Jtag Boxs
JTAG Box's allow you to repair phones which aare dead / not booting. thay allow you to reprogram the boot chip on the phone.
JTAG and eMMC Forensics is becoming commonly used to extract important data direct from the phones memory.
Using JTAG (Joint Test Action Group) extraction techniques will allow you to perform memory dumps of Android and Windows Phone devices.
Recover swipe patterns, PIN codes and passwords from memory dumps of Android devices and in many cases recover live and deleted data from memory dumps too.
-
-
New!
Z3X Easy-JTAG Plus is an innovative all in one service tool for phone and phone boot repair, data recovery.
SPI memory programming and many other features.
Supports eMMC, ISP, JTAG, SPI, NAND, UFS and many more protocols.
This FULL version comes packaged with eMMC Socket.
Note: UFS sockets are not included but are available separately (compatible with IC Friend).
-
-
-
New!
Medusa II Box is a powerful yet affordable programmer for reading/writing flash memory and phone data recovery.
It is intended for servicing most Android brands via UART, USB JTAG, and MMC interfaces.
This Basic set comes without BGA adapters / sockets, but is fully compatible with E-Mate X adapters if you require chip sockets.
The main intended purpose of Medusa II Box is to repair dead boots of the devices (mobile phones, PDAs, modems, etc.) or these devices recovery, until they become fully operational.
Medusa II Box software is a Windows application for Medusa II Box, that provides a convenient interface for end users.
-
-
-
New!
Medusa Box II is a powerful yet affordable programmer for reading/writing flash memory and phone data recovery. It is intended for servicing most Android brands via UART, USB JTAG, and MMC interfaces.
This Medusa Box 2 (aka Medusa II Box) FULL SET includes BGA adapters / sockets so you can read / write to the supported eMMC chips directly, as well as via ISP using VR Table style techniques and soldering the supplied wite directly to the pin outs on the phones logic board without need to remove the chip.
Medusa II Box is a professional phone servicing tool that allows you to work with a wide range of Samsung, Huawei, LG, Motorola, Siemens, Sony Ericsson, Vodafone, ZTE, and other mobile devices through JTAG, USB, and MMC interfaces.
The main intended purpose of Medusa II Box is to repair dead boots of the devices (mobile phones, PDAs, modems, etc.) or these devices recovery, until they become fully operational.
Medusa II Box software is a Windows application for Medusa II Box, that provides a convenient interface for end users. It uses the Medusa Pro Software
-
-
Full Support LCD TV FLASH drivers read and write unlimited capacity TSOP48 nand FLASH EMMC TSOP56 pin TOP8-16 pin Support CAR DVD, SMART TV.
The Only universal programmer which can automatically detect chip number for all Chips.
The only universal programmer which can put ic in any position and make intelligent sense.
The Only universal programmer Support Read and program Laptop I/O via keyboard line.
-
✅ Wikitech UFS is dedicated UFS Programmer for chip-off solutions
✅ Wikitech can access to all LUNs of the UFS IC which makes UFS Data recovery seamlessly integrated all in one solution.
✅ Wikitech is Compliant with USB v3.1 Gen 1, which supports UASP and UFS v2.1, which supports HS-Gear3.
✅ Support IC with or without solder ball. Hassle free operations for UFS chip-off.
✅ It comes complete with both the UFS 254 and UFS 153 IC sockets.
-
This package includes Multiple Tools & Accessories For eMMC Jtag / iSP / Chip Off Reading
This kit has been compiled to enable the user to Directly connect to the eMMC chip on devices such as phones, tablets and tomtom while still attached to the device logic board. This method enables you to forensically extract data from the device memory chip not normally accessable by conventional cable methods.
-
Finally it is available to buy and use from any country!
UFI Box WORLDWIDE EDITION
UFi Box Worldwide Edition works from all countries around the world, unlike the previous edition which would only work in Indonesia, unless you operated it behind a VPN.
UFI Box is a is a powerful EMMC Service Tool that can Read EMMC user data, as well as repair, resize, format, erase, read write and update firmware on EMMC in Samsung, china phone skhynix, toshiba, kingston, micron, and other brands.
-
The UP-828P Series programmer is a high-speed universal programmer designed for flash memory developers.
The UP-828P Ultra fast universal programmer allows examiners to acquire data efficiently.
Data can be acquired from various types of flash memory, such as NOR FLASH, NAND FLASH, SERIAL FLASH, GB-NAND, OneNAND, MoviNAND, iNAND, eMMC, eMCP, and SD memory card.
Adapters required for use with the programmer are not included but can be purchased separately.
Optional Adapters available HERE
