Rear Panel Adhesive For iPhone 18 Pro Bonding Glue Strip For Back Glass Repair

A pre-cut rear panel adhesive strip for the iPhone 18 Pro, used to bond the back glass to the frame once it has been taken off. The gasket is die cut to the outline of this model, so it follows the camera cut-out and the edge of the chassis without any trimming.

Once an original back panel has been lifted the factory adhesive is stretched and contaminated, and it will not hold a second time. Re-seating the glass on old adhesive leaves gaps along the edge that let dust and moisture work their way inside, and the panel will usually lift again at a corner within days. A fresh gasket restores an even bond all the way round and pulls the panel back down flush with the frame.

Supplied with a peel-off backing on both faces. Position the strip on the frame, remove the top liner, then seat the glass and apply even pressure while the bond sets. Suitable for busy workshops and for anyone tackling a back glass at home, and worth keeping a few spare given one is used on every panel that comes off.

Fits:
iPhone 18 Pro

Package Content:
1 x Rear Panel Adhesive For iPhone 18 Pro