Back Cover Adhesive For Google Pixel 10a Rear Glass Bonding Strip

This back cover adhesive is a die-cut bonding strip made for the Google Pixel 10a. It seals the rear glass back onto the phone frame after the back has been removed.

Opening the back of a phone for a battery, wireless charging or camera job breaks the factory adhesive, and the rear glass will lift or rattle if it goes back on without a fresh strip. A pre-shaped adhesive takes the guesswork out of resealing, with no cutting or trimming tape to size.

The strip follows the outline of the Google Pixel 10a rear panel, with the opening for the camera area, so it lines up with the frame first time. Peel the backing, place it on the clean frame, remove the top liner and press the back cover down firmly.

Remove every trace of the old adhesive with isopropyl alcohol and let the frame dry fully before fitting. Hold the back under gentle, even pressure for a few minutes for the best bond.

Made for the Google Pixel 10a only. Other Pixel models use a different shape, so please check your model before ordering.

Package Contents:

• 1 x Back Cover Adhesive For Google Pixel 10a