 420 MB\/s.\u003c\/li\u003e\n\u003cli\u003eeMMC Support: eMMC v4.1 to 5.1 at up to 8-bit HS200, 200 MB\/s.\u003c\/li\u003e\n\u003cli\u003eNano Memory Card (NM) Support: Reads and writes at 90 MB\/s in 4-bit mode.\u003c\/li\u003e\n\u003cli\u003eMicroSD Versatility: SDSC, SDHC, SDXC and SDUC, with UHS-I speeds up to 104 MB\/s.\u003c\/li\u003e\n\u003cli\u003eMulti-Interface Support: RFFE, JTAG, SPI, I2C and UART.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eData Access:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-Level Access: Read and write Android OS partitions.\u003c\/li\u003e\n\u003cli\u003eLow-Level Access: Work directly with RAW partitions, logical units and RPMB.\u003c\/li\u003e\n\u003cli\u003eUFS and eMMC Configuration: Edit UFS descriptors, attributes and flags, with full eMMC Extended CSD access.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCPU: Xtensa LX7 MCU @ 240 MHz\u003c\/li\u003e\n\u003cli\u003eExternal SRAM: 8 MB\u003c\/li\u003e\n\u003cli\u003eInternal SRAM: 512 KB\u003c\/li\u003e\n\u003cli\u003eFlash Memory: 16 MB\u003c\/li\u003e\n\u003cli\u003eWi-Fi Module: 2.4 GHz Wi-Fi (802.11 b\/g\/n)\u003c\/li\u003e\n\u003cli\u003eSupported OS: Windows 8, 10, 11\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdapters:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eeMMC 4-in-1 Adapter: FBGA-254, FBGA-162\/186, FBGA-153\/169 and FBGA-221\u003c\/li\u003e\n\u003cli\u003eUFS-FBGA-153 Adapter: 153-ball UFS packages\u003c\/li\u003e\n\u003cli\u003eUFS-FBGA-254 Adapter: 254-ball UFS packages\u003c\/li\u003e\n\u003cli\u003eUFS-FBGA-297 Adapter: 297-ball UFS packages\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVideos:\u003c\/strong\u003e\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/8AjeXQqHzbI\"\u003e\u003c\/iframe\u003e \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/OjJzlHqFfg8\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x Flash64 Ultra\u003c\/li\u003e\n\u003cli\u003e1 x eMMC 4-in-1 Adapter\u003c\/li\u003e\n\u003cli\u003e1 x UFS-FBGA-153 Adapter\u003c\/li\u003e\n\u003cli\u003e1 x UFS-FBGA-254 Adapter\u003c\/li\u003e\n\u003cli\u003e1 x UFS-FBGA-297 Adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":55071665389955,"sku":"f64u","price":999.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/f64u_00.jpg?v=1746186771"},{"product_id":"pack-of-50-small-hydrogel-protectors-180mm-x-120mm-clear","title":"Pack of 50 x Clear Hydrogel Screen Protectors for Mobile Phone 180mm x 120mm","description":"\u003cp\u003eThis pack of 50 small hydrogel sheets is specifically designed for use with screen protector cutting machines, allowing you to produce precise, custom-cut film protectors on demand. Each sheet measures 180mm x 120mm, providing the ideal size for loading into compatible cutting systems and creating accurate templates for a wide range of devices.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eManufactured from clear hydrogel material, these sheets deliver excellent transparency and smooth surface quality, ensuring a crystal-clear finished protector. Once cut and applied, the film maintains display brightness, colour accuracy, and full touch responsiveness without affecting screen sensitivity.\u003c\/p\u003e\n\u003cp\u003eThe flexible hydrogel construction is engineered for precision cutting. It feeds cleanly through cutting machines, allowing blades to create accurate outlines for smartphones, smartwatches, handheld consoles, GPS units, and other small electronic screens. The material conforms easily to flat and curved displays, including modern edge and 2.5D screen designs.\u003c\/p\u003e\n\u003cp\u003eHydrogel film offers reliable resistance against scratches, scuffs, and everyday wear. Its soft, impact-absorbing properties help reduce visible marks while maintaining a smooth, high-clarity finish. The material also supports bubble-minimising application for a professional end result.\u003c\/p\u003e\n\u003cp\u003eIdeal for repair shops, phone accessory retailers, market stalls, and service centres, this 50-pack ensures you have a consistent supply of ready-to-cut sheets for high-demand environments. Simply load the sheet into your cutting machine, select the required device template, and produce a perfectly sized screen protector in minutes.\u003c\/p\u003e\n\u003cp\u003eThese clear hydrogel sheets provide a practical, efficient, and cost-effective solution for businesses offering custom-cut film screen protectors on demand.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eCompatibility: Screen protector cutting machines and template-based film cutters\u003cbr\u003eMaterial: Clear hydrogel film\u003cbr\u003eWeight (per sheet): 0.03 kg\u003cbr\u003eDimensions (per sheet): 18 cm x 12 cm x 0.01 cm\u003cbr\u003ePack Weight: 1.50 kg\u003cbr\u003ePack Dimensions: 18 cm x 12 cm x 5 cm\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Content:\u003c\/strong\u003e\u003cbr\u003e1 x Pack of 50 Small Hydrogel Protectors 180mm x 120mm (Clear)\u003cbr\u003e\u003c\/p\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":57473174143363,"sku":"smallclearhg","price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/smallclearhg_new_03.jpg?v=1787753725"},{"product_id":"heat-mat-for-phone-repairs-workstation-large-controlled","title":"Heat Mat For Phone Repairs Workstation Large Controlled Hot Mat","description":"\u003cp\u003eThe Heat Mat is a next-generation heating solution specifically designed for smartphone and tablet repair. Unlike traditional metal heat plates, it features a non-metallic, scratch-free surface that ensures your devices remain safe while heating. Perfect for Phones, Tablets and other devices, it provides even and controlled heat to make screen or back cover removal faster, safer, and more efficient.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eDesigned for Adhesive Softening: Gently heats screens, back covers, and frames to soften glue and adhesive, making device disassembly safer and easier.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScratch-Free Surface: Non-metallic material prevents accidental scratches or damage during repairs.\u003c\/p\u003e\n\u003cp\u003eEnergy Efficient: Low power consumption saves electricity without compromising performance.\u003c\/p\u003e\n\u003cp\u003eFlat and Stable Design: Unlike raised heat plates, the Hot Mat keeps devices stable, reducing the risk of slipping or falling.\u003c\/p\u003e\n\u003cp\u003eRapid Heating and Cooling: Reaches working temperature in ~9 minutes and cools quickly for safe handling.\u003c\/p\u003e\n\u003cp\u003eAdjustable Temperature: Precise control from 10°C to 120°C (50°F to 248°F) for different repair needs.\u003c\/p\u003e\n\u003cp\u003eSmart Timer and Auto Shut-Off: Built-in countdown timer with automatic shut-off improves safety and convenience.\u003c\/p\u003e\n\u003cp\u003eOrganized Workspace: Includes 30 screw slots and 4 notches for ICs or small components to keep your workspace tidy.\u003c\/p\u003e\n\u003cp\u003eGlobal Voltage Compatibility: Supports 100V–240V AC for international use without a transformer.\u003c\/p\u003e\n\u003cp\u003eIntuitive Controls: High-definition LED display with simple buttons for temperature, timer, and device mode selection.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Use:\u003c\/strong\u003e\u003cbr\u003eSwitch Language: Long press [Down] to toggle English interface.\u003cbr\u003eSet Temperature: Press [M] until the temperature blinks, then adjust with [Up]\/[Down].\u003cbr\u003eSet Timer: Double-press [M], timer blinks, adjust with [Up]\/[Down].\u003cbr\u003eMobile Phone Mode: Long press [Power ON\/OFF] until a single beep.\u003cbr\u003eTablet Mode: Long press [M] until a double beep.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eSurface Material: Silicone, Non-metallic, anti-scratch\u003cbr\u003eInput Voltage: 100V–240V AC\u003cbr\u003ePower Output: Low power consumption\u003cbr\u003eHeating Time: ~9 minutes to 120°C\u003cbr\u003eTemperature Range: 10°C to 120°C (50°F to 248°F)\u003cbr\u003eAuto Timer: Adjustable countdown with auto shut-off\u003cbr\u003eControl Interface: LED screen with mode and timer buttons\u003cbr\u003eDimensions: 38cm x 22cm x 3.7cm\u003cbr\u003eExtras: 30 screw slots and 4 notches\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePackage Content:\u003c\/strong\u003e\u003cbr\u003e1 × Temperature Controlled Heat Mat for Repairs on Phones Tablets and other Devices\u003c\/p\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":57812271563139,"sku":"hotmat-ws-lrg","price":77.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/hotmat320_01.jpg?v=1771684524"},{"product_id":"vkps1","title":"Faraday Bag Signal Blocker VKPS1 - Phone Shield Security Pouch for Smartphones and Keyless Car Key Fobs","description":"\u003cp\u003e\u003cb\u003eVKPS1 Phone Shield \u0026amp; Keyless Car Key Faraday Bag - Dual‑Purpose Signal Blocking Pouch\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe VKPS1 is a compact Faraday bag designed for two essential security uses: protecting your phone data by blocking all wireless connectivity, and securing keyless car keys to prevent relay theft. When a device is placed inside, all signals are fully isolated.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eBlocks All Wireless Signals:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e- Mobile Networks (5G \/ 4G \/ 3G \/ GSM)\u003cbr\u003e- WiFi\u003cbr\u003e- Bluetooth\u003cbr\u003e- GPS \/ Location Tracking\u003cbr\u003e- NFC\u003cbr\u003e- RFID\u003cbr\u003e- Keyless Car Fob Signals\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eTwo Main Uses:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e1. Phone Protection\u003c\/b\u003e – Prevents tracking, hacking, remote access, and unwanted wireless communication.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e2. Keyless Car Key Security\u003c\/b\u003e – Stops thieves from amplifying your fob signal and carrying out relay attacks to unlock or steal your vehicle.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eHow to Use:\u003c\/b\u003e\u003cbr\u003e1. Place your phone or key fob inside the pouch\u003cbr\u003e2. Fold the top flap\u003cbr\u003e3. Secure the hook-and-loop closure\u003cbr\u003e4. Device is now fully shielded\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cbr\u003e- Completely isolates devices from all wireless communication\u003cbr\u003e- Helps prevent tracking, hacking, and remote wipe attempts\u003cbr\u003e- Durable canvas construction for everyday use\u003cbr\u003e- No-window design for maximum shielding performance\u003cbr\u003e- Fits large smartphones including Pro Max models\u003cbr\u003e- Holds 2 car key fobs comfortably (up to 3 tightly)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSuitable For:\u003c\/b\u003e\u003cbr\u003e- Privacy protection for smartphones\u003cbr\u003e- Professional repair, forensic, or secure environments\u003cbr\u003e- Preventing interference with Avalanche Transceivers\u003cbr\u003e- Stopping keyless entry relay crime\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFaraday bags help protect your devices from EMF, RFID, and other wireless-based attacks.\u003c\/p\u003e\n\u003cp\u003eKeep your keyless entry fobs safe by blocking the signal so thieves cannot remotely access your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e- Size: 22.5cm x 14cm external, 21cm x 12.5cm internal\u003cbr\u003e- Window: None\u003cbr\u003e- Strap: None\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003ePackage Includes:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e- 1 x VKPS1 Phone Shield \u0026amp; Car Key Faraday Bag\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eA simple and effective way to secure your phone data and protect your vehicle from relay crime.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProtects the iPhone 18 series.\u003c\/strong\u003e The iPhone 18, 18 Pro and 18 Pro Max all fit, along with the iPhone 17, 16 and 15 series and every other current smartphone. Once the phone is sealed inside, mobile signal, WiFi, Bluetooth, GPS and NFC are all blocked, so it cannot be tracked, called or remotely wiped.\u003c\/p\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":57846632776067,"sku":"vkps1","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/vkps1-phone.jpg?v=1784899997"},{"product_id":"middle-frame-deformation-corrector-tool-tbk-215b","title":"Frame Straightening Tool For Phone Repair TBK-215B 3-in-1 Corner, Edge and Chassis","description":"\u003cp\u003eTBK-215B middle frame repair kit for mobile phone and tablet bench work. The main fixture clamps the device frame on all four sides and applies controlled pressure through a micrometer-adjusted screw, so you can press a bent mid-frame back to flat without overshooting. The kit also includes dedicated attachments for corner and edge work, so the same setup handles dropped-corner dents and bent side rails - not only flat-face deformation.\u003c\/p\u003e\n\u003cp\u003eTypical uses on the bench:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlatten a warped mid-frame so the screen and battery sit properly again.\u003c\/li\u003e\n\u003cli\u003ePress a dented corner back into shape using the corner attachment.\u003c\/li\u003e\n\u003cli\u003eStraighten a bent edge or side rail with the edge straightening attachment.\u003c\/li\u003e\n\u003cli\u003eSquare the frame up before refitting the back glass, screen or battery after a heavy drop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-in-One Repair Kit:\u003c\/strong\u003e Main mid-frame press plus corner attachment plus edge straightening attachment in one fixture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Sided Clamping:\u003c\/strong\u003e All four edges are held in alignment while pressure is applied, so the correction is even rather than localised.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Repair Attachment:\u003c\/strong\u003e Dedicated jig for working dropped or deformed corners back into shape without bending the rest of the frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge Straightening:\u003c\/strong\u003e Side-rail attachment lets you press a bent edge straight without removing the frame from the main fixture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrometer Adjustment:\u003c\/strong\u003e Fine-thread adjustment applies pressure in small, controlled increments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Compatibility:\u003c\/strong\u003e Designed for the iPhone range plus other smartphones and tablets with metal mid-frames.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel: TBK-215B\u003c\/li\u003e\n\u003cli\u003eFunction: middle frame straightening, corner correction and edge straightening\u003c\/li\u003e\n\u003cli\u003eCompatibility: iPhone range and other smartphones \/ tablets with metal mid-frames\u003c\/li\u003e\n\u003cli\u003eAdjustment: micrometer-style fine thread\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 6.6 kg\u003c\/li\u003e\n\u003cli\u003eMaterial: steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e mobile phones and tablets with metal mid-frames. Most common use case is iPhone frame, corner and edge correction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x TBK-215B Main Frame Deformation Corrector Fixture\u003c\/li\u003e\n\u003cli\u003e1 x Corner Repair Attachment\u003c\/li\u003e\n\u003cli\u003e1 x Edge Straightening Attachment\u003c\/li\u003e\n\u003cli\u003e1 x Set of mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":58217354068355,"sku":"tbk215b","price":129.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/tbk215b_01.jpg?v=1781082911"},{"product_id":"mobile-phone-screen-disassembler-tool-rf-so3r","title":"Mobile Phone Screen Disassembler Tool RF-SO3R","description":"\u003cp\u003eRF-SO3R mobile phone screen disassembler - an adjustable-width clamp tool that grips the phone body while you lift the screen with the integrated suction cup. Designed as the primary screen-removal tool on a repair bench, fitting around 95 percent of common smartphone models on the market.\u003c\/p\u003e\n\u003cp\u003eThe jaws clamp the chassis with silicone buffers in contact with the frame and buttons, so the phone is held firmly without the side rails or volume \/ power keys getting scratched or pressed in. Movable suction-cup to let you swap which side you lift from, so you can always pull from the gap that gives way first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Adjustable Width:\u003c\/strong\u003e Clamp width adjusts to fit roughly 95 percent of smartphone models in regular use today.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilicone Buffers:\u003c\/strong\u003e The contact pads on the clamp jaws are silicone, so the phone frame and buttons are protected during clamping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Avoidance Grooves:\u003c\/strong\u003e Recessed grooves in the clamping surface clear the rear camera island, so the lenses are not pressed against the jaw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuction Cup:\u003c\/strong\u003e Movable suction cup so you can lift from whichever edge opens easiest.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Slip Grip:\u003c\/strong\u003e Holds the phone firmly during the lift without sliding out of the jaws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e most modern smartphones up to common flagship sizes. Verify your phone fits within the clamp range before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x RF-SO3R Mobile Phone Screen Disassembler Tool\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":58217355772291,"sku":"rf-s03r","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/rf-s03r_01.jpg?v=1781084036"},{"product_id":"jcid-dfu-cable-auto-recovery-tool","title":"JCID DFU Cable - Auto DFU Recovery Cable for iPhone, iPad and Mac","description":"\u003cp\u003eThe JCID DFU Cable is a repair accessory that places an idevice into DFU mode automatically during firmware flashing and system recovery. It removes the need for manual button combinations or device disassembly, letting a technician trigger DFU in a single step.\u003c\/p\u003e\n\u003cp\u003eEntering DFU mode by hand can be awkward and easy to mistime. This cable handles it for you and works whether the device is powered on, powered off or sitting on a locked screen, so the restore or flash can begin without a separate operational barrier.\u003c\/p\u003e\n\u003cp\u003eUsing it is straightforward: connect the cable to the device, connect the USB-A end to your computer, let the cable enter DFU mode, then start the flash or recovery from your software. The in-line module carries an 8-Pin connector and a USB-C connector for the device side, with status indicator lights to show the active mode.\u003c\/p\u003e\n\u003cp\u003eThe cable has a white finish with nickel-plated connectors and a compact in-line DFU module that is easy to keep on the bench or carry between jobs. The USB-A end plugs straight into a computer or repair station.\u003c\/p\u003e\n\u003cp\u003eCompatibility covers the iP 8 to 16 series, Pad Pro 2021, Mc Pro models A1990, A2141 and A1989, and the Mc mini M1 A2348. The iPhone 17 series and iPad Pro 2024 are not currently supported.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x JCID DFU Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":58342196773251,"sku":"jcdfu","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/jcdfu_01.jpg?v=1782556911"},{"product_id":"relife-rl-601px-pro-phone-frame-repair-tool","title":"Relife RL-601PX Pro Phone Frame Repair Tool Multi Directional And Corner Correction","description":"\u003cp\u003eThe Relife RL-601PX Pro is a dual-direction phone frame correction tool for straightening bent, warped or dented middle frames. Horizontal and vertical pressure work together so you can reshape flat-edge and curved full-frame damage that single-plane jigs struggle with, including common iPhone-style rounded-corner and curved-frame deformations.\u003c\/p\u003e\n\u003cp\u003eThe integrated multi-block design is ready to use out of the box. Swap between the pressure blocks for rounded corners, straight edges and general bending without needing a second fixture or extra accessories. That covers drop damage on iPhone-style rounded corners and Android flat-edge frames on one bench tool.\u003c\/p\u003e\n\u003cp\u003eThe widened base keeps the jig steady under load so pressure stays even across the frame and reduces the risk of tilting or shifting while you work. Expansion slots on both sides accept suction cups for assisted screen opening, so mid-frame reshaping and screen removal share the same fixture. A built-in slot stores the hex wrenches so accessories stay with the tool on the bench.\u003c\/p\u003e\n\u003cp\u003eUse it for mid-frame reshaping before screen or glass refit work. Product size is about 20cm x 12cm x 11cm, packed size about 23cm x 15cm x 7cm, shipping weight 1.1kg.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Relife RL-601PX Pro Frame Corrector\u003c\/li\u003e\n\u003cli\u003e2 x Hex Wrench\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":62297072304515,"sku":"601pxpro","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/EDA0099075_1.jpg?v=1785844107"},{"product_id":"a12-a13-usb-engineering-purple-screen-mode-module","title":"Aux USB Engineering Purple Screen Mode Unlock Module for iPhone A12 A13","description":"\u003cp\u003eThe A12\/A13 USB Unlock Module is a specialist phone-repair tool that boots Phones and Pads with A12 or A13 chips directly into Purple Screen Mode (also called Engineering Mode). This is the mode phone technicians need to run repair programs on a device whose USB port has been disabled by USB Restricted Mode - typically after multiple failed passcode attempts.\u003c\/p\u003e\n\u003cp\u003eOnce the phone is in Engineering \/ Purple Screen Mode, the technician can execute repair programs against the device while keeping the current iOS version intact. No downgrade, no restore, no data wipe - just a bench route back into a phone whose USB has locked itself down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow it works:\u003c\/strong\u003e The module has a USB-C input for a 5V power supply and a USB-A output that accepts the phone's own 8-Pin cable. Power the module from any USB-C phone charger or power bank, plug the phone's 8-Pin cable into the module's USB-A port, and the device boots into Purple Screen Mode ready for repair software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with A12 chip devices:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXR\u003c\/li\u003e\n\u003cli\u003eXS\u003c\/li\u003e\n\u003cli\u003eXS Max\u003c\/li\u003e\n\u003cli\u003ePad Mini 5\u003c\/li\u003e\n\u003cli\u003ePad Air 3\u003c\/li\u003e\n\u003cli\u003ePad 8 (2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with A13 chip devices:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e11\u003c\/li\u003e\n\u003cli\u003e11 Pro\u003c\/li\u003e\n\u003cli\u003e11 Pro Max\u003c\/li\u003e\n\u003cli\u003eSE 2020 (2nd gen)\u003c\/li\u003e\n\u003cli\u003ePad 9 (2021)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoots supported Phone \/ Pad models directly into Purple Screen Mode \/ Engineering Mode\u003c\/li\u003e\n\u003cli\u003eBypasses USB Restricted Mode on locked A12 \/ A13 devices for repair access\u003c\/li\u003e\n\u003cli\u003eRetains the current iOS version - no downgrade required\u003c\/li\u003e\n\u003cli\u003eUSB-C power input, USB-A output to accept the phone's 8-Pin cable\u003c\/li\u003e\n\u003cli\u003eBOOT and RST buttons plus 3.3V \/ 5V \/ GND \/ GPIO headers for advanced use\u003c\/li\u003e\n\u003cli\u003eCompact bench module - runs from any USB-C phone charger or power bank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Professional phone-repair tool. Sold for legitimate repair use on devices you own or are authorised to service. Not compatible with 12 series or later (A14+ chips) or with any  A11 or earlier chip.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Aux USB Engineering \/ Purple Screen Mode Unlock Module for iPhone A12 A13\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":62410717069699,"sku":"auxusba12a13","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/auxusba12a13_01.jpg?v=1787059142"},{"product_id":"qianli-middle-layer-reballing-station-iphone-17","title":"QianLi Middle Layer Reballing Station With 3 Stencils For iPhone 17 Series","description":"\u003cp\u003eThe QianLi Middle Layer Reballing Station is a professional reballing fixture designed specifically for the stacked, dual-layer logic boards found in the iPhone 17, iPhone 17 Pro and iPhone 17 Pro Max. Modern iPhone main boards are built as two PCBs soldered together; when a board fault requires them to be separated for repair, both layers must be precisely reballed before they can be rejoined. This single fixture holds the board securely and works across all three iPhone 17 models.\u003c\/p\u003e\u003cp\u003eSupplied with three individual reballing stencils - one matched to each iPhone 17 logic board layout - the station lets you apply a fresh, perfectly aligned array of solder balls to the middle-layer pads. The one universal fixture accepts all three boards, so there is no need to buy a separate platform for every model. The heat-resistant base withstands hot-air rework and BGA reballing temperatures, keeping the board flat and stable throughout the process.\u003c\/p\u003e\u003cp\u003eIdeal for micro-soldering and board-level repair technicians, the kit makes light work of re-tinning and reballing separated iPhone 17-series boards ready for stacking and rejoining. In the box: 1 x QianLi middle-layer reballing station fixture and 3 x reballing stencils (iPhone 17 \/ 17 Pro \/ 17 Pro Max). A must-have for any professional Apple logic board repair workshop.\u003c\/p\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":62434235351427,"sku":"rbstat17","price":33.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/rbstat17-000.jpg?v=1787398690"},{"product_id":"qianli-isocket-test-fixture-iphone-17","title":"QianLi iSocket Middle Layer Logicboard Test Fixture for iPhone 17 Series","description":"\u003cp\u003eThe QianLi iSocket for the iPhone 17 series is a 4-in-1 layered motherboard test fixture that lets you power up and test a stacked iPhone logic board on the bench - without soldering the layers back together. It covers all four models in the range (iPhone 17, iPhone 17 Air, iPhone 17 Pro and iPhone 17 Pro Max) from a single base, using a set of four interchangeable pinboards, one matched to each models board layout.\u003c\/p\u003e\u003cp\u003eModern iPhone main boards are built as two PCBs stacked on top of each other. After a board-level fault repair, this fixture holds the upper and lower sections together and makes contact with the test points so you can supply power and a display and confirm the board is working BEFORE you commit to permanently re-soldering it. Test first, solder once - saving the time and risk of soldering, testing, and having to separate the board all over again if the fault is not fixed.\u003c\/p\u003e\u003cp\u003ePrecision matters on layered boards, so the iSocket is CNC-machined to tight tolerances. Double-headed, tapered probes align cleanly with the boards test points for reliable contact and accurate readings, and resist rosin and solder build-up. Beryllium-copper (BeCu) spring probes give excellent conductivity and stable, low-deviation contact, while fixed buckles clamp the board flat to stop it warping during testing. A quick-rebound spring mechanism makes loading and unloading fast, and rubber anti-slip feet keep the fixture planted on the bench.\u003c\/p\u003e\u003cp\u003eIn the box: 1 x iSocket test platform base and 4 x interchangeable pinboards (iPhone 17 \/ 17 Air \/ 17 Pro \/ 17 Pro Max). To use, seat the lower motherboard on the base, fit the correct model pinboard, position the upper board, secure it with the wings, then connect power and a display to test. An essential bench tool for professional board-level Apple repair - pair it with a QianLi middle-layer reballing station for the full separate-reball-test-rejoin workflow.\u003c\/p\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":62434816360835,"sku":"isocket17","price":251.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/5474dc37b4ed811fc390a3a8f7039592.jpg?v=1787333319"},{"product_id":"jtxtools-ir-3-short-circuit-finder-pad-motherboard","title":"IR-3 Short Circuit Finder Pad For Motherboard JTXTOOLS","description":"\u003cp\u003eThe JTXTOOLS IR-3 is a thermochromic short circuit finder pad for phone and electronics motherboard work. Place the flexible sheet over the board, apply current, and watch for a colour change where heat leaks - that white or bright mark shows the hot spot so you can see which component needs attention.\u003c\/p\u003e\n\u003cp\u003eIt is designed as a reusable diagnostic accessory that sits flush over components. The soft silicone-style sheet is about 0.5mm thick, bends to follow board contours, and stays clear enough to keep the layout visible while you work.\u003c\/p\u003e\n\u003cp\u003eCompared with melting rosin on a board or setting up a thermal imager, the IR-3 needs no focusing or calibration. Colour response starts around 35C, helping techs locate short circuit heat sources quickly without smoke or residue on the workbench.\u003c\/p\u003e\n\u003cp\u003eSuitable for mobile phone logic boards and similar mainboards in a repair workshop. Patented IR-3 design from JTXTOOLS (JITONGXUE). Ships in retail packaging ready for bench use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThermochromic sheet highlights heat leakage and short circuit hot spots\u003c\/li\u003e\n\u003cli\u003eFlexible 0.5mm pad sits closely over motherboard components\u003c\/li\u003e\n\u003cli\u003eColour change around 35C for clear visual feedback\u003c\/li\u003e\n\u003cli\u003eReusable, smokeless alternative to rosin heat tests\u003c\/li\u003e\n\u003cli\u003eNo focusing or calibration - attach and apply current\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x JTXTOOLS IR-3 Short Circuit Finder Pad\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":62619626406275,"sku":"jtx-ir3","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/det08.png?v=1789713073"}],"url":"https:\/\/www.fonefunshop.com\/collections\/hot-picks.oembed","provider":"FoneFunShop","version":"1.0","type":"link"}