FoneFunShop
Mechanic 10ML GY UVH900 Green UV Curable Solder Mask Paint For PCB Jumper Wire
Mechanic 10ML GY UVH900 Green UV Curable Solder Mask Paint For PCB Jumper Wire
✅ Insulates printed circuit board against shorting and arcing.
✅ This paint is used to protect PCB traces from corrosion & moisture.
It requires a UV light to cure the paint.
✅ Used for repairing PCB after soldering and rework.
✅ Used for shielding jumper wire after micro-soldering work.
✅ Recommended for protection on mobile phone logic boards.
29 in stock
Couldn't load pickup availability
Share
Insulates printed circuit board against shorting and arcing.
This paint is used to protect PCB traces from corrosion & moisture. It requires a UV light to cure the paint.
Used for repairing PCB after soldering and rework.
Used for shielding jumper wire after micro-soldering work.
Recommended for protection on mobile phone logic boards.
Specifications:
Color: Green
Syringe Length: Approx. 10 cm
Material: Paint
Model: GY-UVH900
Usage:
Apply paint on your PCB.
Spread it on the PCB with covering the transparent mask film.
Expose it under UV light ( or sun ) for a few minutes.
Wash away the extra paint by gasoline or oil base solvent.
Package Contents:
1 x 10ml UV Green Paint
Product Information:
SKU: greenoil10ml
Material: Paint
Weight: 0.02kg
Colour: Green
Item Dimensions (L x W x H): n/a
Shipping Information:
Package Dimensions (L x W x H): 10cm x 2 x 2cm
Ships From: United Kingdom
Country / Region of Manufacture: United Kingdom
Product fine, does the job as intended.Did not arrive by the selected prime delivery date.Sellers shipping info innacurate - states that royal mail will be used, actually came via Evri and I would not have ordered from here if I knew they used one of the least reliable couriers in the UK.
This product is a bit of a let down, the advertising has failed to make clear that a plunger + tip is NOT included, as of present this isn’t clear to a buyer and seems like an unnecessary cost cutter that puts pointless hassle on the buyer for such a cheap necessity so the item can function, the ease of use is therefore extremely limited if you don’t have a plunger and a tip yourself, i can see how this would be majorly inconvenient to a customer since you need one to properly use the solder mask. Other than that it works as expected.
No, It doesn't come with a plunger, just like when you buy decorators calk or sealant, they don't come with a gun. If you need a plunger check our other items like tube mate.
Does its job well 30 sec under a uv curing lamp and your all set to go no excess residue and hard as a rock once set
Good stuff does its job by mechanic.
Works well recommend