My location: United States
Previous image
MFC Dongle
Next image
Zoom image

MFC Dongle

MFC Dongle can crack the user password on iPhone 4 4s 5 5s 5c, 6, 6 Plus (V7.1.1/ V7.1.2) and HTC Android and Samsung Android Mobile Phone (V4.3+) and also ios 8.0 to 8.1 using the included ios8 adapter

In stock (22 items available)
  • $194.77
Qty:  
  • Weight
    0.1 kg
  • SKU
    Mfcdongle
MFC Dongle
 
Full Version Packaged with free iOS8 Adapter
 
A screen lock passcode is a good security measure. If you forget this passcode, One last-resort solution to this is resetting your device which deletes all your data and reverts the device to factory settings. 
 
However, by using MFC Dongle you can crack the user password without losing any user data.
 
MFC Dongle can crack the user password on iPhone 4 4s 5 5s 5c, 6, 6 Plus (V7.1.1/ V7.1.2) and HTC Android and Samsung Android Mobile Phone (V4.3+) and also ios 8.0 to 8.1 using the included ios8 adapter
 

Supported Devices:

  • Apple iPhone 4
  • Apple iPhone 4s
  • Apple iPhone 5
  • Apple iPhone 5s
  • Apple iPhone 5c
  • iPad
  • MacBook
  • Samsung Android based Phones
  • HTC Android based Phones

 

Supported Versions:

  • iPhone / iPad / MacBook ≤ 7.1.2
  • Samsung HTC 4.3+
 
How it works

 

About Samsung Android 4.3+ tested on Samsung Galaxy S5
  • Request for Version 1.0.3 or newer
  • This update will try 5 codes then 30 seconds of waiting
  • About 40 seconds / 5 codes (22 hours to try all codes) in some mobile phones the delay between codes will increase up to 10 seconds with more wrong codes so delay between codes must be around 10000ms(10seconds) so the waiting time will be 44 hours not 22. You must adjust the delay accordingly.
  • How to:
    • Connect the light sensor to the darkest place on the screen
    • Insert MFC dongle
    • Wait until unlock is ok (usually the MFC dongle will stop at that point)
    • Press read in MFC dongle update software and connect MFC dongle to computer to read the unlock codes

 

About HTC Android 4.3+ tested on HTC One

  • It will try 5 codes then wait 30 seconds while keeping the screen on ,about 40 seconds for 5 codes (22 hours for all 4 digits possible codes)
  • How to:
    • Unlock phone and go to the phone lock screen and insert MFC Dongle, Future update ... add code detection using light sensor

 

About Apple iPhone Version iOS 7.1.1 ?

  • Using this method unlock time si maximum 13.5 hours for all 9999 possible codes (1 codes each 5 seconds)
  • How To:
    • update MFC dongle using Update 1 - iOS 7.1.1
    • write the appropriate settings using the software (the delay in milliseconds is 5000 for iOS 7.1.1) 5 seconds / code
    • connect the light sensor to the phone in a blank area (blue)
    • put a sim card inside the phone
    • call the sim card number
    • answer on the iPhone then go to Contacts
    • when the lock code is required insert MFC Dongle
    • if you get the message accessory not supported just press ok. Another message might also appear after first minute so you need to press ok to that too otherwise you might miss some codes during the time the message is displayed.
    • when we reach the correct code the screen will change to Contacts screen thus triggering the light sensor and the process will stop
    • you can now connect the MFC dongle to computer and click read button.

 

About Apple iPhone Version iOS 7.1.2 Auto Method ?

  • This will be request for Version 1.0.3 or new version.
  • This update will automatically try to find the code and require no user intervention.
  • Just connect MFC dongle to phone and unlocking will start.
  • The light sensor must be connected in such a way that after unlocking is done the light sensor will detect more like that initially detected. Usually this can be achieved if the light sensor is placed in the left top corner, where the message icon will be displayed after unlock.
  • The delay must be at least 4500 for correct function.

 

About Apple iPhone Version iOS 7.1.2 manual Method (phone is disabled)?

  • This update will help you unlock your phone code even if the phone is disabled after too many retries.
  • The default delay for this update is about 4300 ms (4.3 seconds).
  • Update your MFC dongle using this update and connect the light sensor on the top right side of the iPhone screen.
  • Go to the phone disable screen and connect MFC dongle to phone and wait 5 seconds.
  • Swipe with your finger to go to Emergency calling.
  • The MFC dongle will automatically detect the swipe and try the next available code.
  • Then the phone will automatically come back to the phone lock screen.
  • To continue swipe again to the emergency screen and so on until your phone is unlocked.

 

FAQ

How to get the latest Version for MFC ?

  • You must log in to www.mfcbox.com
  • Go to Download page
  • Download the MFCDL tools
  • Open the MFCDL.exe Press Start button to get the new version

 

Why can not download ?

  • First you must register an account on our site with valid Email , and verify your account with Token code (This code will be received by register email)
  • Once the email verified, then you can go to login page access to site
  • At User Dashboard please click Manage Memberships , Press Activate Membership buttons, then you will have full download permissions.

 

How to install the software & first update ?

  • Install Dongle Drivers from DongleDrivers directory by running InstallDriver.exe This will install mfc120.dll required for the program to start.
  • Install vcredist_x86 for 32 bits windows or vcredist_x64 for 64 bits windows from MicrosoftRedistributables directory
  • To install the dongle update driver you need to connect MFC dongle to computer in BOOT MODE (you can open notepad.exe first so all the oputput from MFC dongle will be written there). This will install libusb0.dll driver required for the program to start. In order to connect MFC dongle in BOOT MODE you need to connect GND pin P0(P zero) pin together using the RED cable we provided in the pack.
  • Disconnect MFC dongle.
  • Open the software and select the appropriate update and thick update.
  • Connect the MFC dongle again to computer and wait until update finishes. If program stops at [warn] > waiting for reconnect ... then you can take out the MFC dongle and connect again to computer.
  • Now you can write the settings if you did not do that at previous steps.

 

During unlocking the device battery finished
During unlocking the device battery finished what can i do ?

  • Q . You need start to from beginning ?
    A . No , you no need to start from beginning, Dongle will auto saving the last code.
     
  • Q. What's the next step ?
    A. You just need to recharge the device, Then back to work.
 
Package Contents:
  • MFC dongle
  • Free iOS8 Adapter

Worldwide Delivery available on this item.

We offer multiple delivery methods for this item, add the item to cart and checkout to view and select your desired shipping method.

Customer reviews
Average rating:

Score: 5.00 (votes: 1)
Rating of votes (1)
5
 
1customers
4
 
 
0customers
3
 
 
0customers
2
 
 
0customers
1
 
 
0customers
 
There are no comments yet. Be the first to leave a comment

We accept the following payment methods:

We also accept telephone orders, Purchase Orders and Bank transfer payments.

 

Returns Policy

At FoneFunShop Ltd. we have every confidence that you will be delighted with your purchase. However, in the event that you wish to return any goods purchased, then please follow the applicable policy detailed below.

 

Unwanted Goods - within 14 Days

You (the buyer) pay for return shipping fees.

You should inform FoneFunShop Ltd. in writing, within 14 days of receiving your item(s) either by post or by using the contact form of any return request.

You can return unwanted items within 14 calendar days of delivery and we will refund you the price paid for the items. In addition to the refund on your items; if your return request is received within 14 days of delivery, and items received within the following 14 days, then we will refund the cheapest, standard delivery option to you, unless there is another item on your order. Outside of 14 days from receipt, refunds for non-faulty returned items will not include the original delivery charge or the cost of delivering the items to us.

If you return a product to us that is not received in a brand new condition we reserve the right to return the product to you, or issue a partial refund with a deduction because the item is not fit for resale.  You should only handle the item as if you were in a high street store viewing the item as you normally would. it should not be opened or used.

 

Returns Exclusions (Unwanted Goods)

Please contact us by phone +44 (0)114 2437800, or by using the contact form and inform us you wish to return an item(s)*

*These terms do not affect your statutory rights.

Unfortunately we cannot refund or cancel Personalised Orders or Orders Made To The Buyers Specification
Orders containing personalised items or to the buyers specification cannot be cancelled , this includes unlock codes and iPhone unlocks. whereby the buyers IMEI number is considered unique to the order and has no resale value. 
Unlock codes and iPhone unlock services are based on the unique imei number of the customers phone, and are considered as a "made to a consumers specification" order.
These orders cannot be cancelled as they have no resale value.  For example, an unlock code for john's phone would not work on jane's phone, because the 2 phones have different imei numbers. the code would simply fail on all other phones except johns.  We have to order and pay for these codes from our suppliers for the customer once they place their orders online and supply their unique imei number, the codes are no good for anyone else so they cannot be resold to a different customer.

 


 

Faulty Goods - within 30 Days

If your goods are faulty on arrival, you have 30 calendar days from receipt, in which to inform us of the fault in order to claim a full refund or exchange or repair exchange, (please note that for our business customers, different terms of sale apply), after 30 days your return will be processed under the terms of the Manufacturers’ Warranty (See below).

Goods should be returned in their original packaging complete with all accessories and documentation. Once we have verified the fault, we will conduct a repair, or issue a replacement, or full refund to you via your original payment method. We test returned items, and if our technicians find a returned item is not faulty or has been tampered with, we will return the item to you ( In certain circumstances, faults will need to be diagnosed by the manufacturers of the item before a replacement can be issued – i.e. memory card reading faults, item not powering up etc.). In this instance you will be liable for the return carriage.

Goods outside 30 calendar days shall be issued with a replacement or repair only depending on the warranty length of the product.

If a refund is required, Refunds for faulty goods will be issued back to the original payment method.

If your order was only for one item and this item has been returned then the refund cost you paid to receive this order will also be refunded.

If your order contained multiple items and you are not returning all of them, then the cost of shipping your order to you will not be refunded.

Any returns should be marked as "Returned Faulty Item" on the parcel or jiffy bag etc.

If you need to return an item, please notify us first via live chat or the contact page before using the returns form on our Returns Page

 

 

Returns Exclusions (faulty goods)

Unlocking box's and Dongles that are registered by the buyer and  becomes faulty we will offer to replace or repair it depending on the warranty length of the product.

Unfortunately we cannot refund any unlocking box or dongle that has been used to unlock  phone, we contact the manufacturer of the tool returned to check this prior to refunding or cancelling. However if faulty we can offer to replace or repair it depending on the warranty length of the product.

Unfortunately we cannot refund or cancel Personalised Orders or Orders Made To The Buyers Specification
Orders containing personalised items or to the buyers specification cannot be cancelled , this includes unlock codes and iPhone unlocks. whereby the buyers IMEI number is considered unique to the order and has no resale value. 
Unlock codes and iPhone unlock services are based on the unique imei number of the customers phone, and are considered as a "made to a consumers specification" order.
These orders cannot be cancelled as they have no resale value.  For example, an unlock code for john's phone would not work on jane's phone, because the 2 phones have different imei numbers. the code would simply fail on all other phones except johns.  We have to order and pay for these codes from our suppliers for the customer once they place their orders online and supply their unique imei number, the codes are no good for anyone else so they cannot be resold to a different customer.



 




Replacements & Refunds

Where applicable, replacement or alternative items will be processed as promptly as possible, but please be aware that it may take up to 10 working days to issue the item. If an item is out of stock, it will then become a priority back order to be shipped once stock is available.

If you are eligible for a refund, we will refund you back to the payment method you used when you originally paid for your order. Please note: It is your responsibility to notify us of any changes to your card details i.e. you no longer have that account. Refunds can take up to 30 days to process. Refunds by credit card are made to the same credit card that was used for the original purchase*.  Refunds by Paypal will be refunded back to the original Paypal payment account.*

Any return that is not accompanied with the returns form or returns reference number will be held by FoneFunShop for 30 days, awaiting the return of the completed form. Items that have not been reclaimed by you within this period will be disposed of after this time and will result in the return being completed without action.

*These terms do not affect your statutory rights.

 


 

Warranty

Where a product develops a fault, a repair or replacement will be offered, as long as the item is within its manufacture warranty timescale.

Where a product develops a fault outside its manufacture warranty timescale, we will try to help by offering a chargeable repair if possible, or if not possible you would need to purchase the replacement item at the current value.

 

 

 

 

June 15
MFC 2.2 is now available. We are encouraged all customers to use this version.
The full list of changes are here:
Add Apple Watch S2 Full Support by iBUS S2 Tool (World first)
Add Apple Watch USB multiplexor customize driver by MFC TEAM
Add Force Msgtyepes function to keep flash iDevice by old way
Add Preventing update baseband function (update BB)
Add IPR function support 10.3.2 for activated iDevice (Read iCloud passcode) (World first)
Add Apple Server Block local IP check function (IPR)
Improve Update /Restore iDevice without usb data cable by mfc software
Improve Apple Watch S0 / S1 3.x update function by iBUS S1 Tool
Improve Apple Watch S0 / S1 3.x restore function by iBUS S1 Tool
Improve MFC Software S/N Detection issue
Major refactoring to the configuration file for mfc software
All old client version stoped on server
Server side update to support new client v2.2

 

February 25
MFC Dongle Full installer V2.1 released
The full installer including version 2.1 upgrade software and drivers etc. you can download that from mfcbox.com support section.
The full list of changes are here
Add IPR function support 10.2.1 for activated iDevice (Read iCloud Details)
Add iWatch V3.x Firmware Full Support
Add Restrctions password option for activated iDevice (Required 10 Credits)
Add Diag Flash function option
Add display more data when Read Info, Eg. iCloud Account and more
Improved software login issue
All old client version stoped on server
Server side update to support new client v2.1
 

 

January 27
MFC Dongle 2.0 Release Candidate 1 is now available (For iCloud) !
MFC V2.0 Release Candidate 1
A bugs fixed version form 2.0
The Changes are here
New database models added for iOS 10.2+
Solved crash for old models iPR (iOS <10.1)
Server side update to support new client 2.0 RC1
 

 

January 21
MFC Dongle 2.0 Version Released - For iCloud、iWatch (iBUS) and more
Today , Were very pleased to announce the release for MFC Dongle V2.0. This contains numerous new features and bug fixes. There are also some gui fixes which well describe in more detail after the release is out.
The full list of changes are here
Fixed bugs for IPR function (eg, iOS 10.0.3) for activated iDevice (Read iCloud Details)
Fixed Automatically detection function bugs for Recovery Mode iDevice
Improved IPR takes a lot of memory issues (Now 30MB Maximum)
Improved IPR decryption speed (10 times faster than before)
Add iWatch S1 Flash function using iBUS (Safe Flash no data lost)
Add iWatch S1 Restore function using iBUS
Add iWatch S1 displays a red exclamation point repair function
Add iWatch S1 New Glass Digitizer Reprogramming function
Change iMFC gui layout
Server side update to support new client 2.0
 

 

January 2
MFC 1.6.0 beta2 Version is now available
MFC Dongle V1.6 Beta2 Released
Add iPR function to support all iOS 10 - 10.2 for activated iDevice (Unlock iCloud ID)
Add Smart & Fast & Automatically detection function Once iDevice attached
Add One time extract dmg function for same model flashing in same time
Add fast detection function once iDevice Entering DFU Mode for All iOS 10.x
Fixed DFU Mode flashing function bugs
Fixed extracted dmg file bugs
 

 

December 08
MFC Dongle 1.6 Beta Version
Add iPR function support iOS 10.1.1 for activated iDevice (Read iCloud Details)
 

 

November 14
SHP - Smart Heating Platform Official Version 1.0.5 Released ! (Important Update !!!)
Were proud to announce the release of SHP 1.0.5. This is a maintenance release focused on resolving issues within the software. And weve added a few features with better stability and practicability.
Disabled user intervention while updating to prevent failed updates
Improved usb communication routines (including the ones for writing settings, Software was tested again on old &new Intel and AMD computers)
Added computer sounds alert after successful (1 short beep) or failed (4 short beeps) apply settings
Added new firmware v6 with improved communication functions
Firmware V3 removed from software
Server side update to support new client 1.05
About SHP - Smart Heating platform
Smart Heating Platform (SHP) is the best professional toolkit for your electronic hardware repair needs. It offers many indispensable functions and makes working in a professional repair shop much more easy.
All functions are finely controlled using our custom made software control system with real time data display
General settings and operating ambient temperature ranges can be programmed using our software in order to work with or without computer
Has 4 integrated temperature sensors (internal temperature, heater temperature, external temperature and real time temperature tester K Type sensor)
The heating system has automatic temperature control that can keeping temperature constant and accurate while you work
An integrated 4 digits LED Display that can display all necessary data including state, temperature and voltages
A built in temperature tester function that can accurately and efficiently measure solder iron and hot air temperature (Measurement range -125 - 1200 ℃, Tolerance ± 1 ℃) in real time . This way you can be sure your rework tools are correctly calibrated and working at peak performance
Heating panel A made from high purity copper with an efficient method for high heat flux design
Heating panel B made from aluminum can separating glass etc(Compatible size for 13 inch and below)
With panel B can use for baking、drying、aging etc (Eg.water-flooded components of UMT mainboard)
Almost all current PCB integrated circuits can be soldered and de-soldered without the need of a soldering iron or a hot air gun. (Eg,Apple A7 A8 A9 A10 CPU 、baseband IC or harddisk IC etc)
Can act as a pre-heater for your everyday needs to minimize the risk of component damage
Smart phones, iPad productss glass lens, touch screens & LCD displays can be separated in a few mins
Default factory settings with general working conditions specification (Eg. Glue remove、IC de-soldering & Soldering、lens & touch screen assembly settings etc)
Integrated self-resetting overheat protection
LED warning alerts and sound alerts
Voltage overload protection integrated
Short circuit detection integrated
Automatic shutdown function integrated
All functions are user customizable
Lifetime free software upgrades and more
 

 

July 28
MFC Dongle V1.5.0 & Hw Unlocker V1.03 (Unlock Huawei)
Whats different between MFC & HW about Huawei Unlock ?
There is no different with all functions. MFC required MFC Dongle and Hw unlocker is free software without any hardware but need activation account. and both software using different credits also price a little bit different.
Warning: Please dont use MFC or Hw software if you dont know what you are doing now
About MFC:
Were happy to announce the release of MFC 1.5.0 Version, This is a major update to the software.
Changelogs for MFC Dongle V1.50 ?
Add Support all Huawei Hisilicon based Mobile Product
Add Read general information, Eg, VID/PID/ChipID/Verdor etc
Add Finder Direct Unlock in normal mode
Add ID Account Active Required Mode Direct Unlock
Add Simlock Check & unlock
Add Fastboot Check & Direct unlock & Relock
Add Root Check & Direct unlock & Relock
Add one button do Factory Reset
Add one button do Customer Reset
Credits Costs:
OPERATION_FOR_AUTHORIZE, - 25,
OPERATION_FOR_SIMLOCK_REMOVE, - 10,
OPERATION_FOR_FBLOCK_0, - 15,
OPERATION_FOR_FBLOCK_1, - 15,
OPERATION_FOR_FRPKEY_ERASE_WITH_DOG, - 20,
OPERATION_FOR_FASTBOOT_UNLOCK, - 15,
OPERATION_FOR_FINDER_OFF, - 20,
OPERATION_FOR_ROOT_ENABLE, - 15,
OPERATION_FOR_ROOT_DISABLE, - 15.
 

 

June 29
MFC Server side iMFC function updated
MFC Server side iMFC function updated:
IPR Credit Cost changed for all models
iDevice identify database updated
Add iPhone SE / iPad Pro Read iCloud data
Add iPhone SE / iPad Pro Restore & Update & flash & Repair
and some more also some small bugs fixed
 

 

February 06
MFC iCloud Status Checker update
Response time improved (Server Side).
Support (Clean/Lost/Gsm Lost/Stolen & FMI ON/OFF Check)
So the time solve an IMEI is About 1 mins or less...
But if something wrong will be 10 mins Max
 

 

January 30
MFC Server Side API updated
MFC Server Side Api updated:
Add "GSM LOST" Status for iCloud Checking
The same imei re-check free time changed (From 24 hours to 4 hours)
PS, if you have unlocking server welcome to using our API.
 

 

January 19
MFC V1.40 Version Now Ready - (Unlock iDevice iCloud ID)
We're happy to announce the release of MFC 1.4.0 Version, a few known issues has been resolved.
Warning: Please don't use MFC software if you don't know what you are doing now
Changelogs for MFC Dongle V1.40 ?
Main iCloud ID Passcode More than 30 will not ChecK
Main iCloud ID eMail account verify bugs fixed
Display Credits logs bugs fixed
Service Side API updated (IMEI Status Check for iCloud)
 

 

January 19
MFC 1.3.9 Version is now available (Get The iCloud ID so Easy)
Were happy to announce the release of MFC 1.3.9 Version, Altogether many issues have been resolved. This is a major update to the software.
Warning: Please don't use MFC software if you don't know what you are doing now
Changelogs for MFC Dongle V1.39 ?
Pre Version did not show Main ID Account bugs improved
If App Store account different with Main ID Account take credits bugs improved
Add iPR (iCloud Data Recovery) new algorithm
Only Main ID account passcode be able to login then shows details
Only Main ID account passcode not expired then shows details
Only Main ID account passcode verified on "i-Server" then shows details
Add Find Main ID eMail account passcode function
Only Main ID account passcode Changed then Check
Only Main ID account eMail already set on Device then Check
Only Main ID account eMail passcode be able to login then shows details
Add Find Restrictions Passcode function (Including IPR) for all iDevice
if already set then shows details
 

 

December 29
MFC Dongle Version 1.38 full released
Changelogs for MFC Dongle V1.38
iPR (iCloud Data Recovery) algorithm function improved
Add iPResult.txt logs under iBackups\UDID\Snapshot
Enable to display Old / New iCloud Account
Fix memory managing process did not exit issue
[status][info] Starting ...
[user][info] Post processing data ...
[user][info] Creating new instance ...
[user][info] Processing data ...
[user][info] Analyzing ...
[user][info] Processed 136/136 ...
[user][info] Processed 25/25 ...
[user][info] Processed 15/15 ...
[user][info] Processed 6/6 ...
[user][done] Data for xxx@xxxx.xx is xxxxxxx ----Account and Passcode
[user][done] No valid found for xxx@xxxx.xx ----Account
[user][info] Done
[user][done] Done.
 

 

December 27
MFC Dongle Version 1.37
iPR function improved
[status][info] Starting ...
[user][info] Post processing data ...
[user][info] Creating new instance ...
[user][info] Processing data ...
[user][info] Analyzing ...
[user][info] Processed 136/136 ...
[user][info] Processed 25/25 ...
[user][info] Processed 15/15 ...
[user][info] Processed 6/6 ...
[user][done] Data for xxx@xxxx.xx is xxxxxxx ----Account and Passcode
[user][info] Done
[user][done] Done.
 

 

December 22
MFC 1.3.5
ADDED:
iPRecovery Function support all iOS iDevice
(This function Require Credits)
Supports iPhone / iPad / iPod
!! IMPORTANT PLEASE READ !!!
This function allows you to read directly from any iPhone or iPad or iPod its iCloud username and password using physical connection to MFC Dongle
To use this function the device must be fully functional, ie. you can gain access to menu to make calls/sent sms etc etc.
You cannot do this if the iphone has a passcode in place
You cannot do this on a device that is asking for icloud login to proceed to setup the iPhone from new, like after factory reset or iTunes Restore

 

 

November 23
MFC 1.3.1 Version Released
Changelogs for MFC Dongle V1.3.1 ?
Add Backup/Load/Clear history Fucntion in iMFC
Add authorization Login function (Official Website Access)
Add Check IMEI (Clean/Stolen) Function Free (World First)
Add 5 FREE Credits for each MFC User
Add Credits Recharge function / operation logs
Add Stop Button for some operation in iMFC
Add i4 Patch (Bypass iCloud ID in DFU or Normal mode (Normal mode require iDevice jailbroken+openssh installed)
improving Bruteforce function to be more stable
improving 6s/6sp FDR issue during flash
Remove Do Jobs button in info interface
For Jailbreak iDevice (jailbroken+openssh installed)
Add one button Read iCloud Account (World First)
improving Change info function to change phone basic information, Eg. model / Color etc.
improving hide / show application icon function
MFC software interface changed
Other small reported bugs fixed
 

 

November 04
MFC Server Side updated
This update fixed bugs for arabic language phone when you bruteforce the passcode.
For iOS 7.x - iOS 8.1 version.
Updated Options:
iOS7.x V2.2
iOS8.x V7
 

 

October 02
MFC Dongle Ver. 1.2.9 Beta 3
Changelogs:
Some Gui issue casing crash bugs fix
SSH detection bugs fixed
Add iPhone 6s / 6s Plus support on iMFC
Add Refesh button in history tab to detecting iDevice
Others small bugs fixed.
 

 

September 30
MFC Dongle Ver. 1.2.9 Beta Official Released
Changelogs for MFC Dongle V1.2.9 beta ?
Change iDevice Tools to iMFC
Add iDevice information fast detecting (IMEI/MEID/UDID/ECID) function
Add Jailbreak phone status checking
Add Multi iDevices (5 pieces) operating in same time (World First)
Add history recording / checking by Real-time logs
Add support all iDevice custom IPSW flash
Add iDevice status (Normal / Recovery/ Restore etc) display during opreating
Add Backup iDevice SHSH file function
For Jailbreak iDevice
Add one button delete iCloud Account
Add SSH tunnel function to using USB Cable managerment phone Data
Add Bruteforce SSH passcode function (World First)
Add hide / show application icon function(World First)
Add Change iDevice model information function
Add Hotspot ON/OFF function
Add Backup all iDevice data in one time(World First)
MFC software interface changed
Other small reported bugs fixed
 

 

July 18
MFC Dongle V1.2.7
Jailbreak:
Automatic identify if iPhone / iPad / iPod (iDevice) is Jailbroken
If device is jailbroken you can then perform the following functions:
Brute force unlock passcode on all iOS8 (8.0-8.4) Jailbreak iDeivce
Brute force unlock passcode on all All iOS8 (8.0-8.4) disabled Jailbreak iDeivce
Support unlocking mutli Jailbreak iDeivces in same time
Easy to use - just need one button "Find Code" press
Unlocking Jailbreak iDeivces no need disassemble
Unlock using original data cable
Unlock Code direct shown on iDevice Screen

iDevice Tools Changelogs:
Read iDevice function improved
Flash function for new iOS Device improved
iDevice Tools GUI bugs fixed
Add Activate / Deactive function
Add Syslogs Debug function

 

May 30
MFC Dongle Version 1.2.6 Update Released (iOS 8 Unlock And iDevice Tools)
Changelogs for MFC Dongle V1.2.6 ?
iDevice Changelogs:
iDevice iOS 8.x :
"iOS 8-8.1 auto V7" option (Detection Value Display on Phone Screen)
Add "Sirtpe Pattern" Use to Put MFC light Sensor (World first)
Add Light Sensor Current Detected Status Value "L"
Add MFC LEDs Activating Fast Blinking Mode Function After Code Found
Change Phone Communication Current Detected Status Value "S"
Change Phone Current Detected Code Value "Code"
Screen Message display time Improved
V7 Firmware updated on Server
iDevice Tools Changelogs:
Add User /System Applications Read Function
Add User /System Applications Update Function
Add User /System Applications Install Function
Add User /System Applications Uninstall Function
Add One button Restart iDevice Function
Add One button ShutDown iDevice Function
Add One button Read iDevice Diagnostics info Function
Add One button Read iDevice Time info Function
Add One button Sync iDevice Time Function
Add One button Set iDevice Time Function (Beta)
And More....
MFC Tools Changelogs:
Add useful /Help Link
 

 

May 20
MFC Dongle Version 1.2.5 Released - iOS 7 & iOS 8 & MacBook
MacBook Changelogs:
Add EFI Boot Mode v2 option (New)
Add support different character Keyboard (World First)
Add Black Background Device unlock supported (World First)
Add Old & New Sensors Working supported
Add the Alphabet function
Add Clear memory logs function
iDevice Changelogs:
iDevice iOS 7.x :
Add iOS 7 auto V2.4 option (New)
Add light sensor connection status checks
The Most Used 20 codes function changed (1004 issue)
iDevice iOS 8.x :
Add iOS 8-8.1 auto V7 option (New)
Add Delay waiting Phone to charge function for each 50 reboots (World First)
Add light sensor connection status checks function
Add POWER/HOME button connection status checks function
iDevice Tools Changelogs:
Add Read iDevice Full Information (IMEI & Serial) (World First)
Graphical User Interface response time bugs fixed
MFC Tools Changelogs:
Add Customize Calculator to set up the correct delay time for iOS 8-8.1 auto V7 (World First)
Others Changelogs:
Fixed bugs on Windows XP
Some settings bugs fixed
Other small reported bugs fixed
 

 

April 30
MFC Dongle Version 1.2.3 Released ! iDevice Flasher and More
Were Very proud to announce the release of MFC 1.2.3. This update adds new functionality to your MFC Dongle.
Changelogs for MFC Dongle V1.2.3 ?
Add iOS 7.x V2.2 2015-4-19
Enable the Alphabet function
Add iDevice Tools
Update / Restore /Download IPSW Function Added
SetMode in bata (Normal/DFU/Recovery/Restore)
Add iPower Test Function
Add MFC Tools
Read S/N function Added
MFC software interface changed
MFC software Online Manual Updated
Other small reported bugs fixed
Upgrading to new Versions:
We recommend all customers to upgrade to this latest version 1.2.3. The downloaded version of the software is available now, You can download from support page with valid membership.

 

April 25
MFC Dongle Server update for iOS 8 Auto V6 Turbo Mode
Whats New ?
The Turbo Mode algorithm improved
How to ?
Just update MFC Dongle Via Auto v6 If you unlock IOS8
 

 

March 24
MFC Dongle V1.2.2 Turbo Mode Released
Were Very proud to announce the release of MFC 1.2.2. This update adds new functionality to your MFC Dongle.
Add iOS 8.0-8.1 Auto V6 (World first New Solution Turbo Mode)
Can Auto Detect Passcode Attempted
Add new algorithm Auto adjust unlock speed (Per/Reboot input code 1 ~ 5 Times)
Add iOS 8.0-8.1 Auto V6 TEST (Learning mode)
Other small reported bugs fixed
 

March 14
MFC Dongle Version 1.2.1 for IOS8.0 - 8.1

Add iOS 8.0-8.1 Auto V5 (World first New Solution)
Add iOS 8.0-8.1 Auto V5 TEST (Learning mode)

This Update requires testpoints (advanced users only)

Please use MFC support forum for more help with this method

 

How to Test Point ?

We need Connect this TP (Test Ponit) to iPower Adaptor Boot PIN P0. and to testpoint on phone

 

 

iPhone 6 / 6 Plus Test Point:


iPhone 5s Test Point


 

About the testpoint
This solution should be working for iPhone 4S / iPod Touch 5 / iPad Air / iPad mini Retina ( iPad mini2 ) / iPad 4 / iPad Mini / iPad 3/ iPad2 .
As we can see , i only list TP for iPhone 6 / 6 Plus and iPhone 5 5c 5s at here, So please help us, if you can do something for this.
(To help us, you will be coming our Beta version tester)
But almost the TP are same position, Hope when you working on other models, Take some pictures to Sharing here.

How to find the TP ?
A. Power on your Device
B. Using multimeter + - , Touch one of the multimeter - probes (Black color) to Phone GND. Using + probes (Red Color) to touch the Home Button flex cable connectors pins or home button rearface welding spot. Once you saw the Device Screen start to Changing or Device Voice Control actived. Congratulations ! Thats the Test Ponit we need to use.

 

About iOS 8.0-8.1 Auto V5 & V5 TEST
Testing & Demo Only ! (Learning mode)
This testing will NOT try to INPUT code to Device. It will works in the same way as the iOS 8.0-8.1 Auto V5, so you can check all the connection if connected ok, which will reboot the device and display the xxxxRUN code Message etc, each reboot that should be increasing, which means working procedure working perfectly and connection is good. then you can reprogramming the Dongle Using iOS 8.0-8.1 Auto V5 to unlock your Device

V5 Auto Mode has a new radical way to unlock your phone code using HOME button automation. This update does not require any delay setting. Only programing the first code is enough.While unlocking the phone POWER button must always pressed.

How to use:
- DO NOT DISCONNECT THE BATTERY OF THE PHONE, this way the phone will never loose the correct time. Wait for phone to exit phone disabled mode (if allready in Phone disabled XX minutes you need to wait until the phone gets out of this mode, then restart the phone manually first )
- Power on the phone normally
- Permanently press the POWER button using a custom tool
- Connect 3 in 1 charging cable to phone and to iPower adaptor.
- Connect the HOME button wires accorting to the specifications in our support section.
- Connect micro usb to iPower adaptor
- Connect MFC Dongle to iPower adaptor and the unlock will start
During unlock some messages are displayed to the user if the phone is not in iCloud lock mode.
The messages start with the current code (XXXX) as following :
XXXX RUN - MFC is running normally
XXXX TRY - An communication error (usually when the phone battery is very low) has been detected.
MFC will reTRY
XXXX COM - MFC is connected in COMputer mode and will not try to send codes
XXXX STA - MFC will start the unlocking procedure. This is the STArt
XXXX CHE - MFC is CHEcking connections, this is dispalyed only the first time when you connect MFC
to phone.
XXXX OK! - Code has been found. You can try to reconnect MFC and see if the code found is really the correct one or has been detected because of a sensor communication error.
Important Note!
Never try to input the code by hand if you want to try some unsure code to test if can unlock the Device, The way you can write the start value by reprogramming the Dongle and do it.because if the code is wrong your Device might get disabled.
 

Here is the new interface for Version 1.2.1, Just imaging our power!


MFC made a simple picture to let all people to understand easily :

 

March 11
MFC Dongle Version 1.2.0
Released for iOS7&8.
Were proud to announce the release of MFC 1.2.0. This update adds new functionality to your MFC Dongle.
Changelogs for MFC Dongle V1.2.0 ?
Add iOS 8.0-8.1 Auto V4 (New)
Added unlock function if xx message appears on the device’s Lock screen (World first)
Try again in 23 million minutes bugs fixed
Fix some IOS Version detection Bugs
Update Read iDvice function to detect out more data (Beta Version) (Free)

 

March 6
MFC Dongle V1.1.9 Add iDevice iOS Version identifying function for FREE
Added
iDevice iOS Version identifying function for free
[info] Searching for iDevice ...
[info] Found device in Normal mode
[info] Identified device as iPhone 6 Plus iPhone7,2
[info] iOS version 8.1.3
Other small reported bugs fixed
 

 

 

February 28
MFC Dongle Version 1.1.8 for IOS8.0 -8.1
Were proud to announce the release of MFC 1.1.8. This update adds new functionality to your MFC Dongle.
Changelogs for MFC Dongle V1.1.8 ?
Add iOS 8.0-8.1 Auto V3 option (New)
Solved communication bugs
Improved sensor detection aglorithm
Add Extra Alphabet function for IOS8 V3
Other small reported bugs fixed

 

February 14
MFC Dongle Version 1.1.7 for IOS8 specially update
We are proud to announce the release of MFC 1.1.7. This update adds new functionality to your MFC Dongle.
Changelogs for MFC Dongle V1.1.7 ?
Add iOS 8.0-8.1 Auto V2 delay option (New)
Added delay time waiting for phone exit disabled mode (try again in xx minute) for IOS 8 V2
Unlock code display on phone Screen function added for IOS 8 V2 (World first)
Active Extra Alphabet function for IOS8 V2
Improving Samsung unlock methods
Rename Samsung option to be Samsung Android 4.x
Connection status bugs fixed
Other small reported bugs fixed

 

January 27
MFC 1.1.6 version is now available for IOS 8 !
Were proud to announce the release of MFC 1.1.6. This update adds new functionality to your MFC Dongle.
Changelogs for MFC Dongle V1.1.6 ?
Added iOS 8.0 、 8.0.1 、8.0.2 、 8.1 to support
Reported bugs fixed
You will need the following tools to work with ios8 devices

 

January 02
MFC Server update for auto v2.3
Whats New ?
To support some phone only have one local keyboard. (World first)
How to ?
Just update MFC Dongle Via auto v2.3
You will get the logs like:
[info] > Entering boot mode ...
[info] connecting...
[data] > Device has firmware version 2.1
[data] > Serial number: 0x88888888
[warn] > Waiting for reconnect...
[info] > Erasing the memory ...
[info] > Starting to upload ..
[info] > Starting the user app ...
[done] OK
 

 

December 14
MFC Dongle Full Installer V1.1.5 Released
Whats including MFC Dongle installer V1.1.5 ?
MFC Dongle Main Software 1.1.5
Related drivers
Full installer Versions:
We encourage all new customers to use this installer, if you dont know how to install driver etc by separate. The downloaded version of the software is available now, You can using the MFCDL Tools V2.0 to get this full installer version.
 

 

December 10
MFC Dongle Repair tools v3 Released
How to use:
Download Repair tools at support page at here
Open the tools and Put your dongle in boot mode
BOOT MODE you need to connect P0 and GND(P zero) pin together (see images below) using the RED cable we provided in the pack.
Input your dongle to computer USB port.
Input the correct sticker serial number from the package
Follow the step disconnect and reconnect the dongle to repair

 

December 09
MFC Server Update for All MFC Dongle
To make all the software more stable , we have updated MFC Server today.
How to :
Connect your dongle with boot mode (GND+P0)
Open the software 1.15 then choose v2.3 and Click Update
Input your dongle and waiting update
You will get the logs like:
[info] > Entering boot mode ...
[info] connecting...
[data] > Device has firmware version 2.1
[data] > Serial number: 0x88888888
[warn] > Waiting for reconnect...
[info] > Erasing the memory ...
[info] > Starting to upload ..
[info] > Starting the user app ...
[done] OK
 

 

December 04
MFC Dongle V1.1.5 released
Were proud to announce the release of MFC 1.1.5. This update adds new functionality to your MFC Dongle.
Changelogs for MFC Dongle V1.1.5 ?
Added iOS 7.1.2 auto v2.3 unlock option ( first in the world)
This will automatically increase / adjustment phone brightness
MFC Dongle connection status function added
Manually Clearing memory logs function added
Reported bugs fixed
 

 

November 25
MFC Dongle V1.1.4 released - unlock iPhone and Macbook
Were proud to announce the release of MFC 1.1.4. This update adds new functionality to your MFC Dongle. Now code is saved even if the phone closes because battery is too low or if you take out MFC Dongle from the OTG adaptor by mistake.
Changelogs for MFC Dongle V1.1.4 ?
Added iOS 7.1.2 auto v2.2 unlock option
Auto save codes function added
Reported bugs fixed
 

 

November 22
MFC Dongle V1.1.3 released
Were proud to announce the release of MFC 1.1.3. This is a maintenance release focused on resolving issues within the software. (Due V1.1.1 and V1.1.2 just for bata testing , so we have not released for public), And weve added a few features with better stability and practicability.
Changelogs for MFC Dongle V1.1.3 ? (All the features are first in the world)
Added iCld 15 Pro Retina unlock option
Added iCld 15 Pro unlock option
Added iCld Custom unlock option
Extra Mouse location settings
More details about settings you can check here
MFC Dongle Server updated
Self testing Area added to verify the output code
Some small feature tweaks across etc.
Reported bugs fixed
 

 

November 12
MFC Dongle Version 1.1.0
This update contains general maintenance updates for Mac Book and MFC Dongle server.
Changelogs for MFC Dongle V1.1.0 ?
Added iCld 13 Pro unlock option (Now you can unlock iCld 13 Pro And iCld 13 Pro Retina)
MFC Dongle Server updated
Reported bugs fixed

 

November 11
MFC Dongle V1.0.9 released ! Unlock Macbook
We are pleased to announce the release of Version 1.0.9.
This update contains general maintenance updates for IOS7.x and Mac Book.
Changelogs for MFC Dongle V1.0.9 ?
Added new algorithm IOS 7.1.2 auto v2.1 option
Added iCld 13 Pro Retina unlock option

 

November 06
MFC Dongle V1.0.8 /MFC Reader V0.1 Released
Were very proud to announce the release of MFC Dongle 1.0.8 and MFC SN Reader V0.1,
This is a maintenance release focused on resolving issues within the software. and added More functions for MacBook unlock.
Whats new for MFC Dongle Version 1.0.8 ?
Added MacBook unlock functions supported
Added EFI unlock firmware for all Macbook
Added EFI Boot Mode options in Macbook tab
Reported bugs fixed
Whats for MFC SN Reader Version 0.1 ?
This tool can be used to read out MFC Dongle Serial Number, use for activation your account only.



 

November 04
MFC Server Update for Version 1.0.7 IOS 7.x V2
MFC Dongle Version 1.0.7
Please using V2 before try to make update, this will be more stable
LOG:
[data] > FWVersion is 18
[data] > New start value 1104 format FFFF with setting 02 delay 5000 ms
[done] OK
[info] > Entering boot mode ...
[info] connecting...
[data] > Device has firmware version 2.0
[data] > Serial number: 0x88888888
[warn] > Waiting for reconnect...
[info] > Erasing the memory ...
[info] > Starting to upload ..
[info] > Starting the user app ...
[done] OK

 

November 02
MFC Dongle Version 1.0.7 Released ! Macbook unlock added
Were very proud to announce the release of MFC Dongle 1.0.7, This is a maintenance release focused on resolving issues within the software. and added the MacBook unlock functions.
Whats new for MFC Dongle Version 1.0.7 ?
Added MacBook unlock functions support (beta only)
Improving the algorithm on iOS 7.1.2 auto v1
Reported bugs fixed
Upgrading to new Versions:
We encourage all customers to upgrade to this latest version 1.0.7. The downloaded version of the software is available now, You can using the MFCDL Tools V2.0 to upgrading to latest version.

 

November 01
MFC Dongle Version 1.0.6 Released
Whats new for MFC Dongle Version 1.0.6 ?
All connecting dongle logs saved by time added, eg. mfc20141102.log
Description for each update inside the software added
Reported bugs fixed
Upgrading to new Versions:
We encourage all customers to upgrade to this latest version 1.0.6. The downloaded version of the software is available now, You can using the MFCDL Tools V2.0 to upgrading to latest version.

 

November 01
MFC Dongle Version 1.0.5 Released
MFC Dongle V 1.0.5 Released Which is covers a number of issues for iOS compliance etc.
This release brings an update to the IOS 7.x for better support. Hot , Very Hot !!
Whats new for MFC Dongle Version 1.0.5 ?
Added automatic update selection when pressing read button
Added automatic update settings adjustments
Added New algorithm for unlock iOS 7.1.2 Called auto v2
Fixed the old version detecting code bugs
Reported bugs fixed
Upgrading to new Versions:
We encourage all customers to upgrade to this latest version 1.0.5. The downloaded version of the software is available now, You can using the MFCDL Tools V2.0 to upgrading to latest version.

October 29
MFC Dongle V1.0.4 Released
Solved many update & connection bugs
Changed all interface to tabs organization
Added a separate READ button to read the settings faster
Other reported bugs fixed

 

October 23
MFC Dongle V1.0.3 Released
Add MFCDL tools Version 1.0 for online upgrade
Add Apple iPhone Manual method for IOS 7.x
Add Apple iPhone Auto method for IOS 7.x

 

September 25
MFC Dongle V1.0.2 Released
This update we have add for Samsung Android 4.3+ and HTC Android 4.3+

 

September 20
MFC Dongle V1.0.1 Released
A maintenance release focused on resolving issues within the software

 


 

his is a guide for the setting up of a new MFC Dongle which is used to read / crack the passwords on iPhones.

 

Preparation

Make a folder on your desktop and call it mfc-dongle
It may be a good idea to disable your antivirus too, or at least exclude this folder in your antivirus, as these files are themidia protected and your av may try to delete or quarantine them.

 

Downloading and installing drivers.
1. Download and unzip MicrosoftRedistributables.zip to the mfc-dongle folder you made
go in the MicrosoftRedistributables folder and install vcredist_x86.exe and vcredist_x64.exe

2. Download and unzip DongleDrivers.zip to the mfc-dongle folder you made
go in the DongleDrivers foldr and run the InstallDriver.exe

To install the dongle update driver you need to connect MFC dongle to computer in BOOT MODE.
Use the red cable to bridge the 2 points together P0 and GND (see images below) and once done, connect the dongle to your PC
Once drivers are installed you can now disconnect the dongle

 

 

 

Downloading Server Client and getting latest software.
Download MFCDL_2.0.exe from www.fonefunmembers.co.uk to the mfc-dongle folder you made
Run MFCDL_2.0 and press the start button
Select the appropriate update and press next, This will then download the software to the mfc-dongle folder

 

Running Software, Reading Serial For Registration
Connect mfc dongle to PC
Run MFC_1.0.8.exe (or higher / newer) you just downloaded
Select any update from the drop down box and tick update, this will read your serial and program your dongle Serial number. this will also program your dongle and now its ready to use.

 

Registration
Go to www.mfcbox.com and register
once registered, login and go to activate memberships
enter your serial number you read earlier then activate your membership

MFC Dongle Support (using the tool, news, and everything else)

Support forum can be found at Here

Related products
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart
    • $36.84

    Not rated yet
  • Drag and drop me to the cart
    • $26.31

    Not rated yet
  • Drag and drop me to the cart
    • $15.78

    Not rated yet
  • Drag and drop me to the cart
    • $47.37

    Not rated yet
  • Drag and drop me to the cart
    • $15.78

    Not rated yet
  • Drag and drop me to the cart
    • $2.09

    Not rated yet
  • Drag and drop me to the cart
    • $294.79

    Not rated yet
  • Product is out of stock
    • $94.74

    Score: 5.00 (votes: 2)
  • Product is out of stock
    • $151.60

    Not rated yet
Customers who bought this product also bought
  • Drag and drop me to the cart
    • $10.54

    Not rated yet
  • Drag and drop me to the cart
    • $1.05

    Not rated yet
  • Drag and drop me to the cart
    • $126.33

    Score: 5.00 (votes: 1)
    1
  • Drag and drop me to the cart
    • $26.31

    Not rated yet
  • Drag and drop me to the cart
    • $47.37

    Not rated yet
Customers who viewed this product bought
  • Drag and drop me to the cart
    • $73.68

    Score: 5.00 (votes: 1)
    1
  • Drag and drop me to the cart
    • $73.69

    Not rated yet
  • Drag and drop me to the cart
    • $84.22

    Score: 5.00 (votes: 1)
  • Drag and drop me to the cart
    • $52.63

    Not rated yet
  • Drag and drop me to the cart
    • $21.05

    Score: 5.00 (votes: 1)