Screen Adhesive For Google Pixel 10 Pro Display Bonding Glue Strip

This screen adhesive is a die-cut bonding strip made for the Google Pixel 10 Pro. It sits between the display and the phone frame and holds the screen firmly in place once it has been refitted.

When a display is lifted for a battery, screen or charging port job, the original adhesive tears and the screen will not sit flush again without a new strip. A pre-shaped adhesive means no cutting or trimming tape to size, and the screen goes back down evenly all the way round.

The strip follows the outline of the Google Pixel 10 Pro display so it lines up with the edge of the frame. Peel the backing, place it on the clean frame, remove the top liner, then press the screen down and hold it under gentle pressure for a few minutes.

Clean away every trace of the old adhesive with isopropyl alcohol before fitting and make sure the frame is completely dry. A light clamp gives the best bond.

Made for the Google Pixel 10 Pro only. Other Pixel models use a different shape, so please check your model before ordering.

Package Contents:

• 1 x Screen Adhesive For Google Pixel 10 Pro