{"product_id":"mipitester-ultra-box-full-kit-ufs-bga153-bga254-bga297-emmc-ufs-isp","title":"MiPiTester Ultra Box Full Kit with 3 Sockets For UFS-BGA153, UFS-BGA254, UFS-BGA297 with MiPi EMMC \u0026 UFS ISP Adapter","description":"\u003cp\u003eThe MiPiTester Ultra Box Full Kit is an FPGA-based UFS and eMMC programmer bundle for mobile forensics and physical data recovery. It pairs the MiPi Ultra box with three ICFriend UFS sockets (BGA153, BGA254 and BGA297) and an ICFriend eMMC\/UFS ISP adapter with UFS and eMMC ISP cable kits, so storage can be accessed either in-circuit on the board or directly after chip-off.\u003c\/p\u003e\n\u003cp\u003eFor ISP (in-system programming) extraction, the ISP adapter and flex cables are soldered to the ISP pinouts on the phone's logic board. This lets you read and write the UFS or eMMC storage without removing the chip - useful when a handset is dead, will not boot, or has a damaged screen or housing but the data on it still needs to be recovered.\u003c\/p\u003e\n\u003cp\u003eFor chip-off work, the three sockets take UFS chips in BGA153, BGA254 and BGA297 packages once they have been removed from the board, so the chip can be read or written directly. Three black socket shims (limit frames) are also supplied with the kit.\u003c\/p\u003e\n\u003cp\u003eThe supplier specifies read and write speeds of up to 380 MB\/s over USB 3.0, with support for mainstream eMMC and UFS chips including Samsung, SK Hynix and Micron. The software includes an online HEX editor and a built-in Linux file manager for editing blocks directly, without reading or writing the whole storage. A Windows 10 or 11 PC with an NVMe SSD is required.\u003c\/p\u003e\n\u003cp\u003eThe kit is aimed at digital forensic units, law enforcement labs, data recovery specialists and phone shops offering data recovery from damaged or dead smartphones. According to the supplier it can also be used on boot loop, dead boot and system partition faults, and on car navigation and drone flash storage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFPGA-based MiPiTester Ultra programmer for UFS and eMMC storage\u003c\/li\u003e\n\u003cli\u003eRead and write speeds of up to 380 MB\/s via USB 3.0 (supplier specification)\u003c\/li\u003e\n\u003cli\u003eICFriend sockets for UFS BGA153, BGA254 and BGA297 chips for chip-off reading and writing\u003c\/li\u003e\n\u003cli\u003eICFriend eMMC\/UFS ISP adapter with USB-C connection for in-circuit access via ISP pinouts\u003c\/li\u003e\n\u003cli\u003eSeparate UFS and eMMC ISP flex cables, each with a USB adapter board and three flex adapter boards\u003c\/li\u003e\n\u003cli\u003eOnline HEX editor and built-in Linux file manager for direct block-level editing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUFS chips in BGA153, BGA254 and BGA297 packages (sockets)\u003c\/li\u003e\n\u003cli\u003eUFS and eMMC devices with accessible ISP pinouts (ISP adapter and cables)\u003c\/li\u003e\n\u003cli\u003eRequires a Windows 10 or 11 PC with an NVMe SSD and a USB 3.0 port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x MiPiTester MiPi Ultra Box\u003c\/li\u003e\n\u003cli\u003e1 x ICFriend NB-UFS-BGA153 Socket Adapter\u003c\/li\u003e\n\u003cli\u003e1 x ICFriend NB-UFS-BGA254 Socket Adapter\u003c\/li\u003e\n\u003cli\u003e1 x ICFriend NB-UFS-BGA297 Socket Adapter\u003c\/li\u003e\n\u003cli\u003e1 x ICFriend eMMC UFS ISP Adapter\u003c\/li\u003e\n\u003cli\u003e1 x ICFriend UFS ISP Cable with USB adapter board and 3 flex adapter boards\u003c\/li\u003e\n\u003cli\u003e1 x ICFriend eMMC ISP Cable with USB adapter board and 3 flex adapter boards\u003c\/li\u003e\n\u003cli\u003e3 x Socket Shims (Limit Frames)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSoftware and Downloads:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMiPiTester Plus and Ultra software\u003c\/strong\u003e, current release \u003cstrong\u003e1.16.2026\u003c\/strong\u003e. This is the one to use with this kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMiPiTester Pro MINI and old box\u003c\/strong\u003e, release V3.13 with firmware 10405. Not needed for the Ultra.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrosoft Visual C++ Redistributable\u003c\/strong\u003e, needed on Windows 7 and Windows 10. Install \u003cstrong\u003eVC_redist.x86.exe\u003c\/strong\u003e before the MiPiTester software. Download it free from Microsoft at \u003ca href=\"https:\/\/aka.ms\/vs\/17\/release\/vc_redist.x86.exe\" rel=\"nofollow\"\u003eaka.ms\/vs\/17\/release\/vc_redist.x86.exe\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eThe manufacturer ICFriend keeps the latest software here: \u003ca href=\"https:\/\/www.icfriend.com\" target=\"_blank\" rel=\"nofollow noopener\"\u003eicfriend.com\u003c\/a\u003e. Always check there for a newer release than the one you have.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInstalling the software:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eOn Windows 7 or Windows 10, install \u003cstrong\u003eVC_redist.x86.exe\u003c\/strong\u003e first. Windows 11 normally already has it.\u003c\/li\u003e\n\u003cli\u003eRun the MiPiTester setup file and let it finish.\u003c\/li\u003e\n\u003cli\u003ePlug the box into a \u003cstrong\u003eUSB 3.0 port on the computer motherboard itself\u003c\/strong\u003e, not a hub and not a front panel extension. The box draws its power from that port.\u003c\/li\u003e\n\u003cli\u003eIf you only have USB 2.0, the port cannot supply enough current. You must power the box from an \u003cstrong\u003eexternal 5V charger\u003c\/strong\u003e as well.\u003c\/li\u003e\n\u003cli\u003eOpen Device Manager and check the \u003cstrong\u003eMiPiTester driver\u003c\/strong\u003e is listed. If it is there, the box is connected and ready.\u003c\/li\u003e\n\u003cli\u003eIf the software will not read the partition table, close it and \u003cstrong\u003erun it as Administrator\u003c\/strong\u003e. That is almost always the cause.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eUsing the NB universal sockets:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMind the \u003cstrong\u003eIC direction\u003c\/strong\u003e when you seat a chip. Line the chip up with the marking on the socket interface, do not guess it.\u003c\/li\u003e\n\u003cli\u003eSocket sizes: \u003cstrong\u003eMP11.5x13A\u003c\/strong\u003e covers \u003cstrong\u003eBGA297\u003c\/strong\u003e, and the same family covers \u003cstrong\u003eBGA153\u003c\/strong\u003e and \u003cstrong\u003eBGA254\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eUse the matching \u003cstrong\u003esocket shim\u003c\/strong\u003e (limit frame) for the chip you are reading. Three are supplied with this kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTo add UFS ISP support to an NB socket\u003c\/strong\u003e, the board needs modifying: remove \u003cstrong\u003eR80\u003c\/strong\u003e and \u003cstrong\u003eR82\u003c\/strong\u003e, and replace \u003cstrong\u003eR79\u003c\/strong\u003e and \u003cstrong\u003eR81\u003c\/strong\u003e with \u003cstrong\u003e0 ohm\u003c\/strong\u003e links. The socket supports UFS ISP once that is done.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eISP work and getting support:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor ISP, the adapter and flex cables solder to the ISP pads on the phone board, so the storage can be read without taking the chip off.\u003c\/li\u003e\n\u003cli\u003eIf you need help from the manufacturer with an ISP job, they ask for \u003cstrong\u003eclear, high resolution photos\u003c\/strong\u003e of the board, the ISP points and your wiring before they will answer. Blurry photos get no reply.\u003c\/li\u003e\n\u003cli\u003eICFriend support: WhatsApp \u003cstrong\u003e+86 139 2466 6918\u003c\/strong\u003e, Telegram \u003ca href=\"https:\/\/t.me\/mipi_icfriend\" target=\"_blank\" rel=\"nofollow noopener\"\u003et.me\/mipi_icfriend\u003c\/a\u003e, or \u003ca href=\"https:\/\/www.facebook.com\/mipitester\" target=\"_blank\" rel=\"nofollow noopener\"\u003efacebook.com\/mipitester\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FoneFunShop","offers":[{"title":"Default Title","offer_id":62763609850243,"sku":"mipiultrafull","price":699.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0868\/8982\/4537\/files\/01-hero-full-kit_4ec6a65f-89f1-4046-9e98-61633f06012c.jpg?v=1791464314","url":"https:\/\/www.fonefunshop.com\/products\/mipitester-ultra-box-full-kit-ufs-bga153-bga254-bga297-emmc-ufs-isp","provider":"FoneFunShop","version":"1.0","type":"link"}