Screen Adhesive For iPhone 18 Pro Display Bonding Glue Strip Gasket Seal

A pre-cut screen adhesive gasket for the iPhone 18 Pro, used to bond the display back into the frame after a screen replacement or any repair that needs the display lifted. The seal is die cut to the outline of this model, so it follows the edge of the frame without any trimming.

Once a display has been taken off, the original adhesive is stretched and contaminated and will not hold a second time. Refitting the screen on old adhesive leaves gaps along the edge that let dust and moisture in, and the display can lift at a corner. A fresh gasket restores an even bond all the way round and helps pull the display down flush with the frame.

This gasket fits the iPhone 18 Pro front screen. With the display out it is also worth checking the plastic frame around the screen for cracks before refitting, as a damaged frame will not sit flush on the new gasket.

The gasket comes on peel-off liners. Scrape away all of the old adhesive and clean the frame with isopropyl alcohol, lay the gasket on the frame, remove the liners, then seat the display and press evenly around the edge. No phone can be guaranteed water resistant once it has been opened, so avoid exposing a repaired phone to water.

Features:

• Perfect Fit: Die cut to the display outline of the iPhone 18 Pro.
• Even Bond: Holds the display flush to the frame all the way round.
• Dust and Moisture Barrier: Seals the gap between the screen and the housing.
• Clean Fitting: Peel-and-stick, no liquid glue and no curing time.
• Cost-Effective: One gasket is needed every time the display comes off.

Compatibility:
iPhone 18 Pro only. Not compatible with other iPhone models.

Package Contents:

• 1 x Screen Adhesive For iPhone 18 Pro