Search

This Activation is for Z3X Jtag or LG Box's that would like to add Samsung Activation to their box.

This Z3X Samung Activation is ideal for anyone who has purchased a z3x jtag box or z3x lg box and want to add Samsung to it.

This Activation is for Z3X Jtag or Samsung Box's that would like to add LG  Activation to their box.

This Z3X LG Activation is ideal for anyone who has purchased a z3x jtag box or z3x Samsung box and want to add LG to it.

Mediatek Chipset Compatibility: Designed for phones and tablets based on Mediatek chipsets.

High-Definition Monitor Optimization: Software optimized for use with high-definition monitors.

User-Friendly Interface: Intuitive and easy-to-navigate user interface.

Auto Update Algorithms: Software automatically updates to stay current.

Extensive Flash File Support: Access to a vast collection of flash files for various vendors.

This UPGRADE is only for people who already have a samsung activation on their Z3x Box.

This Z3X Samung Pro Activation is required for older samsung box users to upgrade to the new Z3X Samsung Pro. It is only needed for Z3X Samsung Box owners who purchased their box before 20/07/2014.

PRE-Activated to use Samsung Pro Software Module (lifetime activation)

Supports a variety of operations

Comes with a User Interface

Comes with Software

Has a High-Speed USB Connection

✅ DESIGN - This cable is designed to give a simple and clean look
✅ COMPATIBILITY - This will replace your original damaged cable
✅ CONFIDENT GRIP - Lightweight and ultra slim design without the bulky feel
✅ HIGH QUALITY - Each cable is tested before shipment
✅ MATERIAL - Made from strong insulated wire with hard plastic around the connections

Z3X Easy-JTAG Plus is an innovative all in one service tool for phone and phone boot repair, data recovery.

SPI memory programming and many other features.

Supports eMMC, ISP, JTAG, SPI, NAND, UFS and many more protocols.

This FULL version comes packaged with eMMC Socket.

Note: UFS sockets are not included but are available separately (compatible with IC Friend).

This special micro UART auto ignition cable for Z3x users is needed for Samsung boot repair, and Uart connections on newer phones hen flashing to enable ADB for FRP etc. without Test Points or J-TAG. This is a very new technology supporting easy repair of many Samsung boots included in Samsung 2G Tool 3.4.0065 Update. S7070, M3710, S5560, B3410W boot repair solution.

This cable continues to support newer models like galaxy S1,S2,S3,S4,S5,S6,S7 Utilising it's 525K resistor

The EDL 2 in 1 cable supports both USB Type C and MicroUSB connectivity. It is used on all Qualcomm phones to put phone into DEEP FLASH MODE, also known as Qualcomm 9008 Mode / Emergency Download Mode. For Working With Z3x Box / Octopus Box etc. This cable help you to Flash, unlock, read pattern lock for all kind of Qualcomm phones including Samsung, Sony, LG etc.  

✅ The Miracle EDL Deep Flash Mode 9008 Cable supports both USB Type C and MicroUSB connectivity.
✅ It is used on all Qualcomm phones to put phone into DEEP FLASH MODE, also known as Qualcomm 9008 Mode / Emergency Download Mode
✅ For Working With Miracle Thunder Dongle / Inferno Key Dongle / FRP Dongle / Z3x Box / Octopus Box etc
✅ This cable help you to Flash, read pattern lock for all kind of Qualcomm phones including Samsung, Sony, LG etc.
✅ Made from strong insulated wire with hard plastic around the connections

Moorc E-Mate X 13in1 - ICFriend Edition is the latest version of a set of adapters allowing for direct eMMC memory connection and read and/or write it contest. Perfect for mobile forensic physical memory dump. 

The E-mate X 13 in 1 adapter supports reading and writing of eMMC chips including BGA100, BGA136, BGA168, BGA153, BGA169, BGA162, BGA186, BGA221, BGA529, BGA254.

Compatible With Easy Jtag Plus, Easy Jtag, Riff Box 2, eMMC Pro Box, eMMC Pro Booster, Medusa Pro, UFI Box, Medusa Pro.

Direct or indirect connection of eMMC memory and execution of reading and writing. Adapters are used to program eMMC memory chips in phones without soldering - which definitely affects the recovery process.

The new version in comparison to the 2017 edition allows in addition to previously supported pinouts also reading the latest eMMCs BGA254, BGA100, BGA136, BGA168.

ICFRIEND 4 in 1 UFS Chip Reader Set is designed specifically for compatibility with Z3X Easy JTAG Plus Box, facilitating seamless reading and writing of data on the latest UFS chipsets.

This set supports various UFS chipsets including BGA153, BGA254, and BGA297, catering to a wide range of device configurations and ensuring comprehensive compatibility.

Specifically, the supported UFS 4.0 BGA153 chipset enhances the versatility of the set, enabling users to work with the most recent advancements in UFS technology.

The package includes essential components such as the ICFRIEND UFS Adapter, UFS BGA254 / BGA153 / BGA297 Socket, and Emmc ISP Adaptor, providing users with the necessary tools for efficient chip reading and writing tasks.

With its comprehensive chipset support and included adapters, the ICFRIEND 4 in 1 UFS Chip Reader Set offers a convenient and versatile solution for professionals and enthusiasts engaged in device maintenance and repair.

You can change the Values 1 Ohm to 1 Mega ohms and easy solder the pinouts VCC,RX,TX,GND. supports all kind of service boxes including infinity, z3x, ustpro, vygis, octopus, ufs/hwk, nspro etc.

The Harmony USB Test Point Cable a special USB Type-C cable that allows the phone to enter the USB COM 1.0 service mode.

This is needed for smartphones that are based on Kirin 710 / 710A / 710F, 810/820, 980/985, 990/990 5G systems, which are using and updated to the latest HarmonyOS / updated to the latest SPL.

For example phone the new P30 PRO, etc. Without this cable, putting the phone into low-level mode (USB COM 1.0) is not possible and therefore no service operation can be performed.

Compatible with service software that supports Kirin based phones including Chimera Tool, Z3X Box, Octopus Box, Octoplus Box, Furious etc..

Package Contents: 1 x Harmony Testpoint Cable (colour and style may vary)

This 5 in 1 JTAG ISP adapter can be used with existing JTAG EMMC tools including ATF, Riff, Medusa etc.

In this training course, we specialise in teaching you how to use your Pro Unlocking Equipment (Box / Dongle)

The course is a one-2-one placement, so you will have the undivided attention of our engineers