MaAnt
MaAnt CJ-1 Pro Electric Adhesive Remover for Phone Screen Repair
MaAnt CJ-1 Pro Electric Adhesive Remover for Phone Screen Repair
- Cleans spent adhesive off the chassis and old screen adhesive off the frame, so a new screen goes on to a clean flat surface with fresh adhesive.
- 9 speed power adjustment with a lit digital display, wind it down for delicate edges and up for heavy glue.
- Forward and reverse rotation with a button each, 2000mAh battery charged over USB-C and up to 5 hours of running.
- Swap the brass collet for the cutting disc or polishing heads and use the same tool for de-gumming, cutting and grinding.
9 in stock
Couldn't load pickup availability
Share
If you replace phone screens, the MaAnt CJ-1 Pro is a must-have tool for your bench. Its main job is cleaning the old screen adhesive and glue off phone frames and bezels before the new screen goes on. The bezel on a modern phone is very thin, so the new adhesive only has a narrow strip to grip. Any old adhesive left behind stops it making full contact, and the new screen will not bond properly. The CJ-1 Pro's spinning needle takes the residue off in a controlled line right up to the edge of the frame, leaving a clean, flat, old-adhesive-free surface so the new adhesive makes full contact and the screen seats and bonds properly first time. It is precise enough to work along a lip without gouging it, and far quicker than scraping by hand with a pick.
Key Features:
- Must-have for screen replacements: cleans old adhesive and glue off thin phone bezels and frames, leaving a clean, flat surface so the new adhesive gets full contact and bonds properly
- Secondary use: removes OCA glue from LCD and OLED screens for recycling, refurbishing and fitting new glass
- 9 speed power adjustment with a lit digital display, so you can slow down for delicate edges and speed up for heavier glue
- Forward and reverse rotation, each with its own one touch button
- 2000mAh battery, charged over USB-C at 5V 700mA, runs the motor for up to 5 hours
- Brass collet releases with the supplied allen key to swap between glue removal needles, cutting disc and polishing heads in seconds
This is the Pro version of the CJ-1. Rated at 6W, 120mm long and 146g in the hand, it is small enough to work with like a pen, and the same tool handles de-gumming, cutting and grinding. Suited to repair shops and home hobbyists alike.
It also earns its place for LCD recycling. After the glass has come off an LCD or OLED, the spinning needle lifts the OCA, hard rubber and original factory adhesive left on the panel, including around curved edges where hand rubbing usually goes wrong, so the screen can be cleaned up for recycling or refurbishing and fitted with new glass.
Specifications:
- Brand: MaAnt
- Model: CJ-1 Pro
- Rated power: 6W
- Battery: 2000mAh, charged over USB-C at 5V 700mA
- Continuous motor running time: up to 5 hours
- Speed settings: 9, with digital display
- Rotation: forward and reverse, one button each
- Product size: 120 x 36 x 36 mm
- Net weight: 146g, gross weight 195g
Package Contents:
- 1 x MaAnt CJ-1 Pro electric glue remover
- 1 x brass collet chuck
- 3 x glue removal needles
- 1 x cutting disc
- 2 x polishing heads
- 1 x allen key
Product Information:
SKU: cj1pro
Material: Aluminium
Weight: 0.195kg
Colour: Grey
Item Dimensions (L x W x H): 16.5cm x 7.5cm x 4cm
Shipping Information:
Package Dimensions (L x W x H): 17cm x 8cm x 4cm
Ships From: United Kingdom
Country / Region of Manufacture: United Kingdom